Oldcooltronix

Hi Upuaut ahhh... OK... :thumbup: Thanks and best regards Tronix

Hello, I have my complete_upuaut_mods download, but can not find the staddons.zip and there is not the folder -> DCS World Open Beta / Bazaar / World / textures / staddons Thanks for your help, Tronix

Kurze Frage: wie verhält sich das eigentlich wenn ich mehrer Arduino benützen möchte? können die zusammen kommunizieren? Muss ich dann für jedes Arduino einen eigenen Sketch programmieren und die "connect-serial-port.cmd" öffnen, oder was gibt es hier für Möglichkeiten?! :helpsmilie: Danke!

1.Fuel gauge from KA 50 is always on even when the switch is off. 2.no function of the emergency switch of the landing gear for damage to the hydraulics. 3.Wipers the windscreen run after the turn not back to the starting position. 4.in darkness the FARP is not illuminated by the landing lights only when the texture of the FARP is to end, the environment is illuminated behind. 5.The HUD from KA50 is swirled by another helicopter standing in front of a by the waste heat from the turbines in their cockpit. 6.rackIR: Pilot can rotate 360 °, no limitation by the neck.

The HUD from KA50 is swirled by another helicopter standing in front of a by the waste heat from the turbines in their cockpit.

in darkness the FARP is not illuminated by the landing lights only when the texture of the FARP is to end, the environment is illuminated behind.

Danke für die schnelle Antwort... jetzt läuft der Servo... coole Sache... :thumbup:

Hallo zusammen, hat sich schon mal jemand mit dem Thema Servo im DCS-BIOS beschäftigt? Ich benötige da bitte mal Hilfe. Ich wollte mal das APU Panel beim KA50 testen und die APU Temperatur mit einem Servo darstellen. Haben versucht folgenden Code auf das Mega 2560 zu laden: DcsBios::ServoOutput apuTemp(0x191c, 2, 544, 2400); aber es kommt folgende Fehlermeldung: Arduino: 1.6.8 (Windows 7), Board: "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)" test:16: error: 'ServoOutput' in namespace 'DcsBios' does not name a type DcsBios::ServoOutput apuTemp(0x191c, 2, 544, 2400); ^ exit status 1 'ServoOutput' in namespace 'DcsBios' does not name a type Da ich mich gerade erst mit dem Thema DCS-BIOS beschäftige weiß ich nicht woran der Fehler liegt... :cry: Vielen Danke für Eure Hilfe und VG Tronix

I have a problem when I'm in the "HUD init.lua" when KA50 the value of "indicator_type = indicator_types.COLLIMATOR" on "indicator_type = indicator_types.COMMON" change, which is then added to the HUD upwards.

Hi, I would like 50 to change the HUD in KA in the size and position. This one can change in the "HUD_base_page.lua". Unfortunately, I do not know how, because in the A10 "HUD_base_page.lua" you can change the SymbologyBox_sizeX = 90 SymbologyBox_sizeY_min = -215 SymbologyBox_sizeY_max = 167 Unfortunately, there is this entry in the KA50 HUD_base_page.lua "no. :( White because someone how to do that when KA50? Thanks and best regards, Tronix

Hi, I would like 50 to change the HUD in KA50 in the size and position. This one can change in the "HUD_base_page.lua". Unfortunately, I do not know how, because in the A10 "HUD_base_page.lua" you can change the SymbologyBox_sizeX = 90 SymbologyBox_sizeY_min = -215 SymbologyBox_sizeY_max = 167 Unfortunately, there is this entry in the KA50 HUD_base_page.lua "no. White because someone how to do that when KA50? Thanks and best regards, Tronix

ah... okay... cool... thank you verry mutch... :thumbup:

Hi, how can you take control of the aircraft at the L-39? saw in DCS 2.0 that this works, unfortunately, do not know how. :( Many Thanks!

sorry the question was not where I turn on the SAI, but why it is always twisted in the DCS in flight... ...and if it is not so because, flying in helicopters realistic that you activate the SAI at the start and not only when the ADI has failed. :thumbup: ...and whether there is a DCS bug that the SAI always twisted in flight

Okay, thank you ... but is this a bug in DCS? Because in real the SAI switches but on when flying, does not it? :doh:

Okay ... now I have found the attitude, thank you ... :thumbup: You also have a tip for me for the (Standby Attitude Indicator - SAI). When I fly for a while, then the twisted and always falls out completely. :helpsmilie:

Thank you so much ... :D if I could help you with it then the images are indeed become good... :thumbup: Many Greetings, Tronix

attached by a link to some pictures to my KA-50 Pit... :D :joystick: http://www.directupload.net/file/u/58713/jqeuszkk_jpg.htm

@ VR: cool picture ... I think it's good that you limit your pit not only on patterns... :pilotfly: @ Destroyer37: I would then two USB - HUB go with its own power supply, then you're sure ... I have 2 x 4 USB - HUB active and 1 x 7 USB - HUB active and cougars run on a separate 4 USB - HUB separated from the liliputt ... :thumbup: Many Greetings; Tronix

Looking forward to the pictures... :thumbup: what a pit because you build, so the pattern? :joystick: :D

But very well ... :thumbup: problem solved, so now I also want to see pictures from the pit ... I have fitted my ka-50 Pit with switches and led ...:music_whistling: Many Greetings, Tronix

okay ... :thumbup: use google, there are safety with other users of win 8, so have a problem... :huh: what you can still do the latest USB to install drivers for your motherboard... many greetings Tronix

strange ... :( I have win 7 and as I said because it works without problems ... I can not say anything to the 8.1 power management to win, because I do not win 8.1. because to me there are too many problems with other drivers. have you possibly a laptop or another PC to which you can test it with the monitors? perhaps also your mainboard is a problem with the USB - port ... I would do once the test with another PC, or possibly win 7 install paralel to determine the source of error. That reminds me of a straight, you have the latest DisplayLink driver installed? You need for the function Lilliputs. :doh: http://displaylink.com/support/downloads.php Then everything should work ... :thumbup:

Hello everybody, Sorry for my bad eglisch, but it's not my native language... :( I am in the midst of building a KA-50 Pit and am working for weeks with the topic SIOC - Import / Export. I can tell you, this is a very complicated subject. Have been a few lamps and switches get up and running, but the only time to go offline. Online does not the export via the export.lua somehow and HELIOS does not work online.:cry: I think the DCS - BIOS much better and would appreciate a KA-50 support very much because SIOC is not suitable for DCS. There were probably times a "OAKES" has SIOC for DCS - created BS. Unfortunately, the folder structure in the DCS has changed. So you have to reprogram much and, what is full difficult. "Pancake" has already helped me a lot, but as I said, it really does not work. Enclosed out my collection of links to SIOC: Oakes: http://forums.eagle.ru/showthread.php?t=45377&highlight=oakes Pancake: http://forums.eagle.ru/showthread.php?t=122607 Miscellaneous: http://forums.eagle.ru/showthread.php?t=61725&highlight=A10+IOCP http://www.lekseecon.nl/opencockpits.html http://www.gadrocsworkshop.com/node/73 https://code.google.com/p/dcsbsexport/downloads/list Hope we get the export someday there together, so if I can help you.:thumbup: Many Greetings, Tronix

okay... :thumbup: Keep me up to date times if it would work with the new HUB... :joystick: Many Greetings, Tronix