FAB Maverick

Hello guys! 3 points here about this tanker The first one... it's impossible for 2 jets refuel at the same time... The second... The refueling "basket" doesn't attatch to the jets refuelling boom very well... a tiny movement and you loose it very easily...... it doesn't move freely as the KC 130 and the IL76 baskets... The third one... takes forever to fill the tank....very very slow fuel transfer...

The chaff and flares counter displays wrong reads. First, its inverted... showing the amount of flares as amount of chaffs and vice-versa second.. it shows wrong amount... take a look at these 2 pic below... had just 20f and 0c but the counter was telling me that i was with 19c and 9f

1 - When other player lands on carrier, the wire miss. You just see the hook! 2 - Cat shuttle sometimes bugs after a launching. It stays fixed in the middle of runway.

Hello! There's a bug in cvn74. it's unable to select the parking number. it has only AUTO option. CVN 70 has 4 parking spots.

i am using CCPL + PI. and its not working

I agree with everything! INS is useful for MK82 bombs. GBU uses Jtac. Doesn't makes sense use guided bombs with ins. but i will check this. Ill try with gbu and see if it releases at the correct time

hello baltic! I did the full training of M2000c when i was in 1.5.8 version There, it works. I didn't try this lesson again in 2.5 OB version. I will check this now!

Hello Guys! I wanna know if INS bombing on M2000c is with problems? Bugs? I created a mission to practice the INS bombing using caucasus map Starting in the air, 15 miles north of wp1. I use the "cheat" of disabling gyro drift and ins not requiring alignment! Put the wp1 10.000ft high and 22.5nm NW from the abandoned airfield in kobuleti (the famous X of Kobuleti), and on the middle of this afb, put a bunker to be destroyed! i set the WP1 as the IP. it is exactly at north of Poti City over an island where the river flows into sea. Set everything properly (-9967ft, 22.5nm, hdg 158 ) and it is not working. Strangely, after i pass the wp1, those directional "wings" appears on the hud telling me where the target is and the release bar starts going up near the target. The cross should be over the target, but it appear over the sea. If i pull and hold the trigger when the bar is going up, it releases the bomb immediately! The miz file is attatched! Thanks INS TRNG SP.miz

Thanks for the information Grimes! Didn't know this "shortcut"

Fast Zooming PLEASE!!!. You added + and - to zoom, but it's too slow. Should be faster! It's terrible to use my mouse scroll to zoom on the map! Why not come back with password on missions, to avoid third ones from editing and preserve Copyrights??

Just reporting! I was calibrating the throttle of my X52 pro and when i clicked on OK, the game got a black screen and freezed! had this problem with Russian aircrafts from FC package. M2000-c No damage smokes or fuel leakage seen by the player. If you get hit, just the other ones will see fire and smoke... On MP, if you eject the canopy, other players sees it opened and not ejected.:lol::lol::lol: When calibrating the altitude, if you use the scroll of your mouse, the number (mbar) starts growing or decreasing according the movement and suddently it goes back to the previous number and then continues....it's like... 1000>>1001>>1002>>1003>>1002>>1004 After a landing, the DECOL light turns on and just a new take off to turn ir off again.

Hi guys! First, happy new year for you all! Well, there's a huge discount on this module until january 3 and i would like to know the opinion of the ones that have it. Does this module worth it? Is it with a lot of bugs? How is the support of aviodev according to update releases? Are they working on it or taking long time to release issues fixes? Thank you!

Sorry but i disagree. My cpu is enough for this card. I72600k still a good cpu!! With sure i would have a better performance with newer cpu's, but,, this one can handle my GTX. Another point. DCS with everything maxed out here doesn't use more than 50% of my cpu bound. It's enough for the game. Luckily, A friend bought the same card and he has the Ryzen1700X Cpu. He will install it tomorrow and we will compare with each other. Yesterday, i was flying a instant action with a-10a in NTTR map. With everything maxed out, took more than 100fps most part of time!

Comparing, i should have a better performance, cause my vga is the model Ti, more powerfull and i use a resolution a little lower than yours, 1080p. But..... My computer is older. Your Core i5 is better than my i7 2600k in single thread or comparing 4x4. And you overclocked it to 4.4 haha. i7 is just better for those applications that uses the Hyper Threading. I think DCS doesn't take advantage of it. Point for you! Another reason is my PCI-E version 2.0. it supports a Titan Xp without lacking, but, cause of technology of PCI-E 3.0, it has a better response time, so, boards with it, take up to 10 fps gain, according to the VGA model. Another point for you haha! With the tests, i took a conclusion... There's no lack with my graphics. The problem is the DCS, that is "heavy" for even a 1070 with graphics maxed out (and they recommend a 780Ti haha) Thanks a lot for your support!!!

i7 2600k @ 4ghz all cores

Hi Art-J What deferred shading does exactly? The question here is to compare performances in the same settings. Bought a new VGA and i got a little surprised about my fps. Little gain, about 10 fps comparing with 970, and pascal architeture is much more powerfull than Maxwell. Would like to see your results with these settings for a comparison. Thank you!

