IIIJG11 Reaper

Try this one: http://forums.eagle.ru/showthread.php?t=38123&page=2

On vista try it in another drive other than C:, this may help. Theres a few posts with similar issues, It may be an access issue with Vista. This is in no way proposed to be THE solution, however give it a go...

Noticed that after some landing gear damage in a campain, the landing gear would only extend to 3 quarters as per the damage model, on landing, the rear set held up and the front set was still trying to extend to full lock position, after all hydro/electric systems were shutdown. No real issue, unless its a way of saying,:smilewink: you cant re-arm as we cant fix this for the mission. Hell its prolly already been posted...:thumbup:

Im hearing you splashman,, ED may not have seen it, but to be honest i expect that it is because its not BS per say, its just not getting along with somthing on your system, I would like to try and figure it out, For BS its not a common theme among the community as a whole for the game to dump like this..sooo, Is your soundcard sharing an IRQ, is your pagefile windows set? Antivirus conflict? any troubles with the soundcard drivers at all during installation? Is the crash common among campain,missions,quick flight ect,, Myself and Tiger are from the IL2 community and would hope that we can help you resolve this. Keep plugging away, someone will figure it out...

Tiger,,,didnt even know u were onboard here,,,welcome..

Ok,,maybe best if i list some possible causes, maybe no help at all, but better than nothing. Sound mods...Have you installed any? Page file, Check your allocation size Getting a little slim on C: drive with availiable space Is BS installed to C: drive?,,better in another other than c: Power supply: I havent worked it out yet what your pw draw is, but what size is it? Onboard sound: ?? Soundkarte C-Media CMI8738/C3DX Audio Device , thought you had bought a new card? Have you updated MB drivers, which include chipset drivers, ide, usb ect.. Hope this helps some, all of the above could be causing you issues, BS itself is fairly stable, so at a guess its a system issue... Regards, Reaps

Mode 1 Nav Mode 2 Combat Mode 3 Emerg works well enough just short 2 buttons for Track IR but i reckon i have a subsitute avail in the first 2 modes..

Didnt want to butt in ruprecht, I certainly didnt mean for him to change config in game,,my bad i didnt explain this, :music_whistling: Still think he,s trying it on the wrong side with his monitor on the left. I guess physically it can be, just not in Windows properties. Just lovin the 2nd monitor, trying to get the rest of the JG11 guys converted now...

Maybe this helps,,,as my options appear ingame::thumbup:

Im just using 1680x1050, and dont forget this setup allows for the 2nd monitor to be on the right, so make sure in the Windows display properties you have your second monitor on the right, ie your mouse moves from far left of the main to far right of your 2nd monitor. Let us know how its going.

Ok m8,, I,ll post copies of both and if they are not right, its ok because it works a treat for me as is..:thumbup: ["multiMonitorSetup"] = "2monitortest", ["color"] = "32", ["heatBlr"] = 1, ["scenes"] = "medium", ["water"] = 2, ["fullScreen"] = false, ["visibRange"] = "Medium", ["aspect"] = 3.55048, (This is the aspect that i had not changed originaly, after the change all good) ["textures"] = 2, ["shadows"] = 1, ["display_mode"] = { ["avi"] = { ["bpp"] = 32, ["resolution"] = "640x480", ["full_screen"] = false, ["aspect"] = 1.333333333, ["height"] = 480, ["width"] = 640, }, -- end of ["avi"] }, -- end of ["display_mode"] ["effects"] = 3, ["lights"] = 2, ["haze"] = 1, ["terrPrld"] = "20", ["height"] = 1050, ["resolution"] = "1680x1050", ["civTraffic"] = 1, ["width"] = 3728, }, -- end of ["graphics"] } -- end of options Center = { x = 1024; y = 0; width = 1680; height = 1050; viewDx = 0; viewDy = 0; aspect = 1.60000; } } Shkval = { x = 2704; y = 0; width = 512; height = 768; } ABRIS = { x = 3216; y = 0; width = 512; height = 768; } Maybe you can have a look and see what you think...:smilewink:

Well just to be correct,, We aint poor,, We just know bang for buck.....

Yes a little more demanding on the CPU, Your are really probably on the low spec side, hard to say what sort of FPS could be achieved on your system, Either way its a great sim, just buy it an deal with it then...lol :)

Sure m8, Its was the resolution in the avi of the Options LUA, I had not adjusted this, which in turn had spread the main screen onto the 2nd monitor. Thanks again..

Thanks ruprecht,, Finally got there, thanks again for your help and posting the Excel..Magic, Worh ya Weight in gold..:thumbup:

Ruprecht, Unfortunatley I am still in the same boat, thought you had pointed out my obvious issue, but i still have the same problem with the main screen just extended onto the 2nd Monitor. Following all the principals, i just cant understand why this continues to just expand the main screen onto the 2nd monitor with no A or S to be seen.....I can understand you would be frustrated by now, Im not one to give up because i have had it close when i was using my 36" as my main and the 21 as the second monitor, seems i have gotten further away using the 21" as main and a 17" as a 2nd. Aggggggggggghhhhhhhhhhh,,just wanna smash it....

