Jump to content

Recommended Posts

Posted (edited)

When mapping the second pilot emergency release and explode switches to controllers, I noticed that pressing one activates the other. This is also true of the switch guards, and with both keyboard and joystick mapping.

 

The pilot's side mapping is ok; the problem is only in the right seat.

Edited by Home Fries
  • 2 months later...
Posted

What exactly are those commands for & what do they do, pilot emergency release/explode???

i7 8700k@4.7, 1080ti, DDR4 32GB, 2x SSD , HD 2TB, W10, ASUS 27", TrackIr5, TMWH, X-56, GProR.

  • 8 months later...
Posted
Issue is still present in 1.2.14. Copilot switch cover iCommands are reversed, and the release switch is still unresponsive with keyboard/joystick. Explode switch works fine.

Could you please specify exactly what you think is wrong in 1.2.14 and how I can replicate it?

It seems to work fine here, but I was testing with a slightly updated build.

1338 - beyond leet

ED Forum rules EN|DE|RU

Posted (edited)
Could you please specify exactly what you think is wrong in 1.2.14 and how I can replicate it?

It seems to work fine here, but I was testing with a slightly updated build.

Thanks for the quick reply. Here's how to replicate the test state:

 

Assign the following iCommands to joystick buttons (I used my MFD):

 

  • Second Pilot Emergency Explode
  • Second Pilot Emergency Explode Cover
  • Second Pilot Emergency Release
  • Second Pilot Emergency Release Cover

Note: you can also use the key commands for full range of testing.

 

 

Next, go to the copilot station and monitor the armament panel while pressing the buttons.

 

What I see:

 

  1. Press Second Pilot Emergency Explode Cover - Release Cover is toggled
  2. Press Second Pilot Emergency Release Cover - Explode Cover is toggled
  3. Press Second Pilot Emergency Explode - Explode switch toggled (correct response)
  4. Press Second Pilot Emergency Release - no response

Hope this helps.

Edited by Home Fries
Posted
Thanks for the quick reply. Here's how to replicate the test state:

 

Assign the following iCommands to joystick buttons (I used my MFD):

 

  • Second Pilot Emergency Explode
  • Second Pilot Emergency Explode Cover
  • Second Pilot Emergency Release
  • Second Pilot Emergency Release Cover

Note: you can also use the key commands for full range of testing.

 

 

Next, go to the copilot station and monitor the armament panel while pressing the buttons.

 

What I see:

 

  1. Press Second Pilot Emergency Explode Cover - Release Cover is toggled
  2. Press Second Pilot Emergency Release Cover - Explode Cover is toggled
  3. Press Second Pilot Emergency Explode - Explode switch toggled (correct response)
  4. Press Second Pilot Emergency Release - no response

Hope this helps.

Replicated. Will see if there is already a ticket for it. If not, I will create one.

 

Thanks for your help! :thumbup:

1338 - beyond leet

ED Forum rules EN|DE|RU

  • 1 month later...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...