VooDoo8-9

Would it be realistic for the Navy to operate in the Caucuses region ? Looking at a map reveals a straight that may grant access to the area, in the south near Istanbul. ? Further study revals several bridges, none of which look tall enough to allow a carrier through. but I don't know for sure....anyone have a clue ?

With that one line of code ?

The problem is, i cannot locate the file i need to edit

Hello everyone, I recently upgraded from the Vive Pro to a HP Reverb and am experiencing a strange cross eyed feeling ! I have seen posts that discuss people having the same issue, but i cannot locate the autoexec.cfg that the say you have to edit to get it to fix itself...I have the Steam version and am running the open beta.

Where is this file located in the Steam version ? I cannot locate it...

It sounds like transmission from the actual event. Keep in mind it is a recreation . Wish we had more like it in game though

When designing missions where Iran is the hostile, how do you realistically portray the threat that Iran presents ? A/A , SAM, naval assets ? What is a good make-up for Iran's current capability ? I ran across a SAM map a while back but have since lost it.

I am happy to report that due to the immense support from the community I was able to get them to work! However, it REQUIRED a re-install of the F-18 module. A sanity check was suggested, and proved that the .lua files would work with F-16 and A-10, indicating a problem with the F-18 module. I reccommend trying to "reset" the module, asI had got it as soon as it came out, and it seems something fundamentally changed. Just a tip to try! Fly safe, and if you can't be safe, be dangerous!

I would like to find a mod for it

Unfortunately it didn't work....you can see the crosshair for selecting things in the cockpit, put the DDI displays don't show up.

Man that's neat

Was reading the wikipedia article on this group and man do they have some awesome squadron names! Also a pretty decent read, if your'e into that kind of thing. https://en.wikipedia.org/wiki/Marine_Aircraft_Group_11

There is a poster of a bug belonging to VMFA 312 that has a very neat digi-cam paint job floating around on the internet. Is this a legit paint job or just something photo shopped ? Is there a mod to add it to the game? The description sounds like it is real . See the following link : https://fstudiosweb.com/f-18c-hornet-vmfa-314-fine-art-profile-prints/parchment

Wow! I am at work and will try it as soon as I get home ! I am very excited to see if it works! I will keep you posted. Helpful people like you are what keep communities like this going, and I thank you for taking time to come up with this!!

Thanks for reaching out to me! I didn't realize the forum doesnt automatically let you know when so.eone replies to your thread. I really insist on some form of payment for the help! I will PM both of y'all later today! Thanks again!

Thanks, I will post there also. I am really wanting to get these MFDs to work!

PREAMBLE : Good morning everyone, I'm new to the forums, but have lurked for a while. I have been playing DCS for a while and own several of the modules and have pre-ordered the supercarrier. Recently I have taken up getting better peripherals including TM Warthog Throttle/Grip (now upgraded to F/A-18 Grip), MFG pedals, modified Playseat AirForce, Vive Pro (currently on the shelf gathering dust, Cougar MFDs w/ 8" non-touch LCDs, TrackIR, Streamdeck -XL as a multifunction button box. THE OBJECTIVE : I tried following several online guides and tutorials on how to get the LCD screens to show the information from the left and right MFDs (F/A-18 ) , several times I got close but I could never get over the last hurdle of making it actually work fully. The closest I cam to it showing up was being able to see the little yellow cross used when turning knobs or pushing buttons in the cockpit. THE SETUP : One primary 50" (?) monitor set to 3840x2160 , to 8" (?) LCD screens set to 800x800. After reading through several posts, tutorials, and watching a couple out-dated videos, I have confused myself as to where the screens need to be set ( in Windows Display Settings), but this is how I have it . THE REQUEST : I am looking to commission the creation of a working .LUA file that will allow the export of left and right MFD for the F/A-18 Module. Working with code is not a skill I possess, and will gladly pay for the expertise that someone on this forum must have. Having tried messing with it I can see the difficulty and complication involved and will gladly pay to have the file made. This is skilled work, with time and knowledge involved, and after devoting 12 hours to trying to figure it out and deep personal inflection, they are skills I don't have THE PAY : PayPal , electronic transfer, etc. Will be discussed privately with whoever is going to write the .LUA. , to be determined by the file author

