hog_driver111th Posted November 20, 2011 Share Posted November 20, 2011 (edited) I really think we need a topic with Ebay listings for those of us interested in building cockpits and looking for parts. You don't have to participate, but if you see something good that you think others might be interested in, post it. I'll start: InterCom Panel - Not in the greatest condition and doesn't have all the knobs as in the A-10, but it's close. http://www.ebay.com/itm/Aircraft-Andrea-Radio-Intercommunication-Set-Control-Panel-C-2106A-AIC-18-/140631773359?pt=Motors_Aviation_Parts_Gear&vxp=mtr&hash=item20be4e90af Oxygen Regulator: I'd actually get this myself since it's super cheap, but I just bought Pitbldr's UFC. http://www.ebay.com/itm/C-130-OXYGEN-REGULATOR-P-N-29255-10A-A5-/190603399929?pt=Motors_Aviation_Parts_Gear&vxp=mtr&hash=item2c60d912f9 A-10 ACES II ejection seat: http://www.ebay.com/itm/A-10-WARTHOG-ACES-II-EJECTION-SEAT-AIRCREW-PARACHUTE-EXCELLENT-CONDITION-/150698371506?pt=LH_DefaultDomain_0&hash=item231652a9b2 Edited November 20, 2011 by hog_driver111th 1 A-10C - FC3 - CA - L-39 - UH1 - P-51 - Hawk - BS2 - F-86 - Gazelle - F-5E - AV8B - F/A-18C i5-4590 - GTX 1060 - Oculus CV1 - TM:Warthog [sIGPIC]http://forums.eagle.ru/signaturepics/sigpic9979_1.gif[/sIGPIC] Link to comment Share on other sites More sharing options...
Deadman Posted November 21, 2011 Share Posted November 21, 2011 Just an FYI parts will be getting more expensive it looks. One thing you will see is that you will be in direct completion for some part with F-16 builders, and they tend to spend much more than you will and the scarcity of real parts well some things are a bit pricey. Even though the ACES II was for an A-10 there were at lease two F-16 builders bidding on it. Normal prices in the past for the same seat were under $2000.00 https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Deadman Posted November 22, 2011 Share Posted November 22, 2011 (edited) A bit pricey F-18 I think http://www.ebay.com/itm/Simulator-Seat-/230704040513?pt=LH_DefaultDomain_0&hash=item35b7084a41 This is way over priced KLaFaille got his for much less ARU 2B http://forums.eagle.ru/showpost.php?p=1286646&postcount=193 http://www.ebay.com/itm/Malwin-Flight-Simulator-ADI-ARU-2B-/230705211933?pt=Motors_Aviation_Parts_Gear&vxp=mtr&hash=item35b71a2a1d AAU9A way over price for a broke instrument worth may be $10.00 in this condition. http://www.ebay.com/itm/Aircraft-Indicator-Vertical-Velocity-AAU-9-A-Broken-/140521678786?pt=Motors_Aviation_Parts_Gear&vxp=mtr&hash=item20b7bea7c2 Control Transponder set C-6280A(P) this was a good clean unit there worth $75 with the old edge lit panel as this one is if you can find one with NVIS Green back lit well then probably double that http://www.ebay.com/itm/CONTROL-TRANSPONDER-SET-C-6280A-P-APX-/120802496757?hash=item1c2063d0f5&item=120802496757&pt=Motors_Aviation_Parts_Gear&vxp=mtr Collins C-9603/A TACAN control Head a bit beat up for the price http://www.ebay.com/itm/120799135827?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 Accelerometer this looks the same as in the A-10C and a great price http://www.ebay.com/itm/Helicopter-Accelerometer-Indicator-/140646394704?pt=Motors_Aviation_Parts_Gear&vxp=mtr&hash=item20bf2dab50 Landing light switches http://www.ebay.com/itm/Boeing-B-727-737-Landing-Light-Switches-quick-on-Bar-/230705315285?pt=Motors_Aviation_Parts_Gear&vxp=mtr&hash=item35b71bbdd5 Edited November 22, 2011 by Deadman https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Deadman Posted November 23, 2011 Share Posted November 23, 2011 (edited) Well its the third time I have seen this on eBay it is really to bad it was gutted out. I would have bought it just to much to ship to where i live. May be some one else lives down closer to it good luck http://www.ebay.com/itm/A-10-Warthog-Cockpit-Trainer-Simulator-Air-Force-NR-/220899390684?pt=LH_DefaultDomain_0&hash=item336ea134dc Edited November 23, 2011 by Deadman https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Krebs20 Posted November 26, 2011 Share Posted November 26, 2011 Someone printed a full color manual. $80 is cheap. http://www.ebay.com/itm/DCS-A-10C-Warthog-663-page-flight-manual-full-color-/320797770490?pt=Video_Games_Games&hash=item4ab10982fa [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
cichlidfan Posted November 26, 2011 Share Posted November 26, 2011 I have one of those too, only I have never printed the first 80 or so pages but if it is only 663 pages it is out of date and full of errors. Now if it was current and printed with a laser printer on 28# paper, then maybe. ASUS ROG Maximus VIII Hero, i7-6700K, Noctua NH-D14 Cooler, Crucial 32GB DDR4 2133, Samsung 950 Pro NVMe 256GB, Samsung EVO 250GB & 500GB SSD, 2TB Caviar Black, Zotac GTX 1080 AMP! Extreme 8GB, Corsair HX1000i, Phillips BDM4065UC 40" 4k monitor, VX2258 TouchScreen, TIR 5 w/ProClip, TM Warthog, VKB Gladiator Pro, Saitek X56, et. al., MFG Crosswind Pedals #1199, VolairSim Pit, Rift CV1 :thumbup: Link to comment Share on other sites More sharing options...
