VirusAM
-
Posts
3312 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by VirusAM
-
-
I saw the shipping mail on Sunday... awesome man.... thanks...Very glad it's working well for you Pman!! And thanks so much for the link on FB
Just a quick teaser pic on progress on my thumbstick kits. Most pre-orders should be shipping out this week.
I for sure will seek your help for installing it..i am not really a DIY guy
-
I don't think so... unfortunately only hotas warthog, cougar, mfds, t16000,t16000m, Throttle ans rudder pedals can be controlled by targetCan TARGET control the Thrustmaster gearshift lever? I had the idea of using it as a landing gear lever and if TARGET can control it, it would be possible to integrate it into your landing gear position logic that's used with the china hat switch. -
Thanks for your replyThe FPS issues are gone! -
I don't use Helios since two years...back then i had FPS issues because for exporting MFDs i had to use much more resolution then the real one....1 screen was 1080p and the touchscreen was 1600x900 but for exporting MFD i used only a minimal part of it..but dcs saw it as a full 1920x1980 screen....and if i recall correctly part of the fps issue was also due to the fact that was not possible to have the display in full screen...someone could kinldy tell me if this
is this now solved or there is a workaround?
Now i have a 32" 1440p screen and i plan to get a 20-23" 1080p touchscreen but before buying it i would like to know if these problems are solved...
Thanks
-
Buongiorno, qualcuno conosce la velocità di
Massima autonomia chilometrica
Massima autonomia oraria
del nostro hornet?
Online non si trova da nessuna parte il performance manual del "C"
Grazie
Non lo troverai da nessuna parte perché non è un aereo civile..ma dipende...dipende dal carico che hai oltre che dagli altri classici fattori...in ogni caso dovrebbe esserci una pagina negli MFD che ti fornisce in tempo reale l'altitudine e velocità di best endurance...simile a quella presente sull'F16
-
Grazie! Seguendo questa guida nella configurazione del Joystick, non comprendo la funzionalità di 2 tasti.
ATC Engage / Disengage
Throttle Finger Lift (BOTH)
Mi da una spiegazione a ciò?
Grazie
ATC Engage
serve ad impostare una velocità che poi l'FCS mantiene automaticamente...in pratica arrivi alla velocità che ti interessa, schiacci il tasto e l'autopilot lo mantiene...poi con il carrello giù invece serve a mantenere l'angolo di attacco impostato (non ancora implementato)
Throttle Finger Lift
In pratica è l'AB detent le manette arrivano a MIL Power e si bloccano tirando su il finger lift si può andare in full AB...personalmente mi sembra che solo in decollo da portaerei accada ciò
-
the ssd should not be defragmented
-
For who uses warthog+mfd...i have done a version of the 128 buttons script for it...
Here is the script...the tmh and the lua for dcs world
it is not finished yet...but feel free to use and modify
-
Apparently the start up procedure is compete
-
Yes there is a whole thread on the Hornet stick with pictures trom Wags himselfWait, did anyone else catch that? Wags said his TM hornet stick! You are a very lucky man. When will we be able to get one??Thanks Wags.
-
Do you have teamspeak opened?
When i have teamspeak opened before target script launched i have the same issue (but i have warthog not cougar) ... anyway TARGET software have some issue with Windows 10 and sometimes that happens...you can anyway clear all assignments for cougar in the control menu in DCS and that should solve conflicts
-
You should be able to use homefries's profile also without mfd (I did that for mounths) you simply won't be able to hotswitch profiles and to use some advanced but very important featuresHi marcocom.Exactly, that’s what I thought, too. But the values have been properly set to 0 in CTS for the Warthog stick and throttle...
If the lack of MFDs is indeed the problem then I guess I just misunderstood the requirements and will be looking for another profile, for I don’t have any use of them in my VR headset :smilewink:
Thanks for your reply!
-
Can you link the topic please?
