ECHO 12

When flipping the tail hook switch to "DN", the hook does not drop.

When switching JFS Start switch to either the Start 1, or Start 2 positions, the JFS intake and exhaust doors currently don't open. The JFS Intake and exhaust doors are located on the left aft under side of the F-16 Fuselage just aft of the left main landing gear door. These should both open simultaneously when the JFS Start switch is flipped to either the Start 1, or Start 2 position. Then closed when the JFS Start switch is set back to the "Off" position.

When the F-16 runs its FLCS Bit check, everything in the cockpit seems correct, but the animation of the Flight Controls is missing. Here is an example taken from a Crew Chief's point of view of the Bit Check operating during launch. It's an older block, so not very accurate to the Block 50 digital bit. FLCS Bit begins around 2:45 into the video and cuts out around 4:12, but it was pretty close to the end of the bit. Watch the Flight Controls (Including the leading edge flaps). These are not pilot inputs. This is the FLCS moving the controls during the BIT check.

The canopy latch system is not animated. When lowering the canopy, once it touches the cockpit frame, the curved latches then rotate around the canopy mounting points (This is the extra sound you hear after it's closed). Below are screenshots. There are multiple latches around the canopy. All of them should rotate around the canopy mounts to engage and lock the canopy down.