PREAMBLE : Good morning everyone, I'm new to the forums, but have lurked for a while. I have been playing DCS for a while and own several of the modules and have pre-ordered the supercarrier. Recently I have taken up getting better peripherals including TM Warthog Throttle/Grip (now upgraded to F/A-18 Grip), MFG pedals, modified Playseat AirForce, Vive Pro (currently on the shelf gathering dust, Cougar MFDs w/ 8" non-touch LCDs, TrackIR, Streamdeck -XL as a multifunction button box. THE OBJECTIVE : I tried following several online guides and tutorials on how to get the LCD screens to show the information from the left and right MFDs (F/A-18 ) , several times I got close but I could never get over the last hurdle of making it actually work fully. The closest I cam to it showing up was being able to see the little yellow cross used when turning knobs or pushing buttons in the cockpit. THE SETUP : One primary 50" (?) monitor set to 3840x2160 , to 8" (?) LCD screens set to 800x800. After reading through several posts, tutorials, and watching a couple out-dated videos, I have confused myself as to where the screens need to be set ( in Windows Display Settings), but this is how I have it . THE REQUEST : I am looking to commission the creation of a working .LUA file that will allow the export of left and right MFD for the F/A-18 Module. Working with code is not a skill I possess, and will gladly pay for the expertise that someone on this forum must have. Having tried messing with it I can see the difficulty and complication involved and will gladly pay to have the file made. This is skilled work, with time and knowledge involved, and after devoting 12 hours to trying to figure it out and deep personal inflection, they are skills I don't have THE PAY : PayPal , electronic transfer, etc. Will be discussed privately with whoever is going to write the .LUA.

PREAMBLE : Good morning everyone, I'm new to the forums, but have lurked for a while. I have been playing DCS for a while and own several of the modules and have pre-ordered the supercarrier. Recently I have taken up getting better peripherals including TM Warthog Throttle/Grip (now upgraded to F/A-18 Grip), MFG pedals, modified Playseat AirForce, Vive Pro (currently on the shelf gathering dust, Cougar MFDs w/ 8" non-touch LCDs, TrackIR, Streamdeck -XL as a multifunction button box. THE OBJECTIVE : I tried following several online guides and tutorials on how to get the LCD screens to show the information from the left and right MFDs (F/A-18 ) , several times I got close but I could never get over the last hurdle of making it actually work fully. The closest I cam to it showing up was being able to see the little yellow cross used when turning knobs or pushing buttons in the cockpit. THE SETUP : One primary 50" (?) monitor set to 3840x2160 , to 8" (?) LCD screens set to 800x800. After reading through several posts, tutorials, and watching a couple out-dated videos, I have confused myself as to where the screens need to be set ( in Windows Display Settings), but this is how I have it . THE REQUEST : I am looking to commission the creation of a working .LUA file that will allow the export of left and right MFD for the F/A-18 Module. Working with code is not a skill I possess, and will gladly pay for the expertise that someone on this forum must have. Having tried messing with it I can see the difficulty and complication involved and will gladly pay to have the file made. This is skilled work, with time and knowledge involved, and after devoting 12 hours to trying to figure it out and deep personal inflection, they are skills I don't have THE PAY : PayPal , electronic transfer, etc. Will be discussed privately with whoever is going to write the .LUA. The file writer can determine what is fair.

Will you ship tp the US? I am interested.

Accuracy via volume!

PREAMBLE : Good morning everyone, I'm new to the forums, but have lurked for a while. I have been playing DCS for a while and own several of the modules and have pre-ordered the supercarrier. Recently I have taken up getting better peripherals including TM Warthog Throttle/Grip (now upgraded to F/A-18 Grip), MFG pedals, modified Playseat AirForce, Vive Pro (currently on the shelf gathering dust, Cougar MFDs w/ 8" non-touch LCDs, TrackIR, Streamdeck -XL as a multifunction button box. THE OBJECTIVE : I tried following several online guides and tutorials on how to get the LCD screens to show the information from the left and right MFDs (F/A-18 ) , several times I got close but I could never get over the last hurdle of making it actually work fully. The closest I cam to it showing up was being able to see the little yellow cross used when turning knobs or pushing buttons in the cockpit. THE SETUP : One primary 50" (?) monitor set to 3840x2160 , to 8" (?) LCD screens set to 800x800. After reading through several posts, tutorials, and watching a couple out-dated videos, I have confused myself as to where the screens need to be set ( in Windows Display Settings), but this is how I have it . THE REQUEST : I am looking to commission the creation of a working .LUA file that will allow the export of left and right MFD for the F/A-18 Module. Working with code is not a skill I possess, and will gladly pay for the expertise that someone on this forum must have. Having tried messing with it I can see the difficulty and complication involved and will gladly pay to have the file made. This is skilled work, with time and knowledge involved, and after devoting 12 hours to trying to figure it out and deep personal inflection, they are skills I don't have :helpsmilie: THE PAY : PayPal , electronic transfer, etc. Will be discussed privately with whoever is going to write the .LUA.