dnnzed

-

Hahhh... What a synchronicity... I just wanted to ask it at the day. :-) Because I was just a click from the moment where I buy FC3 at the e-shop, than suddenly my eyes stucked on the number "min. Ram> 6Gb"...Duh. I have the same config as the asker of this thread (but GTX275). So, is it "safe" for me to buy FC3? Will it start/run with only 4Gb of Ram?

:) Ahh, it's cool! Thanks!

Hi, I use the HAT switch on my X52 for slewing the TDS cursor which is - as you know - not really precise. Is there a config file (or something) where I can change its rate? (Make it slower) I don't want to replace the X/Y Rotators control to the TDS, because I use it for the trim. And I don't know how to give the Rotators to another function in FC and also in the X52 profiler... :cry: (It seems it cannot be; the option to add the Rotators to the appropiate shortcuts is not a solution for me) Thanks for help.

No, actually I just made it for myself; I have no experience/knowledge how to use/put it into LO.

Thanks guys, glad you like it! Aahmm, actuallllly, I... I didn't plan to implement it, I just want it for an animation for myself. :) Which doesn't mean it cannot be implement into dcs but I don't know how does it work (and also I'm not interested in it, I still play with fc1.1 with default ones, and satisfied with that :) using only some terrain mods). And perhaps the model needs some revision for the game. And I don't know how to optimize it... :huh: As I said I just started this modelling thing I'm not an 3D game engineer/modeller. :)

Hi, I just started 3d modelling two months ago, so do not expect professional quality... :)

Great! Thanks!

I play nowadays the good-old LOMAC 1.02 on W7x64 but I planning to buy FC1. I read many places that FC1 has problems with W7 (starforce protection?) and cannot be run on it... Can someone or ED confirm: is FC1 run on W7x64 systems without any problems? Thanks. (And no, I don't want to buy FC2 at the moment, actually, LOMAC1.02 is still good for me, but perhaps the FC1 would be better)

Aahm, I see, thanks. Hopely, someday ED will integrate the proper code into BS...

Hey guys, until now(adays) I used to TouchPal via mouseclick but now I've changed to keyboard commands and recognized that TP's UV26 panel not synced (I mean no change on TP's screen) to to "real" cockpit when I click on the appropriate buttons on my keyboard (actually on my stick, but it doesn't matter). Am I the only one who experience this or is it a known issue?

Hey! I've just got an X52, and just fall into a very new experience... :lol: And tricking with the 2 trigger thing is definitely interesting for me. I'm trying to make what you said - using different rate - but I cannot able to figure out how to do this. I tried with macros (at first; C-LShift -> Space -> C-LShift for the first trigger, but stucked with the second trigger... :( ) without success. What's the trick? Is it possible to program SST to make this act? Thanks

-

Hi, is LOVP 1.3 works with the 'original' LOMAC? (1.02, not FCxx.xx) I just started now to learn and play with LOMAC and wanted to try also LOVP, but it doesn't connects to LOMAC. I have copied the export/config.lua files into Config/Export folders. No network, LOVP and LOMAC is on the same pc. Thanks for answering. Edit: I'm on 7.

Yeah, I started without labels. I just turned it on nowadays (last 1-2 missions) after my stupid "accident"... :-) But you're right, have to pay more attention onto briefing.

Hi, is it possible to turn on ONLY the friendly labels? Sometimes I ran accidentally to shot my sides :idiot:, and it's not a big proud... :smilewink: But to see enemies' labels is funny for me. (Not really realistic, you know :hmm: ) THX

Hmm. My "vertical" setup is working perfectly, I didn't recognize any fps drop vs to the horizontal setup. (Okay, my screens are based on only ~1280 res, so I have less pixels than your config.) The game runs smoothly, no problems at all (even if I don't have a "massive" hw...). Unfortunately I don't have any helpful idea what you should do with it... :-S Maybe some DCS guru has.

Hey guys, you have to configure your 2 monitors setup for a "vertical" placement. So your full width resolution must be only the main screen's pixel number! And reconfigure your lua files as it would be the second screen is _below_ the main screen and move your 2nd screen virtually under the main screen in your Windows video options.

Yeeeaaarrrggghh! Now it's perfectly set up, everything work fine! Thanks guys! :notworthy:

Hmm. And you configure all the settings (monitor setup lua etc.) as the secondary is below the main screen? (Like: Width: 1280, but the height is 1024*2, and set abris/shkval coordinates to the proper (in this case to bottom) position?)

Hey DCS/TouchPal/Multimonitor users/gurus! How did you solve the following problem; I have set up my two monitors, placed and running everyting fine except one thing: the text messages. (My config is: main/cockpit screen phisically on the right, and TP on the left - in the software setup it is reversed but I use in this way because of comfortability but it doesn't matter.) As we know, on a multimonitor setup we have to increase the width (and height) for the proper screen resolution. But this occurs that the message box "slides away" (actually in this case to the right) from the main/center screen it is not "ended" on the right side if the cockpit screen, it is flow to the right screen. The trouble with it that TP is "over" DCS, so the texts are hidden. :huh: Is there an option to set the text box border or something? Thanks

Hey DCS/TouchPal/Multimonitor users/gurus! How did you solve the following problem; I have set up my two monitors, placed and running everyting fine except one thing: the text messages. (My config is: main/cockpit screen phisically on the right, and TP on the left - in the software setup it is reversed but I use in this way because of comfortability but it doesn't matter.) As we know, on a multimonitor setup we have to increase the width (and height) for the proper screen resolution. But this occurs that the message box "slides away" (actually in this case to the right) from the main/center screen it is not "ended" on the right side if the cockpit screen, it is flow to the right screen. The trouble with it that TP is "over" DCS, so the texts are hidden. :huh: Is there an option to set the text box border or something? Thanks

Baaaahh.... :doh: Thanks. So, configured fine, screens set up. But TouchPal's buttons are not reacting, except the View buttons on the bottom left. If I press the shkval button on the top of the abris, shkval screen appears, so it's okay, but abris is black. Doesn't matter if I press anything around there. :huh:

Hi, earlier (when TouchPal "announced" :) ) I have tried to make it to work, but I have trouble with it (shkval and abris didn't appeared on it, just a pink/black region). I gave up, it wasn't working, tried lots of things, but no effect. I was on XPSP3. Now, my OS was changed, I'm on W7x64. I thought, I will give it another chance. But. :cry: I setup everything, and wanted to run touchpal.exe and whoops> Description: Stopped working Problem signature: Problem Event Name: CLR20r3 Problem Signature 01: touchpal.exe Problem Signature 02: 0.0.0.0 Problem Signature 03: 4acffdab Problem Signature 04: mscorlib Problem Signature 05: 2.0.0.0 Problem Signature 06: 4a27471d Problem Signature 07: 349e Problem Signature 08: e1 Problem Signature 09: System.IO.FileNotFoundException OS Version: 6.1.7600.2.0.0.256.48 Locale ID: 1033 I have no UAC etc, tried to run in admin mode. Whats wrong? Thanks in advance!

I said it earlier few times, but I have to repeat myself; this forum is definitely one of the best (if not The Best)! :thumbup: Absolutely fast and helpful. Super users... :) Thanks guys!