Jump to content

Recommended Posts

Posted

Hi! I just install DCS. I have problem with rolling the plane and I uploaded on youtube so you know what I mean.

 

1. I went to device setting for my joystick. There are no problem.

2. I unplugged joystick and test on keyboard and has the same problem.

3. Once a while I open DCS the rolling is fine. (no known why). But mostly has problem.

 

 

And the second issue is I try to adjust the trim but trim has no result.( in any directions)

 

Can anyone help please?

Posted

I can't see much wrong in your vid but you seem rough with the controls.

If your stick is doing odd things it probly means you have another control plugged in that is conflicting with ya stick.

Not sure how new you are to DCS but make sure you go to DCS options,controls and set ya trim controls there and everything else.

If you have no space left on ya stick for trimming just put them on ya key board arrows to make sure they work.

Posted

Your rolling looks fine. You were to rough at pulling backwards (pitch), the Su-25T is like a flying tank, heavy and not very maneuvrabel.

 

It needs some time for the aircraft to change the flight path to the direction your nose is pointing. The angle between there is the AoA (angle of attack). It was to high thats the reason of the "beeeep beeep" sound to appear.

Posted (edited)

looks like keyboard is being used rather than a joystick! What stick are you using? Have you set any curves on the axis? As setting curves the wrong way could lead to near instant full control deflection.

 

Just had another thought. Try applying full left right up down on the stick before flight. As occasionally I find my calibration is lost if the joystick has been unplugged. So it sees any deflection as full deflection.

Edited by Random
Posted

go to your Options/ controls panel, select the plane and from there hit the AXIS section from the pull down... delete the listed assignments (for joystick/ throttle/ rudder pedals), then re-assign.

 

 

see how that goes

City Hall is easier to fight, than a boys' club - an observation :P

"Resort is had to ridicule only when reason is against us." - Jefferson

"Give a group of potheads a bunch of weed and nothing to smoke out of, and they'll quickly turn into engineers... its simply amazing."

EVGA X99 FTW, EVGA GTX980Ti FTW, i7 5930K, 16Gb Corsair Dominator 2666Hz, Windows 7 Ultimate 64Bit, Intel 520 SSD x 2, Samsung PX2370 monitor and all the other toys

-

"I am a leaf on the wind, watch how I soar"

Posted

Do you own any other game that you can use with the joystick without problems ?

Maybe download/install one of those free to play things and try there to cross-check.

If you have the same issue there then you should de- + reinstall any Joystick software

and check again. If it still is present your sticks potentiometers may need some cleaning

to stop the spiking. This is explained somewhere in this forum, please use the search function.

 

Apart from that, yes, the Su-25T does not want to be tossed around like an F-16.

You will get the feeling for her but it takes time to accept that she needs time also..LoL

Gigabyte Aorus X570S Master - Ryzen 5900X - Gskill 64GB 3200/CL14@3600/CL14 - Sapphire  Nitro+ 7800XT - 4x Samsung 980Pro 1TB - 1x Samsung 870 Evo 1TB - 1x SanDisc 120GB SSD - Heatkiller IV - MoRa3-360LT@9x120mm Noctua F12 - Corsair AXi-1200 - TiR5-Pro - Warthog Hotas - Saitek Combat Pedals - Asus XG27ACG QHD 180Hz - Corsair K70 RGB Pro - Win11 Pro/Linux - Phanteks Evolv-X 

Posted

I unplugged other usb. Now Joystick work. Thank You!

But trim still not work.

My joystick has 12 buttons. So I set 7,8,9,and 10 for trim and also arrow key as trim on keyboard too, still not work.

 

p.s. I just installed dcs. I'm totally new. Still training on Landing. ^_^

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...