JAPman

If DCS Su-27 is installed, it will crash by the beginning of missions. Boys, the subject of politics and religion is forbidden.

We demand automatic targetting.

It is a tank of WWⅡ.

Thank you, it solved. I saw the inner circle and thought why this would have a short range.:D It seems that it is changeless at the interval of a re-attack even if AA or a MLRS unit's Ural-375 is not in the vicinity, or even if it supplies by being. Communication menu > Other > Target 1 to 3 _Smerch Trigger test.miz

Please let me post the shot of boast. When passing of a bridge becomes impossible by bombarding, it is going to bypass and becomes like this.

Is it quick that someone uploads a mission to which Smerch works? In CA's single mission, Although Smerch appears, there is not AWACS. To killing time, Although it is in passing, it is an example of a small bug. SOCHI 2014.miz If the trigger of MISSION GOALS is not erased, the abnormal end of this mission will be done. Mission may not start depending on the case. This bug occurs that the score to which two triggers of "MISSION SCORE HIGHER THEN" were set is the same. Probably, this is an old bug. There is one more. If all "Hold" of "ADVANCED TRIGGER" set as ground forces' SP is erased, a custom-made formation will not be recorded on a missions file (mission).

"GROUP STOP" and "GROUP AI ON/OFF" trigger stopped functioning at "MISSION START". Doesn't behavior of old missions change?

If time is accelerated by F10map, icons will not move by more than A06. It is inconvenient to the check of missions of operation. Unless it cuts SaiDirectPutput with Windows service, after an end of mission, cursor moves irregularly and does not stop at X52pro. Saitek_X52Pro_Flight_Controller_7_0_27_13_x64_Drivers.exe http://forums.eagle.ru/showthread.php?t=118111

example of red tank(modified 2014/01/08) I found more smart solution. - modified 2014/01/088) Monitor Setting GAME>MONITORS -> 1 Screen All .lua files DCS World\Mods\tech\CombinedArms\Cockpit FOV FOV is not changed. Generic View Port iinfo.lua dedicated_viewport = {XXX + YYY + ZZZ/2, ULY + SZY/2*aspect/3.2125, ZZZ/2, SZY/2*aspect/3.2125} XXX is Left Monitor width YYY is bezel width ZZZ is Center Monitor width My 3.2125 is fullspan-width/center-monitor-width 4112/1280=3.2125 info text iinfo_page.lua local text_y = (1.25 - 1.3333)/0.5 -- local text_y = (aspect - 1.3333)/0.5 -- if aspect > 2 then -- text_y = aspect * 0.5 + 0.2 -- end My 1.25 is Center Monitor's aspect Main Gun itankred.lua dedicated_viewport = {XXX+YYY, (SZY - SZY/3.2125)/2, ZZZ, SZY/3.2125} XXX is Left Monitor width YYY is bezel width ZZZ is Center Monitor width My 3.2125 is fullspan-width/center-monitor-width 4112/1280=3.2125 Machine Gun iAAA_center.lua dedicated_viewport = {XXX+YYY, (SZY - SZY/3.2125)/2, ZZZ, SZY/3.2125} XXX is Left Monitor width YYY is bezel width ZZZ is Center Monitor width My 3.2125 is fullspan-width/center-monitor-width 4112/1280=3.2125 ATGM imissileAT.lua dedicated_viewport = {XXX+YYY, (SZY - SZY/3.2125)/2, ZZZ, SZY/3.2125} XXX is Left Monitor width YYY is bezel width ZZZ is Center Monitor width My 3.2125 is fullspan-width/center-monitor-width 4112/1280=3.2125

biginner's test play I want to enable an on-load and off-road change by a list like a Mission Editor. AI in CMD map which sets up a root is dull, and a play becomes troublesome. SP-RU Battalion Advance - Dusheti.miz

In the case of T-90 A target lock can be used by Enter key. Bring near cross hairs by a target. A manual is somewhat unkind.

Thank you. Although I used macro, I did not learn such setting methods. Support was also referred to as use a detailed macro. I use an old driver (Saitek_X52 Pro_Flight_Controller_SD6_64.exe). The manual of SST is not updated. If it sets up with a new driver with the old method, unnecessary whiskers will occur in an input signal.:)

Report I mailed support. He checked the pointed-out behavior. Support said that it would take this problem to a development department, and correspondence would be considered.:)

bino view in customized narrow view port I compose Eyefinity using 3 square displays. And I make the following reference and make view port which displays character of overlay limit to a center screen. Triple-head/Multi-Monitor GUI and NVG Fix In this state, if binoculars are used by T-90, it is as follows. Aren't there any nice ideas?

For care, I downloaded the newest driver and tested it combining old SST. And operation different from old specification is caused. In an old driver, my X52pro works normal. The input device was out of condition when a new driver was used, I did the bug track.

OOPS!!!!!

I am using X52Pro at 64 bits of Windows7. It found that the newest driver - Pro_Flight_Controller_7_0_27_13_x64_Drivers.exe had a bug. Because it was not corrected about half a year, I reported. OLD Driver - Saitek_X52Pro_Flight_Controller_SD6_64.exe: Shit+A (Quantize=0) Shift ↓ A↓ A↑ Shift↑ NEW Driver - Pro_Flight_Controller_7_0_27_13_x64_Drivers.exe: Shift+A (Quantize=0) Shift ↓ A↓ Shift↑ A↑

BS2 quick start "attack insurgents.miz" bug If a wing man is ordered to perform a free attack, A.I. will attack a load block first of all, and will empty arms. It seems that a missions result trigger does not respond unless it destroys a load block first.:no_sad:

Although it is a taking-advantage report, ATO-P-1.1 of Georgian Oil War in which Su-30 appears falls. In ATO-P-1.2, because a support attack plane is Su-24, it does not fall, but if a unit is changed into Su-30, it will come to fall. I am sorry for poor English of software translation.

It is not set to ON unless it pushes about 3 times also in me. I like the feeling in which a cockpit vibrates. I want the entry turned ON by a default.

I use SoftTH for RADEON7970 and am playing on square 3 screen. If aero is cut, a center monitor's focus will shift and cursor will point at a desktop in 1/3 of left sections. So, I am making it keepComposition=1 by the config file. And, in a new dialog, it cannot end by the Q key of a keyboard, either.