Bog9y

Ok, I found a settings that seems to be OK for me with a 5 cm extension and full force. Spring enabled and at 100% Damper enabled and at 23% Inertia disabled Friction enabled and at 2% Deadzone enabled and at 2% I can be much more accurate with these settings and the pitch power couple that i experienced seems to be better too for some reason.

Yeh, I think that is probably best. Mess with the settings until I find something im happy with. I really ought to just change 1 setting at a time and see the difference.

Ah , that's a shame, was hoping you had found the magical setting for the Phantom. I initially didn't use any friction or inertia and only 30% on the damper. But I found that jet was very unstable in pitch. Adding a bit of friction solved that problem to a degree but now it feels like the stick is too stiff. I need to have another play with it to perfect it.

Hi Hiob, do you still use these settings? And is your FFB gain in the DCS special options still set to 150%

Hi Super Grover, did you get a Rhino in the end?

Agree

Hi Ugra, thanks for this fantastic map and I'm looking forward to the expansion. Whilst playing I noticed that the terrain east of Spandahlem seems to be too high, it makes a standard ILS glideslope profile too close to the terrain. Upon further investigation I noticed that the elevation actually isn't quite correct. I think in DCS it's around 970 ft but it should be 1128 ft at the 05 threshold and 1197 ft at the 23 threshold. See here: https://skyvector.com/airport/ETAD/Spangdahlem-Airport From what I've seen on videos and pictures Spang seems to be on a plateau with 2 valleys (east and west) whereas in DCS it seems to be in a valley with high Terrain around it. If you go in MSFS2020 or 2024 you can see what I mean.

I agree , was just looking to see if it has been reported but I think the elevation of Spang in DCS is not correct and the terrain east of the base seems too high

Awesome!!!! Thank you

This one is good, a bit old but still better than nothing https://www.mil-airfields.de/approach-charts/de-germany/aerodromes.html

Thanks for the reply. That's it? That's not bad at all! I was expecting a long list of missing system implementations or functions. It just goes to show how good Heatblur are.

Hi guys, Just wondering, is there a list which states missing features/systems or if a system works differently to the real thing due to DCS limitations? For example, do ALL of the BITs work on the master test switch as per the real NATOPS or are some missing , or work a bit differently due to DCS limitations? Many thanks, Boggy

SOLD!!! Selling a ZOTAC AMP HOLO 3080TI graphics card. Bought in June 2021 for €1900 , selling for €450 plus shipping from Toulouse, France. Alternatively, I can ship from the UK to reduce costs for British buyers. Never overclocked, undervolted or used for mining. Comes with the original box with all accessories. I will be listing my 850 watt PSU soon too. Dimensions are 317.8mm x 131.8mm x 64.6mm. Specs: Processeur GraphiqueGeForce RTX 3080 Ti Cœurs CUDA10240 Mémoire Vidéo12GB GDDR6X Bus Mémoire384-bit Fréquence Processeur GraphiqueBoost: 1710 MHz Fréquence Mémoire19 Gbps PCI Express4.0 16x Sorties Vidéos3 x DisplayPort 1.4a (up to 7680x4320@60Hz) HDMI 2.1* (up to 7680x4320@60Hz) *Ultra High Speed HDMI Cable is required to support 8K/60FPS or 4K/120FPS Support HDCP2.3 Support Multi EcransQuad Display Alimentation conseillée750W Consommation350W Connecteurs d'Alimentation2 x 8-pin DirectX12 Ultimate OpenGL4.6 RefroidissementIceStorm 2.0 Largeur ( Equerre )3 slot SLINot Supported Système(s) d'Exploitation Compatible(s)Windows 10 64-bit (build 2004 or later) Longueur317.8mm x 131.8mm x 64.6mm / 12.5" x 5.2" x 2.5" Accessories2 x Dual 6-pin to 8-pin cable Manual

Yep, I have the exact same problem. Unless you hit the target nothing will happen. This is not how cluster munition works, it should cover an area and cause at least some damage.

Try to message IronMike in their Discord channel maybe?