Canemista

that is precisely why I've added a link to video and a trk file I didn't change the Snapviews at all and the FOV is "defaulted". could it be that something changed after update... will clean up the view files and try again..

is this a thing or just some setting on my side? whenever I open up AI overlay the screen moves a bit unless I look perfectly straight (haven't flown the apache for some time and just noticed this just this morning) single monitor setup (1080p) with opentrack here one can see how far the "view" moves when the overlay shows Below is a dropbox link with video and a trk file >link< -----------UPDATE--------- it looks like the overlay is conflicting with headtracker as when without it (just turning head with keyboard) it doesn't happen but when turning any headtracking on (trackir, freetrack - different protocols) the view gets funky and this happens only for AH-64 module

@ OP - that would be helpful in some cases... especially when you "run out of trim" and want to reset it without ripping of rotor @Schlomo1933 - to have the AP in "realistic mode" I'd say you get a FFB stick and you'll get what you need to have a more realistic feel in cockpit otherwise with self centre joystick you got what you get and no helo sim will ever be realistic @Taz1004 - try to bind somewhere a "director control" - in cruise or hover I trim the AP (by holding trim button to keep the computer do it's job so I can focus on ie. navigation), in combat manoeuvres I fly with "director" OFF, that way you can use the stick and trim like any other DCS helo. keep in mind that this overwrites any set heading, alt, bank, pitch modes into "stand by"

full clean install of DCS sorted it for me too ... 200GB redownloaded

^^ that's the error I was getting when I tried to install the Viggen before it went free this morning

the old log with the .dll error is gone and last night log got overwritten so all I have is this bit with IC fail 2020-06-19 06:03:45.479 INFO Dispatcher: Loading installed modules... 2020-06-19 06:03:45.942 INFO SECURITYCONTROL: Loaded mods/tech/wwii units/dcs_module.pak.crypt 2020-06-19 06:03:45.953 WARNING SECURITYCONTROL: IC fail: mods/aircraft/ajs37/bin/ajs37.dll 2020-06-19 06:03:45.961 ERROR SECURITYCONTROL: Manifest 'mods/aircraft/ajs37/dcs_manifest.bin' failed 1 file checks. 2020-06-19 06:03:47.951 DEBUG Scripting: Scanning usermods... 2020-06-19 06:03:48.913 DEBUG Scripting: WARNING: task 36 is missing 2020-06-19 06:03:48.995 WARNING LOG: 2 duplicate message(s) skipped. ... 2020-06-19 06:03:49.195 DEBUG Scripting: ./Mods/aircraft/AJS37/entry.lua 2020-06-19 06:03:49.195 INFO Scripting: OBSOLETE mount_vfs_sound_path() used in ./Mods/aircraft/AJS37/entry.lua 2020-06-19 06:03:49.195 DEBUG Scripting: ./Mods/aircraft/AJS37/Entry/Suspension.lua 2020-06-19 06:03:49.195 DEBUG Scripting: ./Mods/aircraft/AJS37/Entry/Views.lua and that bit of AI spawning. from mission start up to getting into another module 2020-06-19 06:22:35.741 INFO DCS: Screen: mission_offline 2020-06-19 06:22:35.742 INFO Dispatcher: precache units resources in slots 2020-06-19 06:22:38.874 DEBUG LuaGUI: ------- onSimulationStart--ссс---- 2020-06-19 06:22:38.874 DEBUG LuaGUI: ------- onSimulationStart------ true false false 2020-06-19 06:22:38.878 DEBUG LuaGUI: ---onBdaShowHide()--- 2020-06-19 06:22:38.878 DEBUG LuaGUI: ---onCreateBda()--- 2020-06-19 06:22:38.878 DEBUG LuaGUI: BDA setMode: a_mode, bBdaIsOnOff = min true 2020-06-19 06:22:38.894 INFO Lua: Lua CPU usage: metric: average mission loading: 1.8772 % 2020-06-19 06:22:38.894 INFO Dispatcher: loadMission Done: Сontrol passed to the player 2020-06-19 06:22:49.401 DEBUG LuaGUI: ----onSimulationResume--- 2020-06-19 06:22:49.408 INFO DCS: MissionSpawn:spawnLocalPlayer 3,AJS37 2020-06-19 06:22:49.513 INFO Lua: Lua CPU usage: metric: average mission execution: 1.5408 % 2020-06-19 06:22:49.554 INFO TACVIEW.DLL: Recording flight data in [D:\Games\MODY\DCS\TOOLS\Tacview\Tacview-20200619-082250-DCS-_FreeFlight-1.1.zip.acmi] 2020-06-19 06:22:49.555 DEBUG LuaGUI: ----onSimulationPause--- 2020-06-19 06:22:50.823 DEBUG LuaGUI: ----onSimulationResume--- 2020-06-19 06:22:50.838 INFO EDCORE: (wcTanker)enterToState_:0 2020-06-19 06:22:50.838 INFO DCS: wcTanker::onEvent:4 2020-06-19 06:22:50.838 INFO EDCORE: (wcTanker)enterToState_:1 2020-06-19 06:22:50.838 INFO EDCORE: (wcTanker::Channel)enterToState_:0 2020-06-19 06:22:50.838 INFO EDCORE: (wcTanker::Channel)enterToState_:1 2020-06-19 06:22:50.839 INFO EDCORE: (wcTanker)enterToState_:0 2020-06-19 06:22:50.839 INFO DCS: wcTanker::onEvent:4 2020-06-19 06:22:50.839 INFO EDCORE: (wcTanker)enterToState_:1 2020-06-19 06:22:50.839 INFO EDCORE: (wcTanker::Channel)enterToState_:0 2020-06-19 06:22:50.839 INFO EDCORE: (wcTanker::Channel)enterToState_:1 2020-06-19 06:22:50.840 INFO EDCORE: (wcTanker)enterToState_:0 2020-06-19 06:22:50.840 INFO DCS: wcTanker::onEvent:4 2020-06-19 06:22:50.840 INFO EDCORE: (wcTanker)enterToState_:1 2020-06-19 06:22:50.840 INFO EDCORE: (wcTanker::Channel)enterToState_:0 2020-06-19 06:22:50.840 INFO EDCORE: (wcTanker::Channel)enterToState_:1 2020-06-19 06:22:50.840 INFO EDCORE: (wcTanker::Channel)enterToState_:0 2020-06-19 06:22:50.840 INFO EDCORE: (wcTanker::Channel)enterToState_:1 2020-06-19 06:22:50.873 DEBUG Scripting: make: country: 7 2020-06-19 06:22:50.873 DEBUG Scripting: Phrases make : key = 2 2020-06-19 06:22:50.873 DEBUG Scripting: Phrases make : key = 4253 2020-06-19 06:22:53.444 INFO Lua: Lua CPU usage: metric: average mission execution: 8.0256 % 2020-06-19 06:22:53.444 DEBUG LuaGUI: ----onSimulationPause--- 2020-06-19 06:23:00.564 DEBUG LuaGUI: ----onSimulationResume--- 2020-06-19 06:23:00.573 INFO DCS: MissionSpawn:spawnLocalPlayer 80,MiG-15bis

