Jump to content

HellsBells

Members
  • Posts

    248
  • Joined

  • Last visited

Everything posted by HellsBells

  1. Properties add DCS World\bin\DCS_updater.exe" DCS World\bin\DCS_updater.exe" repair
  2. Updated to 1.2.15 and have error with serial authentication. I noticed serial no displayed did not match the one I have. I changed the serial no to suit and server refused connection. Note: advised to disable the module (Mig21) and fault would be removed. After module removal and after a repair. DCS does not start at all. I pray it's not a full install again :(
  3. In regards to resizing the displays, is it possible to turn off the aspect ratio? with MFCD screens I need to resize the width and height. cheers
  4. I found if you are higher than 1200-1500 it does not work. Plus you must be off the ground I presume you changed the x,y etc settings to suit. I also set a key to activate the Cam ***************************************** As I run Eyefinity I changed the location of the Cargo Cam to the Top Right of the first monitor for a second monitor try 2750,25,424,537 ***************************************** _ = function(p) return p; end; name = _('HUEY MASTER'); Description = 'HUEY MASTER' Viewports = { Center = { x = 0; y = 0; width = 4808; height = 1200; viewDx = 0; viewDy = 0; aspect = 4.00666666666667; } } UH_1H_cargocam = { x = 1126; y = 18; width = 424; height = 537; } UIMainView = Viewports.Center ********************************* The only bug I found is a small duplicate screen appears when activated on my center monitor
  5. Try this works for me File: CARGO_CAM_init.lua Under the line: dedicated_viewport_arcade = dedicated_viewport add the line try_find_assigned_viewport("UH_1H_cargocam") or any name you like save: Now edit your Monitorsetup\huey.lua for example add the following UH_1H_cargocam = { x = 6251; y = 319; width = 920; height = 737; select your own x,y,w,h mine shows on the right MFCD Added JSGME file HUEY CARGO_CAM_JSGME.ZIP
  6. Thank you Flagrum, you were right on the money. :)
  7. I setup is Eyefinity (3 x 27) + 2 MFCD screens. I seem to have a split image on the main menu and it is also in game. I do not know how to remove the image split, as it is annoying.
  8. Same here, wish there was a "Save" feature for Missions.
  9. After numerous emails, and trying to make Thrust Master understand the problem. A friend gave me the "Warthog Throttle Calibration Tool" it cleared all the faults and fixed the Idle/Off problem... NICE
  10. Thanks I will advise the outcome when Thrust Master answer my support tickets.
  11. You hit that correctly. At idle 29/30 activate. have sent support ticket to Thrust Master. As you can see mine is reversed
  12. In the air or on the ground. I am currently using maple flag practice missions. everything is fine until i drop to idle. Then the engines shut down. The idle/off are reversed.
  13. Thanks I did not want to use the Target option Unfortunately same problem. The detent plastic has not been changed since new. But still activates 29/30 at idle and, turns off at the off position
  14. Thanks for your reply. I haven't used Target before, only Plug and Pray:) When using Target and move to Idle buttons 29/30 activate (R/Ctl End and R/Alt End) Nothing happens when moving to the off position. I'll try programming using Target GUI
  15. I have a problem with the Hotas Warthog. I start the A10C with the throttles in the off position.(Cockpit) Then shift to the Idle position and, start the engines. Take off etc all good. But when ever I drop the throttles to idle the engines shut down/MFCD turn off and, I have to try and restart the engine APU etc.
  16. Thank you for the quick reply. I had not noticed that it had installed the files under the mapleflag directory by default. reinstalled all good.
  17. I have the same problem in regards to the aircraft / aircrafts folders. Tac11 to Tac 17 installs into the aircrafts folder copied across to aircraft folder ok. When starting the campaigns I get an error: Mission file ./mods/aircraft/A-10C/Missions/en/Campaigns//AAT07 AG Gun and Rocket Employment.miz not found in " ./mods/aircraft/A-10C/Missions/en/Campaigns/Advanced Aircraft Training Qualification.cmp Only have the practice mission in single player
  18. Nice thanks Pancake.. did the same for the kA50 and works, :) hopefully "Icemaker" will have time to fix his excellent EMC
  19. The code is in the exe file. hopefully icemaker will do an update. in the interim I did a repair and the file structure reverted back to "aircrafts" I think in future I'll wait a while before updating. :)
  20. Arrrg the update has also screwed 'Easy Monitor Configurator" It looks for the "Aircrafts" folder now I have no MFD screens. Does anybody know how to fix :(
  21. Hi I have 3 x 27" monitors in eyefinity. I added 2 x 7" screens for the MFD's and again work well. Problem I have is I am too close to the cockpit hud. In all aircraft. In options i selected the view 7360 x 1200, with aspect of 6.13333333 which brings in the 2 x MFD's. I am not sure how to adjust the view distance from the Hud Many thanks Fixed editing the Snapviews did not solve the problem (still to close) Found PeterP excellent fix for "Proper Neck" I still have to make some minor changes as I'm a little far but its fixable http://forums.eagle.ru/showthread.php?p=1587429#post1587429 Thanks PeterP for the fix
  22. Sahaj, your the Man.. ordered my 10cm extension. Nice piece of work. Unfortunately I broke one of the connections on the cable. Not a problem Sahaj sent a new one. opp's accidentally sent the 7.5cm one. Again not a problem sent the 10cm extension cable and guys what a difference it makes. Quality work. Again thank you.:)
×
×
  • Create New...