Thanks m8,,, I feel like a complete Dick,,,:cry: Your patience has been great..:thumbup:

rgr,,as below: Viewports = { Center = { x = 1024; y = 0; width = 1680; height = 1050; viewDx = 0; viewDy = 0; aspect = 1.6; } } Shkval = { x = 3216; y = ; width = 512; height = 768/2; } ABRIS = { x = 2074; y = 0; width = 512; height = 768; } and Options: ["bpp"] = 32, ["resolution"] = "640x480", ["full_screen"] = false, ["aspect"] = 1.333333333, ["height"] = 480, ["width"] = 640, }, -- end of ["avi"] }, -- end of ["display_mode"] ["effects"] = 3, ["lights"] = 2, ["haze"] = 1, ["terrPrld"] = "20", ["height"] = 1050, ["resolution"] = "1680x1050", ["civTraffic"] = 1, ["width"] = 3728, }, -- end of ["graphics"] } -- end of options Gawd,,Pain in the arse ay?,,,sorry ruprecht

Ok m8. Think i best mention i am using 2 vid cards, non SLI, could this be my issue?. And yes m8 im using the correct editing tools for the files. Thanks again for your help i appreciate it a heap.:thumbup:

Thanks Viper, but Vista hasnt got that ability,,:( But heres a few cropped pics so you can see and prehaps help me out. You can see that the cockpit is actually on the 2nd monitor aswell with no Arbris or S to be seen. A shot from inside and out.....Thanks again.:thumbup:

Ok,,,its close,,, I will bring my camera home tomorrow and take a pic, and see if you can help me further if thats ok,,,Cheers...

Thanks m8,,, As for the VAAF,,,well i would but i have been with JG11 for around 5 years now in IL2FB, an we are just getting our BS squad together now...Cheers:thumbup:

ruprecht, As i see you are fairly well versed in the multi monitor set up, was wondering if you could give me a hand please, and the fact your a fellow Aussie. Currently using Vista 32, 1680x1050 main and a 1024x768 as the second monitor on the RIGHT, I have a 3rd monitor but just to get 2 going properly first would be nice. I have had it close a few times but just cant seem to get it right, and i get further away from it each time i dabble with it. Files as below: Viewports = { Center = { x = 840; y = 0; width = 1680; height = 1050; viewDx = 0; viewDy = 0; aspect = 16/10; } } Shkval = { x = 1680; y = 225; width = 512; height = 460; } ABRIS = { x = 2192; y = 0; width = 512; height = 768; } and the options LUA as follows: { ["cockpit"] = { ["mirrors"] = false, ["reflections"] = false, ["avionics"] = 4, ["russianHud"] = false, }, -- end of ["cockpit"] }, -- end of ["views"] ["difficulty"] = { ["padlock"] = false, ["easyRadar"] = false, ["enemies"] = true, ["setGlobal"] = true, ["immortal"] = false, ["geffect"] = "realistic", ["easyFlight"] = false, ["permitCrash"] = false, ["radio"] = false, ["tips"] = true, ["fuel"] = false, ["aftSwitching"] = false, ["cockpitLanguage"] = "english", ["units"] = "metric", ["externalViews"] = true, ["hud"] = false, ["myPlane"] = false, ["iconsTheme"] = "nato", ["map"] = true, ["weapons"] = false, ["allies"] = true, ["labels"] = true, }, -- end of ["difficulty"] ["audio"] = { ["wind"] = 100, ["radio"] = 100, ["musicEn"] = false, ["engines"] = 100, ["soundEn"] = true, ["effects"] = 100, ["music"] = 0, ["radioSpeech"] = true, ["warnings"] = 100, ["volume"] = 100, ["inCockpit"] = 100, ["mech"] = 100, ["subtitles"] = true, ["gui"] = 70, }, -- end of ["audio"] ["graphics"] = { ["multiMonitorSetup"] = "1camera", ["color"] = "32", ["heatBlr"] = 1, ["scenes"] = "medium", ["water"] = 2, ["fullScreen"] = true, ["visibRange"] = "Medium", ["aspect"] = 1.6, ["textures"] = 1, ["shadows"] = 1, ["display_mode"] = { ["avi"] = { ["bpp"] = 32, ["resolution"] = "640x480", ["full_screen"] = false, ["aspect"] = 1.333333333, ["height"] = 480, ["width"] = 640, }, -- end of ["avi"] }, -- end of ["display_mode"] ["effects"] = 3, ["lights"] = 2, ["haze"] = 1, ["terrPrld"] = "20", ["height"] = 1050, ["resolution"] = "3360x1050", ["civTraffic"] = 1, ["width"] = 3360, }, -- end of ["graphics"] } -- end of options Appreciate any help you can provide, I can manage multi million dollar jobs but can not set up multi monitors,,,lol:doh:

G,day guys,, Was wondering if anyone in the know can tell me how to have the F6 Wepons view behind the wepon rather than having to move it behind to watch the strike.? Any file we can diddle to make the view behind the wepon as default? thanks..

Try this one if you like..:D BLACK SHARK 1.rar