[DCSISSUE] BK-90 approach altitude isn't selectable

According to the both releases of the AJS 37 manual, the approach altitude of BK-90s can be selected using TAKT Input 91XXX0, where XXX is the altitude in meters. The following video shows that regardless of what that setting is, the dispensers approach the target at the same height as they do by default, 400 feet. (However, the area of effect pattern is programmable with 92X000.)

For comparison, here is a video of the same mission, with no TAKT inputs. Interestingly, the approach altitude of the dispensers seems to be 400 ft, despite the manual saying it is 60m (about 200 ft).

Yes since the Bk90 was updated a while ago this feature is no longer available.

Yes since the Bk90 was updated a while ago this feature is no longer available.

Is it supposed to come back or will it stay like this?

Yes since the Bk90 was updated a while ago this feature is no longer available.

Should it be removed from the manual, then? Or as QuiGon asked, are there plans for it to return?

Should it be removed from the manual, then? Or as QuiGon asked, are there plans for it to return?

It should definitely get removed from the manual if it doesn't come back, as it would only cause confusion.

I've added a comment regarding this matter in the RC2 manual review.