Jump to content

Recommended Posts

Posted

Is there a keybind to press on the keyboard or controller that changes the radar distance? Under the axis command list, it's MFD Range. I remember there used to be a pair of buttons for it. It is not the scan zone up/down.

 

 

Not related: Is there a reason it's almost 50/50 on whether you can reload your plane without electrical power? Sometimes I turn power on, and I have no loadout still. Other times, I turn power on to see 2 or 3 of my 8 missiles loaded.

Owned: Ryzen 3900x, MSI AMD 470x mobo, 32gb 3200MHz ram, Gtx 1660 Ti, 970 Evo Plus 500GB, MsFFB2, TIR5, TMWH+18c Stick, MFG Crosswinds, Buttkicker/SSA, WinWing F-18C . Next is VR for simpit

Art Of The Kill:

Posted

The + and - keys do radar distance, but you can also just slew the cursor all the way to the top of the radar screen or all the way to the bottom and it will automatically change the range.

It only takes two things to fly, Airspeed and Money.

Posted

In my options, - annd = only affect zoom.

The numpad + and - are "thrust smoothly" up and down.

 

I have it bound to my warthog's slider by the L/G warn, but its the only control I need during engagements that I need to move my hand from my throttle. No bueno.

Owned: Ryzen 3900x, MSI AMD 470x mobo, 32gb 3200MHz ram, Gtx 1660 Ti, 970 Evo Plus 500GB, MsFFB2, TIR5, TMWH+18c Stick, MFG Crosswinds, Buttkicker/SSA, WinWing F-18C . Next is VR for simpit

Art Of The Kill:

Posted

It's under the "sensors" section in the key options. might be called MFD <range/zoom/something>

You need to unbind your axis though if you want to control it by keystrokes. The axis might flicker a little thus commanding the MFD back to the axis position.

So, unbind axis, bind keystrokes and you're good to go.:joystick:

[sIGPIC][/sIGPIC]

Win10 64, Asus Maximus VIII Formula, i5 6600K, Geforce 980 GTX Ti, 32 GB Ram, Samsung EVO SSD.

Posted

Perhaps I need to delete my controller profile then. but as you should see in the attached, I have no option within the "sensors" panel. The "scan zone increase/decrease" is changing the width of RWS from the narrow 30 to wide/normal 60 degree. Thank you.

Screen_141128_162526.thumb.jpg.78aefcb68e47ab0e2756fc7ff9cb94ee.jpg

Owned: Ryzen 3900x, MSI AMD 470x mobo, 32gb 3200MHz ram, Gtx 1660 Ti, 970 Evo Plus 500GB, MsFFB2, TIR5, TMWH+18c Stick, MFG Crosswinds, Buttkicker/SSA, WinWing F-18C . Next is VR for simpit

Art Of The Kill:

Posted

thanks guys. That was what I was looking for!

Owned: Ryzen 3900x, MSI AMD 470x mobo, 32gb 3200MHz ram, Gtx 1660 Ti, 970 Evo Plus 500GB, MsFFB2, TIR5, TMWH+18c Stick, MFG Crosswinds, Buttkicker/SSA, WinWing F-18C . Next is VR for simpit

Art Of The Kill:

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...