rabidscoobie Posted May 26, 2017 Posted May 26, 2017 Using this one! It's great, https://github.com/AntiMicro/antimicro have a look. Ok this looks nice. But it's not seeing all my controllers. It see my Combatstick,Rudder pedals, and a vjoy. It does not load my Ch throttle. Any ideas? It does look like what Im looking for though. Simple,easy and does the job.
ice_pdb Posted May 27, 2017 Posted May 27, 2017 I have no problem with my devices...I tested 4 at the same time. 2 MMJOY2, 1 PIC joystick with 64 buttons, and an old game-pad with 12 buttons and 4 axis, all of them are read correctly. (did you try running the app as Admin checked on the compatibility options)
rabidscoobie Posted May 27, 2017 Posted May 27, 2017 I have no problem with my devices...I tested 4 at the same time. 2 MMJOY2, 1 PIC joystick with 64 buttons, and an old game-pad with 12 buttons and 4 axis, all of them are read correctly. (did you try running the app as Admin checked on the compatibility options) My HOTAS is MMJOY2 controllers. It sees the stick and my TM rudder pedals but does not see the throttle. Tried running as admin,pc restart after install, plugging and unplugging USB. I really dont know what else to do.Sort of look with google search but not much came up,will be looking at it some more. Another question of buttons and switches though. I was messing with a toggle switch and I cant really seem to figure out how to make them work in games. If I switch off,its off-no button press. If I switch on,its on- always registers as a button press. I'm sure it can be done but I cant seem to find anything in a google search to figure out of to make it register just as a single button press.
ice_pdb Posted May 27, 2017 Posted May 27, 2017 I use Build 20160818 About buttons I use Button(norm). (Normal behavior) Switch: when I press button it commands a press / unpress at same time. When I release it it do the same. VKB Button Tester example. PRESSED Btn #5 pressed PRESSED Btn #5 unpressed RELEASED Btn #5 pressed RELEASED Btn #5 unpressed Btn #5 pressed Switch ON: When pressed it commands a pressed/unpressed. No change after release (no more commands. Switch OFF: When it's pressed it do nothing. When release it commands pressed/unpressed. Soft Switch: Pressed once it maintain press command until button is pressed again.
Sokol1_br Posted May 27, 2017 Author Posted May 27, 2017 My HOTAS is MMJOY2 controllers. You are using different VID/PID and device name in yours MMjoy2?
rabidscoobie Posted May 27, 2017 Posted May 27, 2017 (edited) You are using different VID/PID and device name in yours MMjoy2? Thanks ICE. I'll give that a look I know its just a setting in MMJoy,I'm still learning to use it. Sokol, Yes I changed the name and ID's of each device. In DCS,IL-2 and Star Citizen they show as separate devices. But in Antimicro it will always shows my stick and rudder pedals, it never shows my throttle. Ive tried plugging into different USB's,only plugging in throttle etc... But it never shows. I even plugged in only throttle and gave it same ID's as stick,didnt change name though and it still wouldnt show in antimicro. Now some of the other programs I used it shows in them just not Anti. Cant figure that one out. I dont know it this matters or not. But in "Device and Printers" the stick shows as keyboard device with the name I gave the stick. The throttle shows as a Gaming Controller with the name I gave it. But then my pedals show as a gaming device also. Edited May 27, 2017 by rabidscoobie
rabidscoobie Posted May 27, 2017 Posted May 27, 2017 (edited) I use Build 20160818 About buttons I use Button(norm). (Normal behavior) Switch: when I press button it commands a press / unpress at same time. When I release it it do the same. VKB Button Tester example. PRESSED Btn #5 pressed PRESSED Btn #5 unpressed RELEASED Btn #5 pressed RELEASED Btn #5 unpressed Btn #5 pressed Switch ON: When pressed it commands a pressed/unpressed. No change after release (no more commands. Switch OFF: When it's pressed it do nothing. When release it commands pressed/unpressed. Soft Switch: Pressed once it maintain press command until button is pressed again. Where do I get the build your using? I have build 20151118, cant seem to find any others. EDIT: Nevermind I found it. Was kind difficult finding it since I dont read russian. But says it doesnt support my firmware version. Edited May 27, 2017 by rabidscoobie
Sokol1_br Posted May 27, 2017 Author Posted May 27, 2017 What advantage of this Antimicro relative do Xpader, Joy2Key... by this video seems me that do the same thing.
