Oldcooltronix

okay, then it'll continue in English ...:-) So I have the following active HUB. http://www.amazon.de/gp/product/B007TPFXEC?psc=1&redirect=true&ref_=oh_aui_detailpage_o09_s00 Once a variant 7 Port and 2 x 4 port. on the 7 port I have two 8 "Lilliput and a 4-port the other 8" Lilliput. in addition, the MFD Cougar Thrustmaster Hotas Warthog and the Logitech G13 and Advance Gameboard. Maybe your active USB - Hub too weak, have my 12V and 3A. Runs without problems ... :thumbup: Many Greetings, Tronix

Hi VR, da du aus Hamburg kommst, denke ich du sprichst deutsch... :-) Ich betreibe 3 8" Lilliput UM-80/C/T und habe damit keine Probleme... habe die ganz normal an einem 7 - fach USB Hub angeschlossen, Dieser ist allerdings ein aktiver USB-Hub mit eigenständiger Stromversorgung. Das benötigst Du, da die USB - Anschlüsse vom PC über einen nicht aktiven USB - Hub schnell überlastet sind und nicht genügend Spannung liefern. Hoffe ich konnte dir damit helfen. Grüße, Tronix

Hello everybody, I absolute beginner in things Inport / Export am I have a question. Can I because the software with opencockpits cards (MasterCard, USBOutputs) use? If so someone could help you set up? Have since no real clear view ... Thank you for your help and best regards

Hello everybody, sorry for my bad english, but unfortunately it is not my native language. :( I am an absolute beginner in the cockpit building. Unfortunately I do not know how I can get the SIOC export / import to run to. Can someone explain to me step by step how to do it and where do I copy the directory in which I need The various "lua" and the SIOC furnish? I look there really not. :cry: Thank you very much for your help.

Hi there, I have a Helios / DCS Black Shark 2 problem. to my Monitor Configuration: 1 x 24 "TFT screen as the main 3 x UM80T Lilliput 8 "USB Monitor, where the Helios Export (switches, lights, ABRIS etc.) runs on it. 2 x 22 "TFT, this should the gauges are exported on a 22 "it runs the export gauges and also works with Helios in the 3 x UM80T Lilliput 8" USB monitors. as soon as I "connect the second 22 (switches, lamps, ABRIS etc.) no longer works the Helios export, switches and lamps are still displayed in the Lilliput, but did not work, I can not press the switch nor the light lamps and ABRIS does not work either. As soon as I disable the Windows Aero DCS everything works, but unfortunately then break the FPS so that I can barely fly. Has somebodies idea or a solution to the problem ??? Thank you and best regards, Tronix

Hi there, I have a Helios / DCS Black Shark 2 problem. to my Monitor Configuration: 1 x 24 "TFT screen as the main 3 x UM80T Lilliput 8 "USB Monitor, where the Helios Export (switches, lights, ABRIS etc.) runs on it. 2 x 22 "TFT, this should the gauges are exported on a 22 "it runs the export gauges and also works with Helios in the 3 x UM80T Lilliput 8" USB monitors. as soon as I "connect the second 22 (switches, lamps, ABRIS etc.) no longer works the Helios export, switches and lamps are still displayed in the Lilliput, but did not work, I can not press the switch nor the light lamps and ABRIS does not work either. As soon as I disable the Windows Aero DCS everything works, but unfortunately then break the FPS so that I can barely fly. Has somebodies idea or a solution to the problem ??? Thank you and best regards, Tronix

Hi there, I'm looking for my HomeCockpit the KA50 G-Meter gauges for the Helios export. Unfortunately, in these gauges Helios is not available. Is it possible to download somewhere? In Capt Zeen Helios KA50 pit this is also not available. :cry: Thank you for your help and best regards

Hello Capt Zeen, since I have the same professional with whom I write ... :thumbup: sorry for my bad english and many thanks for your help. So the following: I have 3 monitors, as a Main content screen where I see the cockpit. On the other two on the left and right below the main screen. On the left I want the left cockpit - "Gauges" which outsource "Shkval" and on the right monitor the "shelters" and the right cockpit - "Gauges". In addition I wanted to Copy all of your "Capt_Zeen_KA50_v1.0b" the "Gauges" and put on my monitor configuration. You have with your Helios - made cockpit really great work ... :thumbup::thumbup::thumbup:

Hi, I have a problem: I use "Capt_Zeen_KA50_v1.0b for 16: 9 monitor resolutions users (1920x1080, for example)" and would like to copy the gauges on another monitor. The graphics of the gauges shall Helios on the second monitor but unfortunately not the Interfaces -> Bindings. Is there a way to copy them with, or do you have this grudge everything by hand. :( Thank you for your help. regards