Matt Glover

Bump

Thanks I have tried multipoe configurations and though as much. wonder why its still not implemented

I am using 2 X PP targets on STA8/2 with 2 X GBU38's on each Pylon. setting loft angle to 30 and pull up to 30 with the Pickle held down. both STA8/2 set so Qty 2 is shown on MFD. no matter what I do I cannot get the to auto loft but I can do them in Man mode. I don't think I'm doing anything wrong. could it be that there are 2 GBU's on each Pylon? I know I would have to Cycle to PP2 on each Pylon to get the 2nd 2 off but even the first 2 don't release.

Can anything in the mission options effect the Datalink?

seems to be map related after hours of testing with 3 separate people all yielding the same results. doesn't happen on Caucuses didn't test any other maps.

So we just tested a lot of mission files I made to rule out the following as issues: Tested with no carrier settings(TCN / ICLS / L4 / ACLS) and with all settings - no change Tested with and without copies and pasted aircraft - no change Tested with and without AI ships and aircraft - no change Tested identical unit setup with all carrier settings enabled but on Caucuses - worked as it should. Conclusion is pointing towards something on Mariana causing the issue, I don't know what it might be - Radio Frequencies? ADF? TACAN? Hope this at least gives you something to look at.

Could the tanker awacs or extra ships cause it?

Could changing the Map help? Could Having the aircraft in Groups fix it? I don't see either as being the cause but at this point just want to know WTH is wrong.

CASE_I_II_JTF15_TEST_-20240116-114248.trkAircraft 2 Track

server-20240116-015826.trkI think this is the correct server track

See attached. We believe its something to do with alignment: here's what we did: 2 aircraft Joined and did CV RF alignment with Link 16 also on: Both see each other on the SA until alignment actually begins and can for that brief time Set Donor or Member. Once alignment begins both loose SA contact for each other. At all times with L16 on we can see the E2 and S3. Intermittently we are getting donor PLID contacts for each other we assume that are being donor supplied by the E2. 3 aircraft Joined: Aircraft 1 CV RF Alignment L4 only on until alignment then L16 on once aligned. Aircraft 2 CV CBL Alignment L4/L16 off until aligned. Aircraft 3 IFA Alignment L4/L16 off until aligned. Again same results as above we all see the E2 S3 with L16 on. Aircraft 1/2 never saw each other on DL. 1/2 see 3 for a brief period once aligned and then DL turned on then nothing. Mission is basic setup every aircraft is 1 of 1 with no datalink connection or edits after placement. Carrier is CVN73 73X ICLS 11 / L4 336.0 and ACLS on. s3 HAS TACAN 74X. all aircraft have EPLRS on in advanced WP0 actions. can someone please help us. I really think its a bug or something small is missing that I am doing wrong in ME or we are all doing in the sim. All other systems seem to be unaffected and it seems to go out of wacky at the start of alignment or if already aligned it goes wacky after a few seconds of DL being turned on. Player-AI seems fine its P2P that seems the issue. CASE I II JTF15 TEST .miz CASE I II JTF15 TEST -20240116-114337.trk Tacview-20240116-114400-DCS-Client-CASE I II JTF15 TEST .zip.acmi Irrelevant as L4 is working to get CV RF just fine and its L16 P2P that is the issue. done IFF On or Off same results and the rest of the stuff you talk about here is Radar not DL.

Yer its does work.

IFF on DL first and 2nd Page on.

Without AWACS: DL on my aircraft and wingmen but we still don't see each other on SA, does DL not work without an AWACS? I have Members and Donors all setup in the ME but still people on DL show up as yellow brackets(unknown). I have ACLS enabled on Link 4 on the CVN on 336.0 which is also the default datalink channel could this be effecting it? struggling to see why its not working. EPLRS is set to come on at WP 0 also for all aircraft.

I have the original Normandy and I have a licence in my licence list for V2.0 but I cannot find when I purchased it and I still have the "Buy" button available to me in the store. how can I confirm if I have 2.0 installed or just the updated original version? As you can see I never purchased it but I have a licence.