rabidscoobie Posted May 27, 2017 Posted May 27, 2017 (edited) Got the switch working. I forgot about checking the show log box...doh Tried your version of MMjoy but Amtimicro still not seeing the throttle. Edited May 27, 2017 by rabidscoobie
ice_pdb Posted May 27, 2017 Posted May 27, 2017 Where do I get the build your using? I have build 20151118, cant seem to find any others. EDIT: Nevermind I found it. Was kind difficult finding it since I dont read russian. But says it doesnt support my firmware version. https://translate.google.com/translate?sl=ru&tl=en&js=y&prev=_t&hl=en&ie=UTF-8&u=https%3A%2F%2Fsites.google.com%2Fsite%2Fmmjoyproject%2Ffajly-dla-skacivania&edit-text=
rabidscoobie Posted May 28, 2017 Posted May 28, 2017 https://translate.google.com/translate?sl=ru&tl=en&js=y&prev=_t&hl=en&ie=UTF-8&u=https%3A%2F%2Fsites.google.com%2Fsite%2Fmmjoyproject%2Ffajly-dla-skacivania&edit-text= Thanks I didnt even know that could be done. Only I knew was to copy paste into a translator.
rabidscoobie Posted May 31, 2017 Posted May 31, 2017 https://translate.google.com/translate?sl=ru&tl=en&js=y&prev=_t&hl=en&ie=UTF-8&u=https%3A%2F%2Fsites.google.com%2Fsite%2Fmmjoyproject%2Ffajly-dla-skacivania&edit-text= Quick simple question. In the old version MJOY I was using I could bind a joystick button to a keyboard command. EX: Button 5 to Scroll Lock This version that you are using doesnt seem to have that feature anymore. I liked that setup because I use Scroll Lock as my Push To Talk with TeamSpeak key in all games. Normally in games where Im not controlling pedals I use a USB foot switch that I use as PTT so my hands are free. But in sims I use either Rudder or racing pedals(Assetto Corsa and such).
Sokol1_br Posted June 1, 2017 Author Posted June 1, 2017 (edited) Keyboard/mouse emulation was removed from last versions of firmware - I guess for free memory to allow implement LED support for... War Thunder. :music_whistling: "MMJOY2 [v20160818 BETA] 1) removed emulation keyboard and mouse, done to reduce the load on the processor and speed up the firmware. " BTW - TS don't support DX (joystick) buttons? Edited June 1, 2017 by Sokol1_br
rabidscoobie Posted June 1, 2017 Posted June 1, 2017 Keyboard/mouse emulation was removed from last versions of firmware - I guess for free memory to allow implement LED support... for War Thunder. :music_whistling: Yeah not a fan either. I sort of looked at the LED stuff in Mjoy, but I really didnt know what it was for.
ice_pdb Posted June 1, 2017 Posted June 1, 2017 Quick simple question. In the old version MJOY I was using I could bind a joystick button to a keyboard command. EX: Button 5 to Scroll Lock This version that you are using doesnt seem to have that feature anymore. I liked that setup because I use Scroll Lock as my Push To Talk with TeamSpeak key in all games. Normally in games where Im not controlling pedals I use a USB foot switch that I use as PTT so my hands are free. But in sims I use either Rudder or racing pedals(Assetto Corsa and such). I use Antimicro for that... actually the 2 step trigger of my FLCS first step I make it transmit TS2, and second step transmit through TS3 (different keys).
rabidscoobie Posted June 1, 2017 Posted June 1, 2017 I use Antimicro for that... actually the 2 step trigger of my FLCS first step I make it transmit TS2, and second step transmit through TS3 (different keys). Well I still can not get Antimicro to see all 3, only will show my pedals and stick,no throttle. Guess I'll either have to play with it even more to get AM to work or find something similar thats not a pain to use. Thanks for the reply.
