Neqva

Rather sure it's been discussed before. But could you not consider to turn the replay system into an actual replay system instead of debug tool? I mean, yes, the track files could still exist as a debug tool as they are today. But please, please, please consider allowing a functional replay system that will allow you to fast forward/rewind etc. This will make it so much easier for people making DCS content to create awesome DCS videos which in turn is more or less free advertisement for DCS.

Hey! Lawyers enjoy flight sims as well! Just curious, but recently quite a few known youtubers have started showcasing the F15E again. Is there any hope of any progress currently beeing made that would allow for people to get their hopes up a little bit? Not asking if theres a resolution cooming straight away, but are we at least seeing something to gives us hopes that it will come to an agreement, at some point? Or are we still completely in the dark and the YouTubers are just showcasing a good looking module by coincident at the moment?

Yea, we have separate physical servers for each DCS server we are running. So only one installation folder and Saved Gamers folder for each server on each dedicated server and corresponding server hardware. The issue isn't that I'm unable to install any given terrain, but to UNINSTALL a terrain after its been installed once. One of the servers used to run KOLA, but we have changed servers and now the previous KOLA server is supposed to run an Afghanistan mission. However that is not possible as we can't currently update the server at all since the updater forces me to re-install KOLA as part of the update, leaving me with no more room to update the server or install Afghanistan. Im not even able to update because the server harddrive is full as long as the KOLA map is installed. So I am unable to even update the server before I've managed to delete something else, but if I delete any of the terrains that are installed, the updater will just try to install it as part of the next update.

Hey. Trying to spawn in a helicopter (Apache) at Bassel Al-Assad places you too close to a ramp, leaving your tail ontop of the ramp. I've also noticed that every time my pilot blacks out or dies in the Chinook, DCS crashes, first a freeze then Crash to desktop.

I am part of a discord community that has serveral dedicated servers running. We are running with dedicated terrain servers so one server is only running Syria, one is only running Kola and one is only running Afghanistan. However, we have issues getting the latest updated into the Afghanistan server as there is simply not enough disk space for the server to update. The server has all terrains installed and I want to uninstall some of them, however if I simply delete them the updater wants to install them again. How can I update a dedicated server WITHOUT having to install all terrains? Help please

I've noticed the same issue as well. SA-10, SA-15 and Patriot all eat HARMS missiles like theres no tomorrow. They never try to intercept the missiles anymore and even though the SA-15 can move, it never moves out of the way quick enough to survive, nor does it fire back at the HARMS. This needs to an option so that you can choose if you want them to shut down and run or try to intercept the missiles, and you should be able to choose it from the F10 menu like you do the RED/GREEN/AUTO or FIRE/HOLD menus. As it is now, the SA-10, SA-15 and Patriot is just useless against HARMS and I suspect its the same issue with the C-RAM as well.

Neqva but you'll find me ingame as "CHARIOT 189 | Wolfè". Some photos NOT post-polished to showcase some good fun with helicopters and as a Norwegian, some mandatory F16 photo from Kola (up in the clouds so you don't actually SEE Norway ^^)

Hi every. I am curious if its possible to change the number of letters or numbers are showing on the tail number for the Shark? For example I tend to fly with a 3 digit tail number but its only the last 2 that shows. I would like to change it so that all 3 numbers gets "painted" onto the aircraft. So forexample the tailnumber on the fuselage reads 123 instead of just 23 if I choose my tail number to be 123. Anyone knows if that possible?

I'm not sure you get the point of the post here. Not once did you reply to the case at hand, but instead you critize the OP for what you consider to be disrespecting other creaters. That's missing the point by a mile. You seem to have deleted the original post leading up to this thread, which is a shame tbh. However, I would just like to ask you one thing: Who made the Norwegian F16 Liveries used in the 2024 and beyond trailer? If your answer is someone else then the artist you chose over anyone else, I'd reconsider the previous decision and open up for other artists to participate and get some well deserved recognition for their work as well tbh.

Just as an input I believe should be noted here. I enjoy seeing all the livery contests that makes people strive to make some amazing liveries. Now, im norwegian and part of the largest DCS community of Norwegians in DCS, and lets just say that it did not go unnoticed when the 2024 and beyond trailer showcased F16s in Norwegian liveries. As such I was looking forward to seeing some great inputs for the Norwegian liveries, but (and I say this without critizing the artist that got chosen) I feel like ED missed out on an opportunity by cancelling the "contest" and just deciding to go for a specific artist from the start. Especially when the largest Norwegian DCS community uses the liveries of a different artist. Like I said, this is not a critism of the artist or artwork that was chosen, just a bit dissapointed by the choices to NOT make it a competition and allow users to vote. Would have been great to see all the different inputs as well as a great way to acknowledge the amazing work done by so many artists. I still look forward to the Norwegian Liveries beeing added though

After some testing today, it seems that fixed it. Unable hot plugging seems to fix it, or work ad a work around. I still consider it a bug if DCS looks at any device on my wifi and actually freeze if one of them gets turned off/on even if its not used/connected with DCS in any way. Thank for the help though! I really appreciate it!

Just to add to this: I experienced this same issue today in the BS3. When using the map mode in the ABRIS looking around with ERBL after a Flight plan was added and several TGT points, zooming in/out and moving around the cursor, would not move the map, but the symbology as well as scaling up/down the symbology as if the map was zoomed in and out. However the map didn't actually move or zoom. Not sure what triggered this, but as stated by Mando, taking a screenshot instantly "forced" the ABRIS to update.

Updated original post with possible cause. See EDIT info.

Hi all. I've got no idea what else to try at the moment so writing here in the hopes of someone able to read the logs to see what triggers it. My symptoms are DCS keeps freezing both in VR and 2D. When it freezes I can still hear the background sounds but DCS is "not responding" if I wait it out it will sometimes unfreeze after anything from 10 seconds to 2 minutes and maybe more, but if it goes more than 2 minutes I usually quit and restart. Ive tried quite a few things so far: several repairs Clean Clean re-install and without any mods installed Tried changing /turning off every DCS setting one by one to see if its related to anything there. Still no clue what might cause the issue. I don't understand the log files as the errors it shows doesn't tell me anything. Ive attached the latest log here, this log should have 3 freezes in it. I'm starting to think its related to either audio bug or a device loosing its connection but not sure. Anyone got any ideas? EDIT: I might have figured out the cause. I have a TV that sits in a different floor than my computer but is connected to my Wifi. When the TV is turned off, my DCS log gives me this message: INFO APP (Main): Device unplugged: [SWD] [TV] Samsung 7 Series (50). and DCS freezes. When my TV turns on, the DCS log gives me this message: INFO APP (Main): Device plugged: [SWD] [TV] Samsung 7 Series (50) How this is causing DCS to freeze is beyond my understanding, but when testing, it turned out that everytime I turn my TV ON or OFF DCS crashes. The only connection between my TV and my computer is by Wifi, nothing else. Can DCS be scanning for deviced connected by wifi due to wifi connected MFDS etc? and if so, can i somehow turn it off to DCS doesn't crash whenever my TV is turned on or off? If I ask my GF not to turn ON/OFF the TV while I fly, i fear it would have the opposite effect on her and the TV would go on and off every 10 minutes Attached another log from today where the TV was turned on, DCS froze and while frozen I turned the TV OFF again. It seems to be trying to rezie window when TV was turned on. THIS dcs.log is from today. THISdcs.log is the log I attached with the original post. Anyone help please?