Deadman Posted November 27, 2011 Share Posted November 27, 2011 ok back to parts This is a bit over priced no diffrence in these pads between F-16,F-15 and A-10 AFAIK http://www.ebay.com/itm/A-10-ACES-II-Ejection-Seat-Back-Pad-/150707542192?pt=LH_DefaultDomain_0&hash=item2316de98b0 https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Deadman Posted November 27, 2011 Share Posted November 27, 2011 Parachute container at a bargain price at this time. http://www.ebay.com/itm/F-16-Aces-II-Ejection-Seat-Drogue-Parachute-Container-Drogue-Chute-/180763917785?pt=LH_DefaultDomain_0&hash=item2a165e7dd9 https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Deadman Posted December 5, 2011 Share Posted December 5, 2011 oxygen control panel http://www.ebay.com/itm/Clifton-Precison-Aircraft-Oxygen-Regulator-PN-29270-10A-A1-/230712700498?pt=Motors_Aviation_Parts_Gear&vxp=mtr&hash=item35b78c6e52 https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
avlolga Posted December 5, 2011 Share Posted December 5, 2011 Hi Deadman, regarding to Collins C-9603/A TACAN control Head a bit beat up for the price http://www.ebay.com/itm/120799135827...84.m1423.l2649 i have visit in his hangar, and i can get some of those parts in responsible price (50-70$) most of his parts are from F-4 or skyhawk. i got from there my RWR and my F-4 seat. there are few (need to be clean a bit) ADI and HSI VVI Altmeter, is it just for collection or it is possible to connect them to the Game via external interface or how? there are many parts not yet published. Avi Link to comment Share on other sites More sharing options...
Deadman Posted December 6, 2011 Share Posted December 6, 2011 You can connect them to an IO card and connect them to a computer and run them with the simulator. I would suggest you get Mike Powel's books http://www.mikesflightdeck.com/mfdb/mfdb.html You can check out Mike's http://forums.eagle.ru/showpost.php?p=1344540&postcount=2 http://www.mycockpit.org/forums/content.php/362-Fighter-Plane-MIP-Design-and-Layout What parts are you looking for? https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
avlolga Posted December 6, 2011 Share Posted December 6, 2011 Thanks , already got one of Miki's book , now ordered the sec. Link to comment Share on other sites More sharing options...
Deadman Posted December 11, 2011 Share Posted December 11, 2011 http://www.ebay.com/itm/AIRCRAFT-COCKPIT-FLOODLIGHT-/390372561749?pt=Motors_Aviation_Parts_Gear&vxp=mtr&hash=item5ae4049355 http://www.ebay.com/itm/AIRCRAFT-ELECTRICAL-TACHOMETER-P-N-8DJ81-/390370050845?pt=Motors_Aviation_Parts_Gear&vxp=mtr&hash=item5ae3de431d https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Deadman Posted December 15, 2011 Share Posted December 15, 2011 http://www.ebay.com/itm/180774871698?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 http://www.ebay.com/itm/Cutler-Hammer-Mil-Spec-MS25307-262-Toggle-Switches-16each-/380393878853?pt=LH_DefaultDomain_0&hash=item58913df545 http://www.ebay.com/itm/Cutler-Hammer-Mil-Spec-MS25307-222-Toggle-Switches-20each-/380393878662?pt=LH_DefaultDomain_0&hash=item58913df486 https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
hog_driver111th Posted December 15, 2011 Author Share Posted December 15, 2011 Nice listings DM. I just wish I were still stateside. Customs here in Germany are hell! A-10C - FC3 - CA - L-39 - UH1 - P-51 - Hawk - BS2 - F-86 - Gazelle - F-5E - AV8B - F/A-18C i5-4590 - GTX 1060 - Oculus CV1 - TM:Warthog [sIGPIC]http://forums.eagle.ru/signaturepics/sigpic9979_1.gif[/sIGPIC] Link to comment Share on other sites More sharing options...
