Lonecrow66 Posted February 26, 2011 Posted February 26, 2011 Track IR 5 with latest beta software. I have the track clip pro. Whenever I try and simulate looking down at my radio equipment it locks even in the track IR software the orange light goes off on the bottom right side. It never did that before in the older version. I've moved the viewer it is centered fine... just can't seem to get it to work when you look down and left.. anyone else have this problem? --- May your takeoffs equal your landings!
bengo Posted February 26, 2011 Posted February 26, 2011 Is the TIR-unit still detecting your 3 LED's properly when you move your head in that position? Your mic-boom, your head, or even the position of your clip may prevent your TIR-unit to see three distinctive IR-sources, and then the tracking stops. Please check this in the TIR-software in camera view. i7 6700k/GTX1070-8G/MSI-Z170A Gaming Pro Carbon/32GB DDR4 Kingston HyperX PREDATOR DDR4 3000MHZ Vengeance 1600/TM Warthog #6106/Samsung SB350_S27B350H/OCZ Agility3 SSD 128GB / Win10-64/TIR5
kingpinda Posted February 26, 2011 Posted February 26, 2011 also make sure trackclippro is highlighted and not trackclip which is just above that one. It acts funky using trackclip function with trackclippro.
Lonecrow66 Posted February 26, 2011 Author Posted February 26, 2011 also make sure trackclippro is highlighted and not trackclip which is just above that one. It acts funky using trackclip function with trackclippro. Yep it still sees it.. it just freezes everything in the software and the orange light goes off.. Like I said the only thing I changed was Windows 7 SP1 and the new A10, so I updated to the latest beta track IR software as well. No positions of my chair or anything have taken place.. I'm centered and it can see the 3 little lights in the software. Just bizzare.. It does it sometimes and sometimes it doesnt.. --- May your takeoffs equal your landings!
spike2450 Posted February 26, 2011 Posted February 26, 2011 Hi I've noticed the same, it definately doesn't look down and to the left as well as the other direction, noticed it in black shark as well, their is an improvement if u move the led's away from your head and re-center, when u look down and to the left your head will mask the leds from the camera if it's to close. Regards
kingpinda Posted February 26, 2011 Posted February 26, 2011 (edited) and it sees the 3 little green lights in center of software box also? Did you go from 32bit to 64bit trackir software? try unplugging camera, deinstall trackir, delete driver from device manager when it asks delete driver from hdd click yes, reinstall beta track ir and then plug back in the camera. that way you are sure that the driver shipped with the latest beta is being used. I had some problems with that when going from 32bit to 64bit. edit: maybe try and play with the light filter threshold. in the camera tab. But most importantly make sure the 3 lights are in the center of the box in the software. If your camera isnt precisely in front of you you can also input a camera angle. and if that all fails maybe make the profile a bit more sensitive so you don't have to turn your head all the way to the left. I at most have to turn my head 40 degrees to the left to be able to simulate that i'm looking over my shoulder in game. I also tweaked my profile more sensitive in the pitch down area. This is because I otherwise strain to look down. its much easier to look up than down so i tweaked that in. Edited February 26, 2011 by kingpinda
Lonecrow66 Posted February 26, 2011 Author Posted February 26, 2011 I think it might have been the new software.. I removed the beta and did the normal software and it sorta seems ok.. I'm going to have to test it more. So far it hasn't done it. --- May your takeoffs equal your landings!
kingpinda Posted February 26, 2011 Posted February 26, 2011 ah well if it works for you. I take it you don't use a-10 64 bit then.
Lonecrow66 Posted February 27, 2011 Author Posted February 27, 2011 ah well if it works for you. I take it you don't use a-10 64 bit then. Yeah I do.. --- May your takeoffs equal your landings!
Lonecrow66 Posted February 27, 2011 Author Posted February 27, 2011 Got an email back from support right away (those guys are good) to try a few things, but since i reverted back to a non beta version this is working fine now. --- May your takeoffs equal your landings!
kingpinda Posted February 27, 2011 Posted February 27, 2011 Weird. I havent been able to make Trackir work in a-10 64 without the beta software.
Lonecrow66 Posted February 27, 2011 Author Posted February 27, 2011 Yeah you are right.. it was working perfect in the track IR software but won't work in A10. I finally loaded it up. Damn. I have to use the beta.. --- May your takeoffs equal your landings!
S77th-konkussion Posted February 27, 2011 Posted February 27, 2011 LC.--- http://forum.naturalpoint.com/forum/ubbthreads.php?ubb=showflat&Number=46474#Post46474 [sIGPIC]http://forums.eagle.ru/attachment.php?attachmentid=43337&d=1287169113[/sIGPIC]
Lonecrow66 Posted February 27, 2011 Author Posted February 27, 2011 LC.--- http://forum.naturalpoint.com/forum/ubbthreads.php?ubb=showflat&Number=46474#Post46474 Yeah thats not the problem I'm having though. I didnt know they had a forum though thanks I'll check things out there. It seems beta 5.1.2 worked perfect.. now 5.1.3 does not. I just need to find a copy somewhere of 5.1.2!! --- May your takeoffs equal your landings!
S77th-konkussion Posted February 27, 2011 Posted February 27, 2011 Actually- you might try it. From what I can tell- the uninstall process is not removing some ancient driver dated November 2009. It wreaked various forms of havoc on my track ir- Including but not limited to roughly your symptoms. I'm in the TiR UI now- silky smooth and accurate. I knew that the latest doohickey was installed when I brought up the TiR UI and it's in windowed mode- Before- it always opened up in full screen. [sIGPIC]http://forums.eagle.ru/attachment.php?attachmentid=43337&d=1287169113[/sIGPIC]
kingpinda Posted February 27, 2011 Posted February 27, 2011 Exactly that's why I posted how to delete the old driver... But I don't know lonecrowe has tried what I posted. Think not though. We having been giving quite a few tips. Have you tried all of them or not? REALLY REALLY try the correct install method: Unplug camera, deinstall trackir, delete driver from device manager (you might have to reinsert the trackir because it might not show up in device manager when unplugged) have it deleted from HDD and then reinstall trackir beta and then plug in camera. Have you done this?
Rider1 Posted February 28, 2011 Posted February 28, 2011 Let me throw on more thing out there that is pretty easy to test. ..Had the same problem with the new beta software. I could not look down and to the left to see those panels, it would hang there or just jump around. Was making me crazy. What I did is moved the camera to the left of center by 5 to 6 inches. In the camera view, the three green dots are now all to the left of center line on the grid. I also turned the speed up by one. Now everything is working proper and smooth, left and right side. Rider
xxinyofacexx Posted April 6, 2014 Posted April 6, 2014 over 6 inches only.... and turn the speed up one notch is all I did and now it works good enough for me... weird.
adamski66 Posted August 20, 2014 Posted August 20, 2014 having this problem now... cant view down left. works like a charm to the right.. but.. not down to the left.. very hard to see the radios etc in the a10
Recommended Posts