Sorry but i am on the phone and cannot find it at the moment
-
That 's not the way it works...you have just to use castle switch to make the ddi where you put the radar as display of interestSearch for "Throttle Designator Controller"THAT is the control for the slew, and you can map it to a hat switch.
NOTE: YOU MUST BE IN AA MODE.
if you are not in AA mode the cursor will not move.
-
I don't know of what you are talking....disable Sense Mi in bios (the referred temperature offset) and use SVI2 TFN voltage sensors within HWinfo 64.Cannot find anything similar to sense mi in my bios....my motherboard is msi x370 gaming plus....
Then i don't know what is svi2 tfn..can you give me a step to step guide?sorry...but i am not an overclocking or similar expert
Anyway i discovered that the temps reported in ryzen master are 10 degrees lower that the one reported in Afterburner...so when i am using dcs i have 66° reported from Afterburner and 56° by ryzen master...
So the difference between 2700x and previous 1700x is just 5-8 degrees
-
Razbam should do like the ED is doing with the Hornet...coding base systems for doing a well done training (so avionics, ins etc) and then combat systems later...so us could do a coherent training and not unlearn what is learned...
Hope they will consider this for future modules...and it is not criticism (in fact i love both Mirage and Av8b) but just an advice
-
So i have hotas warthog and the mfds...I don't understand the question. You can map all of the DX buttons to any button in the script. You can make a single trigger press push 120 buttons if you want to.I tought that this hack assigned automatically dx 1-19 to joystick 20-52 to throttle and so on....
So just to make clear to me...using it i can assign for example dx 60 to an mfd button and dcs will see it?
I am asking because as far as i know dx devices can have 32 buttons + a pov hat at maximi...
Thanks
-
In realtà l'hornet è ancora in servizio sia con la marina che con i marines....
La marina lo ha ritirato 2 mesi fa dalla rotazione per i tour sulle portaerei ma è ancora in servizio da terra in un paio di squadrons...
Inoltre quelli che la marina sta dismettendo andranno a rinforzare le file dei marines in quanto i loro airframes sono in cattive condizioni...
-
Can someone explain step to step procedure for importing new theatres? I tried to follow the one in the manual but when i paste in the voice attack profile (don't remember the exact field but it is the one stated on the vaicom pro manual) i just have empty spaces.
It is for Hormuz obviously
-
You have to save a diff file for every device you got...then you have to load it for every device
-
I read temps from Ryzen Master and from Afterburner while in gameSome boards use artificial temperature offsets, not to mention that there are more than one temperature sensors and some apps are reading wrong, it's a mess. You need to research for your motherboard BIOS options too see if there is such offset, and what apps can read the correct values. I use hwinfo 64 and it reads 2 different te. PS for that cpu, you need to choose the correct o é and hide the other oneI cleaned cpu and cooler twice and reapplied thermal paste after having installed the new chip...so i am pretty sure it is ok
-
How this works?
1-32 atick
33-64 throttle
65-91 mfd1
92-118 mfd2
Correct?
Or i am missing something?
-
Ok in DCS with without OC i see 4000 usually max 4100.... outside sometimes i see 4200Base clock is still at 3.7ghz. 4.3ghz is just the boost frequency that you see in the description. I haven't done anything to the cpu in the bios; everything except the ram is set to "auto."I max out at 85 degrees Celsius with prime95 using the stock cooler, if that helps you as a reference point.
Which motherboard do you have?
Which sticks?
Thanks
My temps are 65/70 max....with 1700x i had 45/55
So probably it is normal and due to the 105w tdp of the new chip
-
Why you need fingerlift mapped?
I use ab and idle detent and all works good
DCS: F/A-18C Hornet by Eagle Dynamics
in Italian
Posted
Infatti ho detto dovrebbe...nell'f16 c'è sicuro calcolato in tempo reale, nell'hornet dovrebbe essere nella pagina FPAS del DDI ma non è ancora implementata.
Ovvio che ci sono le charts...ma credo che il manuale performance sia almeno NR