_Guill4ume_

Hello, I am trying to use the WCMD and the JSOW in PRE mode and I don't see any AZL ( azimuth steering line ) displayed. According to the manual it should be . I have a valid target/ coordinate . If I pickle ( and within range ) the wpn is still released and hit the target. What could I be missing ?

Done Thank you!

By doing that is there a risk of surge or something which might damage my computer? Edit : It seems it was the root cause, I did that to the SS10 usb slot of my Varjo Aero and didn't get any crash on 2 SP game. I will try MP tomorrow, but so far it seems working I really thanks all involved for the help!!!

Ok Wilco, I did reinstalled the VR software, and I will also reinstall latest GPU drivers. Edit : DISM didn't worked out, sfc scan has been done Edit II : I bought my gaming computer done by someone else, while looking at the default clock speed and current clock speed I see a discrepency, does it means it's overclocked? ( since you asked )

Special K, I did a run with only keyboard and mouse ( Joystick/ Throttle/Rudder/ 2 mfd/ Ded/ ICP / right console/ left console all OFF ) VR on. All those are on 2 powered hub, set on a different socket than my computer and those hub are connected to my computer via an USB powered cable. It didn't crash. Both SP and MP, same settings as the 2 previous crashes. But now what? I can't play without controller what can I do and why it's crashing now and not before? Then one of them is mixing up with Varjo? What would you suggest, testing one by one? Or might be power related?

Ok noted. I will do it, just using mouse and keyboard. @SkateZilla Thank you for your input, but what I have to do then? The VB version hasn't changed nor the headset firmware since the starts of all those crashes and I haven't touched the settings ( which anyway doesn't change about the rate of crashes, if I use high , medium or even low for the headset and medium, low for the textures and terrain game settings ) cheers

aaannnddd .... crash again. SP instant action f16c ps : out of thread but why it s showing dcs open beta and not dcs? is it not common now? dcs.log-20240814-131512.zip

I am gonna remove openxr tool kit and quad view, as it was disabled and still the game crashed, so you can have a look. Note as well that my headset is up to date and the Varjo Base program is the last built

OK, it was disabled for those 2 games ( App not launched and when checked the box disable openXR toolkit is ticked). Also I installed that last week, so I had crashes before. Do you want me to disinstalled Openxrtoolkit/ quadview from my computer and try again? No no neck safer and yes I have tried those quad view to see if it can solve the problem.

done, it tok some time, all mode removed, changed the name and had a clean saved file; de log re log. long clean repair. crash again here are the log. 2 games one mp the other is instant action fre flight sp dcs.log-20240814-122819.zip dcs.log-20240814-123914.zip

Hello, thank you for your reply, i deleted al the mods, in the process of a slow repair i did 2 quick game : tried to use preload radius at zero and medium and low settings. both crash for those 2 errors it s with my external ded. i tried it with on and off. those 2 crashes here are with it off. no nothing is overclocked and temp are ok dcs.log-20240814-114416.zip dcs.log-20240814-115046.zip

Hi Community, @Flappie @BIGNEWY@silverdevil Getting in touch with you guys for the following problem ; ---> As said in the title 68 game crashes since updated from DCS 2.9.5.55918 . Happened in the 3 last update ' Unfortunately DCS Crashed, Allow dcs blablabl ' and when it happens, after the windows popup I can't select cancel,it's on ok ( and no mouse available ) then I can't select one of the 3 propositions ( it always opens the log ). I have to say that the game is running back in the back ground and it's when I press enter nothing happen, space 'push' the ok and then game stops. Is that clear or not? Question 1 ---> Is there a way to get rid of this dxdag.exe window? / Is there a way to 'click' cancel even if the mouse is not showing an arrow on the box when I try to move the cursor, looks like it's in game in the background but disapear when passing by I did clean up/repairs/ all drivers etc all up to date. Crashed are both VR and non VR Also crashes happen irrelevent if I select the textures high, medium or low, terrain textures high or low, shadow etc... It also crashed on my laptop ( different config ) out of nowhere BUT there I was able to keep playing despite the DCS bugwindow staying open. Also Crashes are MP and SP. All terrain, and all modules Few mods are deactivated. I removed them then I also had crashes so put them back but deactivated. Unrelated to a trigger. Once It crashes when I start taxi, I restart the same single mission It crashes turning crosswind outbound... In multiplayer servers, sometime when I join, sometime when I select role, sometime during a dogfight. Unrelated if openxr toolkit on or deactivated or safe mode. Crash in all 3 mode Unrelated if I change the PPD display of my headset,Crashes in all resolution Question 2 ------> What do you need/ want me to upload, all the 68 files? Just the zip, what else? Today : 5 crashes both SP and MP, here are the log. I give up... I stay calm and focus but please do find a solution, I am playing DCS for the last 2 years and yes I had crashes but since the last updates it's unbearable. Thanks in advance here my specs : CPU : AMD Ryzen 9 5950x GPU : NVIDIA RTX 3080Tu Ram : 2x 32 go DDR4 Storage : 3TB dcs.log-20240814-065417.zip dcs.log-20240814-094907.zip dcs.log-20240814-094415.zip dcs.log-20240814-091346.zip dcs.log-20240814-071504.zip