I do use antivirus but the DCS folders are excluded from any type of scan. but disabling antivirus was also done (updating the main post)

The last OB update 2.5.6.50979 broke my Viggen :( at first I was getting IC about AJS37.dll and then AJS37.dll file write permission error reinstalled the module - no help repair DCS w/ module - no help repair DCS w/o module - no help repair DCS w/o module and removing all mods - no help manually deleting files from base and savegames folders - no help Antivirus on/off during the above steps - no difference then I saw the free week for Viggen and thought that'll fix it... It kinda did as now I can install the module with no issue but can't use it. It's present in module manager and check "installed" but not showing in main menu as "active", no instant missions available and when I try a custom mission and try to get in the cockpit it just blocks me out like a module I don't own and the AI takes over Does anyone had this problem and is there a fix? Note. In latest SABLE 2.5.6.49798 it's working fine

Deployment: 7th mission NARZAN VALLEY https://prnt.sc/s5wg97 and Georgian Oil War - 1st mission https://prnt.sc/s5wglw same story

I 2nd that. very nice guide

got FC3 on a recent sale and somehow they are still more confusing than full fedelity modules ::D thanks Cap! I got what I needed

ok, thanks for the replay. Looking forward to the new Shark

*bump*

Hey there! I found a strange mirrors issue in few modules only. the bug shows (afaik) only in: -Ka-50 https://prnt.sc/ozimnm https://prnt.sc/ozimzm -Mig-29A and Mig-29G https://prnt.sc/ozinik But no other modules that I own i.e. Mi-8: https://prnt.sc/ozio3m Mig-21: https://prnt.sc/oziod8 Mig-29S: https://prnt.sc/oziopn What's funky is that in all Mig-29 variants only the S get the mirrors correctly also Harrier, Viggen (a bit off but okish) and all piston modules are just fine. - I've looked into Snapviews.lua and SnapViewsDefault.lua- messing with them, deleting the files to no avail. - MonitorSetup won't change anything - no graphics setting make changes in those mirrors No other ideas where to look for any settings to fix this