Vintovka

EVGA GTX 780 superclocked

Big improvement! I found the best setting to be throttle with the slider box check marked like you said but a curve of 27. With 30 curve I could slam into the AB detent and my afterburner would engage and disengage rapidly. It's pretty funny to see the massive black smoke trail from the AB engaging/disengaging so fast.

Ok I found that the curve set to -47 will give me full 100% power. Just over the detent now activates afterburner. The only problem with -47 curve is now the throttle is very sensitive. Should be alright though after some getting used to.

Thanks I will try this now. Edit: This is actually far more difficult than I imagined. Are you talking about tweaking X and Y saturation or are you talking about clicking the User Curve button and manually adjusting the sliders.

Is it possible to correctly set the afterburner detent on the throttle? Right now the range of the throttle only gives me about 80% power at the detent. I have to move above the detent for 90% and 100% throttle as well as afterburner. Is this actually correct or is there a way to have 100% throttle range and set the AB above the detent?

Yeah this is very true. I will look into this dot mod tonight. I am converting to labels for the first time in years of DCS:pilotfly: As far as MP I will keep in mind we are all in the same boat and try to get better.

Ah I thought perhaps he meant lowering my resolution. I misunderstood. Yeah sadly my monitor is only 1080p. I have capability to run higher but do not wish to purchase a new monitor.

Wow that is a bummer. Maybe EDGE will fix this problem? I cannot add GCI to MP :( I will add GCI for SP though thanks.

Slight right wing dip for me using TM Warthog. Maybe wind is a factor.

Well I am glad I am not the only one. Would a bigger screen such as using Occulus Rift fix this issue? I don't have one yet but hopefully the consumer version will release soon with decent resolution.

I may try this if I give up. I was under the impression that higher resolution would offer better viewing at distance. Do you mean texture res? I have all graphics to the highest as well.

Cannot visually acquire targets I have a 27" 1080p monitor running at 1920x1080. I cannot visually acquire aircraft to save my life. I dont use labels and I have to be practically on top of my target to see them. Its frustrating and makes air to air engagements hell. I cant find targets on radar and they end up on top of me with a heatseeker. Any tips or suggestions to help besides using labels? Do you guys think occulus rift will make this less of a problem?

Can we have a command for 3 position radar switch (Alternate radar - on, Alternate radar - standby, Alternate radar - off). I feel this would be perfect for the LASTE 3 position switch on bottom right of warthog throttle. Having the ability to toggle radar on and standby is very imporant with the 21 only have 25 minutes to 60 minutes run time. Many thanks for the awesome work.

Thank you for the beautiful aircraft and for supporting such a niche market of hobbyist.

I am going to purchase the Mig-21. Would it benefit you more for me to preorder now? Or rather I can wait until it is full price on 09/18. You guys deserve every penny. Look forward to flying.

Jesus Christ I never imagined the day I would hear all this talk of "balancing" on our flight SIMULATION forums. I want the aircraft I pay for to act as close as possible to the real life thing. I am paying for a flight SIMULATION not an arcade title. Digital Combat Simulator not Digital Combat Arcade

Hey thanks for taking the time to try and help out. Unfortunately when I attempt to "Load Profile" from the DCS options> F15C > controls menu nothing happens. I press Load Profile and double click the .lua file but it doesn't read any buttons and all of the keybinds remain empty. Ill try to find a webpage with keybinds I should have and just attempt to manually set it up. Thanks fellas for trying to help out.

Hey guys I am attempting to finally learn fast movers and A2A engagements. I cannot seem to locate a TM Warthog profile for the F-15C. I did some Google searching but I'm not finding anything. Anyone mind posting their personal warthog profile for the F-15C? Or can someone give me a list of the controls that need to be bound and I can find some buttons to throw them on? Like I said I am JUST getting into the jets.

Thanks a lot fellas for helping me make this purchase. I think I am going to pull the trigger on the second setup with the i5 and better graphics card as recommended. Can't wait to get in the air with it.

Yes I'm also in the "unplayable module" boat. I'm not even mad though I have been putting off an upgrade for too long. Just wish I could get some more help in my thread about it. Uh-1 was at around 15 fps for me. Really can't wait to experience 60 FPS at max settings. http://forums.eagle.ru/showthread.php?t=112899

Just wanted to add that yes the MI-8 lags my system much harder than any other aircraft. Its not even really playable for me. I am guessing its all the calculations of this large aircraft and all of the extra rotor blades. Getting about 7 FPS before shooting anything on just the tarmac. Forcing me to finally pull the trigger on a new rig. http://forums.eagle.ru/showthread.php?t=112899

I see both of you are running i5 CPUs. I'll have to look into them but are they preferred over i7? Thanks for the OCing tip I will definitely shoot for at least that amount. EDIT: Just looked at the i5 desktop and I can stick in a GTX Titan for the exact same amount of money. I just don't know which would be technically better. The i7 with gtx 780 or the i5 with the gtx titan. http://www.ibuypower.com/Store/Intel_Z87_Core_i5_Configurator/w/187014

Let me start off by saying BUILDING MY OWN is out of the question. Just pretend it is not even an option. With that out of the way I am looking to upgrade from my laptop running dcs at 7 to 12 FPS to a gaming desktop. I really have little to no knowledge of today's standards and "best" hardware etc. so here is the setup I came up with on this site. http://www.ibuypower.com/Store/Intel_X79_Core_i7_Configurator/w/186997 Now what I am asking is for some helpful input and YOUR personal preference to the hardware I selected. If it was YOU making this purchasing decision what would you change? What do you suggest and why? Things that get me is why is the Nvidia 770 with 4gb of ram less expensive than the 780 I chose with 3gb of RAM and what card would be better suited for DCS world. I am guessing it gets technical. Another thing is I chose for them to OC it 20%. What they don't explain though is whether or not the liquid cooling I chose can handle this 20%. Thoughts? I am hoping to max out DCS world at 60 FPS on a single large monitor 1920x1080 resolution. That is the only thing I wish to accomplish with this computer and nothing more. I sold a motorcycle for this desktop and I am looking to stay as close to or under $3000 if possible. I realize I am asking a lot of you guys to come in and give your opinion but I would greatly appreciate it. Look forward to flying with you all in the future.

Purchased to support our only company producing the most realistic rotary-wing aircraft simulations to date. Can't wait to learn this beast. Thanks Belsimtek for another great aircraft!

I am currently balls deep into Silent Hunter 5. I have all 70 (yes seventy) recommended mods from this list here. The mod list is on page 2. http://www.subsim.com/radioroom/showthread.php?t=192374 It took me several days to download them all due to D/L cap but it was absolutely worth it. The sim is unbelievable but as others have stated here it is basically unplayable without these mods. If you play it with this modlist you won't regret it. 100% realism with real navigation (your navigator uses dead reckoning and celestial fixes) and using the RAOFB wheel for manual targeting is such a feeling of satisfaction. Or using the Four Bearings Method to track a target completely by hydrophone and attacking from 20 meters depth never exposing your position... Gonna start it up now and start my next patrol. Tutorial vids on Four Bearings and RAOFB wheel.