You are right ! that was the reason, I guess it happened when I played with the a/g radar. problem solved

Hi, As said in the title, sometime when I push the depress switch to designate a target with TPOD as master the "designate" doesn't appear on the screen and the ground/target reference "depressed" is not showing. I don't understand why it's only sometime I got this. all different kind of GBU/mk/CBU. it looks like it's random. Any help? To be sure : -I am in A/G master mode - TPOD is selected as primary MPD - laser is armed - Master arm is on -A/g is "loaded" into the computer -Correct program set, with either CDIP/Auto, Step, Nose - Manual lasing or auto lase with correct laser code - Waypoint set as reference in the top LSK of the MPD ( don't remember which key ) but the one showing SP sometime or the WPT number selected as target - Area track selected ( I have checked with point track and the other one, no joy ) Thanks

Nice! Thanks Bud

@davidrbarnette could you post a link to this interview, I will be curious to see it. Same i’ve tried to find something about the reapers leaving EGUL, but no joy so far ( except paper article in Combat aircraft ). @Gorn_GER are you able to use nag on the f15e? Is it from the module or an external mod? How does it interact with nav flair projected on the hud? i found that your crew chief can ‘ load ‘ nvg to your aircraft on the ground but I don’ t find any bindings nor control to how activate it edit : never mind I found the binding it’s under helmet visor

I can see that data link pod is available on center station. Is it already implemented or will it be at a later stage?

I Got the same today. I've tried to refuel on the ground but no joy. I flew for 2hrs. Does it means when we got this bug it's unlimited fuel or are we just blind and can expect a flameout due to fuel starvation anytime?

Hi gents, Tried the f15e for the first time yesterday, I went for some bindings and for a full cold and dark procedure and most of the ( few but well done training missions ) here some questions / observations. ( sorry if some questions have been posted already, i went through this forum once or twice but can’t remember all. - first and foremost I playing VR and the f15e is the heaviest ( vr/computer perfo wise) a/c I had ever experienced… i am used to play with f15c, f5, mig21, f14 and f16c and the experience was smooth. Here with same config and settings that was unplayable. I had to basically put everything to minimum to be able to have a smooth experience, even for cold and dark sequence. I am wondering how it can be on heavy servers like tti or blue flag. - I got as well the align hold couple of time ( even tho I was respecting the step of the checklist - canopy clsd - brake hold - etc… ) I found out that : i was pre programming my mpd/mpcd for a/a , a/g and nav master mode as well as my 3 pages per screen and reviewing/checking it by snapping the castle switch. Doing that bring input on the flight controls surfaces and made them move. So it screws the process and go to hold. If I am not touching the stick at all it goes fine. Same if I go on stored mode for fast align. —> question here : can you fast align on MP servers? How is the accuracy degradation over time? Do we have in the system a page where we can find the accuracy? Like on my IRL aircraft I have a nav page where I can see the drift of my 3 ins in nm over time and when a certain limit is exceeded ( and not updated by gps position, because of spoofing or jamming for example ) i got an error message and then act accordingly. -- So for the questions ; - Can we remove the WSO? In the training mission I noticed that the GIB is not there and I like it. I know we should fly with a wso but as far as there is no integration like Jester, it’s just dead weight ( btw if we can remove it, is it shown in the a/c mass and balance, with all the gear it’s an easy 200 pounds saved ). Further more in vr he ( or she, af 21st century…) seems glocked and it annoy me a lot, it breaks the immersion to see someone static. Flew a lot with GIB and I am biased as dcs is all about the experience , I would like to tailor it to my taste/needs. - I find the brightness of the 2 mpd very dim, even at max level. I know they emulated crt’s but flew with some good old crt and they are way much more brighter irl. If I compare it to the f15c it is really different. I found really important with the radar, as I lowered my resolution with the current max brightness i am not able to read the altitude next to the track file. Bottom line, max brightness during day is less than a irl screen. Should it be in bug report? - Speed of the antenna tilt and tdc : I found the speed of the antenna tilt slower than an IRL mechanical radar dish. Is it like this in the mudhen or can I change the ´sensitivity’ via the controls mapping? - Stuck on the training mission with a/a missiles employment. I bound controls to cycle loop through guns srm mrm but I don’t know how to cycle between the aim7 and aim120. On the armt panel submenu I see is by default the right forward station on sby but as soon as I cycle the a/a radar screen popup iso the armt panel. - Is there a way the remove the pylons on the cft’s? Via ME I found that the center line pylon and wing pylons can be removed but even not loaded with bomb i see all those draggy stations along the aircraft. thanks for reading gents! If something else coming up I will edit the post.

Hi There, Hope you are all doing well, I am building an f16 pit at home, The MFD's are already exported via the Cubesim LCD screen and a custom LUA file and the DED is exported via DCS Bios. I would like now to get the RWR and EHSI exported. I Watched couple of tutorial on different extractor but I am a little bit confused. First things first, what kind of screen should I need? I found some LCD screen via USB or HDMI on internet but I am unsure of which one to choose. Does anyone have experience with the Winwing Instrument Display and the Winwing program? Is it possible to export RWR and/ or the EHSI? Thanks for your inputs, Regards, Damn