Shootist Posted March 26, 2011 Posted March 26, 2011 Decided to try the campaign again without radio assist turned on and still cant even get thru to the tower for startup. I dutifully went thru startup with radios set as per startup and changed freq to 140 for Vaz. I looked for some other sort of 'on' switch but found nothing. Repeated called out for startup but still nothing. What am I missing? Asus P8P67Pro, Intel i7, 8gb DDR3, OCZ Vertex3, 120gb SSD, GForce GTX 560, Cooler Master GX850, Win 7, Logi X 3D Pro.
MTFDarkEagle Posted March 26, 2011 Posted March 26, 2011 When you inputted the freq, did you hit the 'load' button? Lukas - "TIN TIN" - 9th Shrek Air Strike Squadron TIN TIN's Cockpit thread
StrongHarm Posted March 26, 2011 Posted March 26, 2011 From the GUI manual pg. 26 Radio Assist. When enabled, you will get audio alerts informing you of incoming missiles, when you are within valid weapon use parameters, and information on the location of enemy units. What you're looking for is Easy Communication. All that really does is choose the proper freq and radio for you.. for the most part. I would suggest reading WarriorX's most excellent Radio Tutorial: http://forums.eagle.ru/showthread.php?t=61349 It's a good thing that this is Early Access and we've all volunteered to help test and enhance this work in progress... despite the frustrations inherent in the task with even the simplest of software... otherwise people might not understand that this incredibly complex unfinished module is unfinished. /light-hearted sarcasm
S77th-konkussion Posted March 26, 2011 Posted March 26, 2011 Switch the band to FM. [sIGPIC]http://forums.eagle.ru/attachment.php?attachmentid=43337&d=1287169113[/sIGPIC]
Shootist Posted March 26, 2011 Author Posted March 26, 2011 Sorry SH. Easy comms is what I meant to say, not radio assists. And, at first I did not hit the input putton but saw it there and hit it and tried to call again to no avail. As for switching to FM. It says its supposed to be 140 am. Asus P8P67Pro, Intel i7, 8gb DDR3, OCZ Vertex3, 120gb SSD, GForce GTX 560, Cooler Master GX850, Win 7, Logi X 3D Pro.
andysim Posted March 26, 2011 Posted March 26, 2011 use the Mic switch (Hotas commands) for selecting AM/FM/UHF ect before trying to talk =)
WarriorX Posted March 26, 2011 Posted March 26, 2011 Shootist, I put this vid together back in Beta 2 or 3 just to show the preset's work, but it should show you the basic steps for getting the comms going. Let me know if you have any problems, and I will be glad to help out. [sIGPIC][/sIGPIC] "Is that you John Wayne?.......Is this me?" Full Metal Jacket //My Mission Data Card//My Cold Start Checklist //Clearing a Hung Store Tutorial //CDU Offset//Asterisk Error Correction Procedure//JTAC UTM Coordinate Entry Tutorial//JTAC 9 Line Lat Long Coordinate Entry Tutorial
Shootist Posted March 26, 2011 Author Posted March 26, 2011 use the Mic switch (Hotas commands) for selecting AM/FM/UHF ect before trying to talk =) THANKYOU ANDY!! Buy the man a beer! I was using the backslash key which brings up the commands that, I guess are only good for easy comms. Using the Hotas Mic, or in my case, Num+or_LAlt., actually shows the commands with title above. IE; VHF AM. And, low and behold, they can hear me. Thanks again for the input, folks. I'd be lost without yas. Asus P8P67Pro, Intel i7, 8gb DDR3, OCZ Vertex3, 120gb SSD, GForce GTX 560, Cooler Master GX850, Win 7, Logi X 3D Pro.
Recommended Posts