Hi noisy! How do i clear the shader? thx

Hi guys! Just got the new ROG Strix GTX 1070Ti. Amazing card! beautiful, cold, but, i didn't see much more performance comparing with my old card, MSi Gaming GTX970. The TEST CONFIG is: FRAPS 3.5.99 (can use the in game Rctrl + pause too) MSI AFTERBURNER MEASURING GPU AND CPU DCS 2.2 VERSION MAP NORMANDY GRAPHICS QUALITY AS BELOW *1080p *Everything maxed out, including those 4 sliders (trees distance, preload radius,chimestry, etc..) *Cockpit Displays 1024 (not every frame ok!) *MSAA 8x *Deph of field OFF (i don't like it) *Lens effects Dirt + Flare *HDR OFF *Defferred Shading (what the hell is this?) ON *Anisotropic Filter 16x *Shadows Defaut *Cockpit ilumination OFF THE TEST *Using the Instant Action with TF-51 in Flight and using default view inside cockpit AWAYS looking straight ahead: Got about 60FPS with the new card *Using the Instant Action with TF-51 in Take Off and AWAYS inside cockpit: - Looking front: 58FPS - Looking Left Wing: 60FPS - Looking 7h: 62FPS - Looking 5h: 59FPS - Looking Right Wing: 53FPS GPU LOAD: 99% most part of time GPU CLOCK: 1848 Mhz GPU TEMP: 62ºC CPU LOAD: 40-50% CPU CLOCK: 4Ghz CPU CORE TEMP: 60ºC (tcase temp 50C) So, i just wanna know about you, that have GTX1070 ou 1070Ti. Please do the same test as described above and post here your results! Would like to know if it's the dcs or my system that is not good enough for my card. Thanks!

A few hours ago installed my 1070Ti. Got about 61 fps. All maxed out, including MSAA8x. My last card was a gtx 970, didn't see much difference. I was hoping much more performance. Using the last WHQL driver available.

Hi people! Anybody knows how to zoom in and zoom out using keyboard or just the mouse wheel works on it? I was looking for it but just found the ones below: A = Airplanes S = Ships H = Helicopters U = Ground Units (tanks for ex) O = Objetcs (structures) Lctrl + c and Lctrl V = copy and paste objects Any other ones? Thank you!

Hi feefifofum! Thank you for answering. I was changing the start time on each aircraft. So, was not necessary to create a trigger and neither use late activation, however, the plane was appearing just at the designated time, and that was a problem. I was wanting it to show up as i start the mission. So, your hint was the solution of my problem! "If you would prefer all the aircraft to be visible, check the "uncontrolled" box and leave "late activation" unchecked. Now, with your group selected, click the "triggered actions" tab at the top of the waypoint menu and then click add -> perform command -> start. You can then use simple triggers such as "TIME IS MORE" to delay your big jets by a minute or two so they don't have taxi accidents." You just forget to put on trigger action AI TASK PUSH and select the task above! Man!!! You are "the guy"! Thanks a lot!

Hi people! It's my first interaction in this forum, and i am not a native english speaker, so i'll apologize if i commit a mistake or write something wrong! Well, i've been having problems when using AI big planes, like tankers, awacs, heavy bombers, transport in my missions! What happens is that they get stuck on the taxiway, or hit each other on taxiway or when ingressing on the runway! This happens randomly. Sometimes the first one stucks, then you try again and the third one stucks, or the second one stuck and crashes with the third one. Other times, the last one (4th) stucks!!! I tried putting them, on the same airport, but in far parking spots, and wasn't successfull! Another problem. The next plane to take off does not hold position until the plane ahead takes off. They ingress together and almost hit each other (sometimes hit as i told above) I tried with just 3 airfields: beslan, Mineralnye and batumi. All of them i got the problem. Probably, it's a general problem, i think! As an example: Open your ME and on batumi, put an IL78 Tanker, an KC135 Tanker and an E-2 AWACS in any order! They will get stuck! Anyone have any idea to solve it or evade this problem? Thank you!