JCook Posted August 2, 2012 Posted August 2, 2012 I'm not sure of the front panel's dimensions in the A10C - Would a LCD monitor 23" wide x 14" high placed behind the A10C's front panel be of sufficient size to display the two MFDs, the center AI and HSI and lower gauges on the left, engine gauges and fuel? This would be behind the panel cutouts - I'm not describing an 'all glass' panel.
linden Posted August 2, 2012 Posted August 2, 2012 I have made a test whit one 27" and 2 7" lcd, this is a blueprint havent tested it in real life, but mabe it can help you. Let me know if you need the .dxf file. /David
JG14_Smil Posted August 2, 2012 Posted August 2, 2012 Hello, best of luck with your build JCook. Does anyone know what adding those two 7" monitors does to framerates? I have a similar 27" #2 monitor and need the extra display room for BS2 gauges.
JCook Posted August 3, 2012 Author Posted August 3, 2012 Thanks for the input. Using a single monitor behind the front panel looks promising.
Waxi Posted August 3, 2012 Posted August 3, 2012 Note that a 27" screen will be a bit too small to fully cover real-sized MFCDs. So in case you want to have MFCDs that are as big as the real ones, then you probably have to use a 30" screen. However, if you are planning to use the Thrustmaster MFCD frames and buttons, which are smaller than the real A-10C ones, then a 27'' screen is sufficient.
Recommended Posts