flyingscotsman Posted May 18, 2013 Posted May 18, 2013 I have had this from the start in that with the rotors running on the runway there is a bang after 10- seconds and the blades fly off. End of flight I used to be able to fly again,and it would just work fine. Now it happens every time, or the runway from the parking lot with rotors running However it's ok to be at 'Turning point' just a bit hairy and you can cold start from the ramp I think the answer is to cut the power on the collective, because the same happened when I held the start button too long and the blades came off then Can we have fix that brings down the power....if I'm right Thank you:smilewink:
joey45 Posted May 18, 2013 Posted May 18, 2013 Check that your Collective is set right before you click fly. The only way to make sense out of change is to plunge into it, move with it, and join the dance. "Me, the 13th Duke of Wybourne, here on the ED forums at 3 'o' clock in the morning, with my reputation. Are they mad.." https://ko-fi.com/joey45
flyingscotsman Posted May 19, 2013 Author Posted May 19, 2013 Thank you Joey45, Collective at lowest setting, I have a button assigned to the power but can't get it 'down' fast enough before the blades come off, will fiddle some more Since my last post I have deleted my current version, brought my backup copy accross and it still did it So I did a re-install off the website and still the same. I can be flying or start from cold, it works but rotors running - 10 seconds now - bang no blades Will try your suggestion this evening when I get back from work thank you
Devrim Posted May 19, 2013 Posted May 19, 2013 Don't you forget the GOV switch to AUTO, do you? Intel i7-14700@5.6GHz | MSI RTX4080 SuperSuprimX | Corsair V. 64GB@6400MHz. | Samsung 1TB 990 PRO SSD (Win10Homex64) Samsung G5 32" + Samsung 18" + 2x8"TFT Displays | TM Warthog Stick w/AVA Base | VPC MongoosT-50CM3 Throttle | TM MFD Cougars | Logitech G13, G230, G510, PZ55 & Farming Sim Panel | TIR5 & M.Quest3 VR >>MY MODS<< | Discord: Devrim#1068
Rangi Posted May 19, 2013 Posted May 19, 2013 Have you tried resetting your key assignments to default? PC: 6600K @ 4.5 GHz, 12GB RAM, GTX 970, 32" 2K monitor.
joey45 Posted May 19, 2013 Posted May 19, 2013 Just done a check and no probs here... Have your throttle down before you click start. Clear all keys that are linked to flying.. ie collective and cyclic. The only way to make sense out of change is to plunge into it, move with it, and join the dance. "Me, the 13th Duke of Wybourne, here on the ED forums at 3 'o' clock in the morning, with my reputation. Are they mad.." https://ko-fi.com/joey45
flyingscotsman Posted May 19, 2013 Author Posted May 19, 2013 To Joey45, Devrim & Rangi, RESULT! Thank you Re the auto, no time to check switches, recall the rotors are already running and it took about 10 seconds to bang - no rotors Yes I set the switches to default, but then realised that my CDU's too count as buttons/axes, move the slider to the right on the options page,and sure enough there were buttons assigned to the axes, including collective and power. Deleted these and put the helo on the tarmac, solid thud thud thud of rotors turning....yeeehaaa Thank you gentlemen for your assistance Flyingscotsman
Recommended Posts