MirabelleBenou

Hello ! I tried the takeoff test mission but I have a question. I started the aircraft and went to runway before 7 AM. If I takeoff immediately, nothing occur. If I wait, I only hear the instructor calling for the last 30 seconds, and then, nothing more (until it told me I missed the departure time). I'll try again and takeoff at 7, but shouldn't the instructor check for pre-takeoff checklist and authorize me to go on ? Thanks ! :-)

Hello ! Any news for this one ? :) Thanks ! Have a nice day.

I changed a little bit in order to not use TARGET (don't like it). With screenshots, it'll be better. Also, I was able to map Joy buttons within VoiceAttack (I previously had a problem because of an USB conflict with my older HOTAS). Here my VoiceAttack config : So : TX1/VHF1 on button 4 of the Throttle TX2/UHF on button 5 of the Throttle TX3/VHF2 on button 6 of the Throttle And here with DCS : I configure the default Com Menu to button 3 of the Throttle. Then, I configure a modifier button (the paddle on the Stick, which is Button 4 for him). And then, I add my commands with the modifier : So : VHF1 on Modifier + button 4 of the Throttle UHF on Modifier + button 5 of the Throttle VHF2 on Modifier + button 6 of the Throttle That way, I'm now able to : - Directly use the MIC buttons on the throttle when I want to (or can) use voices for com - Directly use the MIC buttons but with the Stick Paddle as a modifier when I can't use voices for com No more TARGET or scripts :smilewink:

Hello ! What I do myself : - Within VoiceAttack, I've bind ctrl-shift-alt-win-1 to TX1 - Within TARGET, I've bind MSR to ctrl-shift-alt-win-1 (VA didn't recognize my HOTAS, but this workarround works well) - Within DCS, I've bind the Pinkie + MSR to VHF-1 Do the same for UHF/TX2 and VHF-2/TX3. That way, when I can't make some noise, I'm able to use com without problem. Hope this help :)

I may have found my answer :) Just buy Vaicom Pro (very nice tool !!! Thanks !!!) and tried with C-101. Only TX-1 was activated on the PTT page of Vaicom, so 1 button and radio changes within the cockpit :) That's really impressive... And a big big thanks to Oliver Gaming for his french trad !! Merci m'sieur :)

Hello ! I just have a little question. For planes like L-39 & C-101, there is multiple radio but only 1 PTT with a dial to select the current active radio. I also fligh with the A-10C. In VoiceAttack, I let the default config for TX button binding because it works nice with the A-10C. How can I use only 1 PTT (and how to configure in VA ?) for c101 and l39 ? I think the single mode in PTT config tab of Vaicom may work, but I struggle how to configure 1 button. Also, is there a way to choose the TX with changing on the radio dial in the plane ? (For example, to change from INT to VHF or other one ?). Or must I use the little arrow on the vaicom config window ? (I would prefer to use onboard dial). Thanks !

When I took the screenshot, the GPU was still on. That's why batteries & generator are still off.

I love them ! With a little monitor behind, it works very well ! I bought this one : https://www.amazon.fr/gp/product/B07CK7D49Q/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

Hello ! I need a little help :) I've just flown one of the great practice of Rudel_Chw (thanks again for those !) and after looking at the replay, I found that I had a failure I didn't identified. The mission debriefing show "AW Shoot". What does it mean ? Also, I can see that it seems related to engine, but when looking to the gauges, everything seems ok. You can see below with the images. The failure happened immediatly after engine start up. Thanks for your help :) Have a nice day.

Hmmm, thanks, but the link refer to how install outside of google play with an APK file. The app is already installed on my device. I'm looking for a way to export it for people of this forum :-) I didn't find how to create an APK from an installed app.

Bump. Luckily, I still have it installed on my tablet. Is there a way to "export" it for other people ? This app is deadly simple and really really nice.

Very nice those SitRep ! Glad to see that the beast still get some love / work :) Thanks !

Ahh ! Thanks ! :)

Hello ! It seems that the "uncontrollable" checkbox option is gone (replaced by the "hidden on mission planner"). Have you any idea how to do the same without this option ? Thanks ! Have a nice day.

Rudel, maybe in the meantime can you upload them somewhere and put the link in your forum signature ? If needed, I can provide you a storage space in my google drive space. Just send me a PM :)

Nice ! Thanks ! Will give a try :) By the way, I already use a lot of your templates. Really like your work !

Thanks ! Yes ! I talked about 10°, but in fact it was 20. I used the 90 mil for 500 feet. Is the baro altimeter in feet or meters ? I have a doubt (and I didn't have the doc right now with me). When do you start your dive on your target ? Have you any tips for that ? Thanks !

Hello there ! I'm training with MK-82 and I'm looking for an "easy" way to identify when to start my dive roll and keep my configurer parameters. Exemple, when I set for a 10° dive angle attack, how can I know when to start my dive in order to be at 10° all the time until weapon release ? Thanks ! Have a nice day.

Ah !!! Really really nice !! Actually, I'm playing primary with the UH-1 & the Gazelle. But I'm also interrested with the KA-50 I also own. If you can also export the ABRIS & Shkval of the KA-50, that would be really nice, but it's not as important for me right now as I'm waiting for ED to update the cockpit before playing again with this beast :) Thanks for your kind effort & your great work !

Nice !!! Thanks Colo ! Something that may be interresting (but may not be possible) should be to have the commands indicator (not sure of the name,, the little transparent window you display with r-ctrl enter). It display the command axis, ... Really usefull for chopper. I do not even know if it can be moved on another screen.

Hello ! Just tried with an Android 6 tablet and it works well. Problem is only with an Android 4.1 tablet.

I've copied it so I don't think this is it. On the tablet side, the app remains on portrait mode and do not switch to landscape. Flickering occur only when I check Dual MFD.

Hello Colo ! Just tried this update and I have a problem. The screen on the tablet is flickering and do not display the MFDs data. I can only see my "view" (which is moving with my head). Also, when checking the dual MFD checkbox, nothing change on the table (only 1 MFD art). I have no error and config file seems good. Thanks :)

Hello ! Thanks ! Really nice ! May it be possible to have multiple folder for kneeboard ? One for each plane ? Should allow to have specific kneeboard :) Also, do you know when you'll be able to authorize 2xMFD side by side in landscape mode ? Thanks ! Have a nice day.

Thanks ! :)