rabidscoobie Posted June 1, 2017 Posted June 1, 2017 Well I just tried something with Antimicro. It will see my stick,pedals and my G13. Just refuses to see the throttle. Ive set it up very similar to the stick in MJOY. Named it,used PID and such but nothing. Something I just thought of on Anitmicro. 1. Is there a certain number range the PID and such have to be in? 2.Does the character length of the MJOY device have to within a certain amount? Really cant think of much else.
ice_pdb Posted June 4, 2017 Posted June 4, 2017 Did you change poll?... and/or newer version firmware?
rabidscoobie Posted June 4, 2017 Posted June 4, 2017 Did you change poll?... and/or newer version firmware? To use the newer MJOY I had to update the firmware. But I did not change poll. I honestly dont know what that does and in the first post of this thread I used the Github link that talked about all the settings but didnt see a description about changing poll. So should I just change it to any number? I assume differently that the other MJOY Sticks. Again these are my first time ever dealing with anything like the Pro Micro.
ice_pdb Posted June 4, 2017 Posted June 4, 2017 (edited) try "-" in poll options when you save to the device. Just to check, can you see all the devices in windows joystick thing? %5Bimg%5Dhttp%3A//i.imgur.com/SdepyQD.jpg[/img] Edited June 4, 2017 by ice_pdb
rabidscoobie Posted June 4, 2017 Posted June 4, 2017 try "-" in poll options when you save to the device. Just to check, can you see all the devices in windows joystick thing? Yes they show up in Windows and most other programs similar to Antimicro, just not the ones I want to try and use. I just changed the poll and it worked!:thumbup: Antimicro now sees all the MJOY devices. Before I changed they would work fine in the games I tried them in, DCS,CLoD, and Star Citizen. Thanks for helping.
ShagrathBG Posted July 20, 2017 Posted July 20, 2017 Hello, I have a semi working button box and am trying to bind 2 encoders to the ABRIS Axis and Brightness rotaries in DCS Ka-50. However a single impulse of the encoder turns the rotary more or less it's full range. I thought 50ms, which is the encoder timer I used in MMJoy, is too long, but manually typing a timer value doesn't seem to work. I couldn't find anything interesting in the DCS lua files either (that doesn't mean it isn't there though, more likely i don't know what i should be looking for). My second question is, i have 2 potentiometers, that i want to bind to fine slew the shkval in Ka-50, but DCS only has options for absolute slew. Is there a way to achieve what i'm trying or am i better off putting 2 more encoders and binding them to the digital slew bindings?
ice_pdb Posted July 21, 2017 Posted July 21, 2017 Hello, I have a semi working button box and am trying to bind 2 encoders to the ABRIS Axis and Brightness rotaries in DCS Ka-50. However a single impulse of the encoder turns the rotary more or less it's full range. I thought 50ms, which is the encoder timer I used in MMJoy, is too long, but manually typing a timer value doesn't seem to work. I couldn't find anything interesting in the DCS lua files either (that doesn't mean it isn't there though, more likely i don't know what i should be looking for). My second question is, i have 2 potentiometers, that i want to bind to fine slew the shkval in Ka-50, but DCS only has options for absolute slew. Is there a way to achieve what i'm trying or am i better off putting 2 more encoders and binding them to the digital slew bindings? I really don't use DCS so I couldn't tell. Can you be more specific? and not talking about simulator, it's better to explain what you want the axis to do, for instance, what you do you mean by absolute slew?. (English isn't my language :) )
THeCeltic Posted July 22, 2017 Posted July 22, 2017 Hello, My second question is, i have 2 potentiometers, that i want to bind to fine slew the shkval in Ka-50, but DCS only has options for absolute slew. Is there a way to achieve what i'm trying or am i better off putting 2 more encoders and binding them to the digital slew bindings? I think the best way to archive what you want is to use buttons in a cross pattern. Or find a digital POV hat.
Recommended Posts