Deadman Posted December 15, 2011 Share Posted December 15, 2011 you need to get a job with the USG like TSA or some thing that hooks you up with APO privileges https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
hog_driver111th Posted December 16, 2011 Author Share Posted December 16, 2011 UHF Radio, incase someone wants the real deal like in the jet. Caution, not cheap! hehe http://www.ebay.com/itm/MILITARY-AIRCRAFT-RADIO-RT-1610-URC-126-MAGNAVOX-UHF-/270751484363?pt=LH_DefaultDomain_0&hash=item3f0a0bc9cb A-10C - FC3 - CA - L-39 - UH1 - P-51 - Hawk - BS2 - F-86 - Gazelle - F-5E - AV8B - F/A-18C i5-4590 - GTX 1060 - Oculus CV1 - TM:Warthog [sIGPIC]http://forums.eagle.ru/signaturepics/sigpic9979_1.gif[/sIGPIC] Link to comment Share on other sites More sharing options...
hog_driver111th Posted December 16, 2011 Author Share Posted December 16, 2011 you need to get a job with the USG like TSA or some thing that hooks you up with APO privileges I have a military buddy not too far from me that has an APO.. Think I could get stuff shipped to him and have him send them to me without busting customs? A-10C - FC3 - CA - L-39 - UH1 - P-51 - Hawk - BS2 - F-86 - Gazelle - F-5E - AV8B - F/A-18C i5-4590 - GTX 1060 - Oculus CV1 - TM:Warthog [sIGPIC]http://forums.eagle.ru/signaturepics/sigpic9979_1.gif[/sIGPIC] Link to comment Share on other sites More sharing options...
Deadman Posted December 18, 2011 Share Posted December 18, 2011 Its up to him if he wants to break regs or not. Its a violation of APO privileges to send or receive post for non military or contractors. https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Deadman Posted December 18, 2011 Share Posted December 18, 2011 Here is a link to an AN/ARC 164 digital control head . http://verkopers.marktplaats.nl/13696562 and some other item for sale on a Dutch site parts are listed for the F-16 so they are very expensive the Altimeter looks to be an AAU-19A and not the AAU 34/A that is in the A-10 C :thumbup: https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Deadman Posted December 18, 2011 Share Posted December 18, 2011 These would work well on a TISL panel http://www.ebay.com/itm/Unused-Lot-Korry-Aircraft-Cockpit-Indicator-Light-14944-001-/230718208387?hash=item35b7e07983&item=230718208387&pt=Motors_Aviation_Parts_Gear&vxp=mtr https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Deadman Posted December 18, 2011 Share Posted December 18, 2011 This is a nice addition to an ACES II http://www.ebay.com/itm/120828446089?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Deadman Posted December 18, 2011 Share Posted December 18, 2011 looks to be and ARU-2B/A But the price is WOW http://www.ebay.com/itm/ADI-additude-Directional-indicator-Simulator-F-4-F-16-/150718292007?pt=LH_DefaultDomain_0&hash=item231782a027 https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Deadman Posted December 22, 2011 Share Posted December 22, 2011 http://www.ebay.com/itm/F16-Flighting-Falcon-Aircraft-Dutch-F-16-Aircraft-Altimeter-Damaged-/130620232291?pt=UK_CPV_Aviation_SM&hash=item1e69929263 https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Deadman Posted December 22, 2011 Share Posted December 22, 2011 Some one in the UK please purchase this and rebuild it this needs to be saved and be sides it is so fricken cool :geek: http://www.ebay.com/itm/RAF-Panavia-Tornado-ADV-Fighter-Aircraft-Cockpit-Section-Ideal-Simulator-Project-/130619898695?pt=UK_CPV_Aviation_SM&hash=item1e698d7b47 https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Recommended Posts