Jump to content

UltraMFCD - drag, resize and click display exports. Zero configuration.


Recommended Posts

  • Replies 864
  • Created
  • Last Reply

Top Posters In This Topic

Posted (edited)

Absolutely. I have a policy of attempting not to tread on the toes of other mods (f.ex uMFCD works alongside Helios and DCS Bios), but haven't got around to testing uMFCD with Kneeboard Builder yet. The rationale behind releasing a kneeboard module was that uMFCD caused the standard kneeboard to disappear completely, as Rivvern would remind me at every opportunity. :)

 

Should be no problem... I assume you are aware of this: http://forums.eagle.ru/showthread.php?t=129341

(kneeboard builder windows app) works flawlessly...

Edited by Sgt_Baker

UltraMFCD 3.0 in the works.

 

https://ultramfcd.com

Posted

Hi, I have a question. Did not go through the entire thread, so I aplogize if that has been asked before.

 

Right now, for the A-10C, I use the following setup:

3 monitors to display the main game window, plus a 4th USB screen that holds my MFD, RWR and clock exports via Helios. Works like a charm, but the downside is that in order to make the display exports to work, the game has to render the screen size of all 4 screens, not just the 3 main screens.

 

My question is this, using UltraMDCD, I could then render only on the 3 main screens, correct? Before I go through setting it all up, did anyone compare it on a similar monitor setup and could tell me if I could expect a noticeable performance increase using UltraMFCD?

Posted (edited)

Firstly, yes, the optimal solution is exactly that you're suggesting: DCS on three screens and displays on whatever else is connected. You should experience an increase in FPS as a result.

 

However, the USB screen might be your undoing for the following reason:

 

USB screens tend not to be hardware accelerated. UltraMFCD is 100% DirectX and operates a bandwidth of appx. 4Gb/s when running at full-whack (both MFCDs at full size), which is significantly more than can be crammed through a USB port. Some users have reported issues, others say everything works fine, so I suppose it depends on the USB screen in question.

 

That said, you can adjust both the size and FPS of UltraMFCD's displays in real-time should you run in to issues.

 

Please let me know how you get along, as this (USB displays) is an active field of interest at the moment.

 

Regards,

 

Baker

 

Hi, I have a question. Did not go through the entire thread, so I aplogize if that has been asked before.

 

Right now, for the A-10C, I use the following setup:

3 monitors to display the main game window, plus a 4th USB screen that holds my MFD, RWR and clock exports via Helios. Works like a charm, but the downside is that in order to make the display exports to work, the game has to render the screen size of all 4 screens, not just the 3 main screens.

 

My question is this, using UltraMDCD, I could then render only on the 3 main screens, correct? Before I go through setting it all up, did anyone compare it on a similar monitor setup and could tell me if I could expect a noticeable performance increase using UltraMFCD?

Edited by Sgt_Baker

UltraMFCD 3.0 in the works.

 

https://ultramfcd.com

Posted

so I tested, it looks like a great program and exactly what I was looking for, but it doesnt work on my system unfortunately. FPS go from 65 to 30 and I have like 20 seconds delay on the exports. I also unplugged my USB monitor, same thing. Guess its not compatible with some components. Im running 2x GTX970 in SLI in case that helps.

Posted (edited)

Are you running nVidia's latest drivers, perchance?

 

See "nVidia's latest graphics drivers (352.86) cause extreme lag/low FPS for exported displays. The problem with this particular driver set has been noticed to manifest with a number of games, not solely UltraMFCD. We will be monitoring the situation closely. If this issue affects you, rolling back to the previous driver (347.52) will resolve the problem until nVidia releases a patch for the latest driver." from ultramfcd.com

 

:)

 

so I tested, it looks like a great program and exactly what I was looking for, but it doesnt work on my system unfortunately. FPS go from 65 to 30 and I have like 20 seconds delay on the exports. I also unplugged my USB monitor, same thing. Guess its not compatible with some components. Im running 2x GTX970 in SLI in case that helps.
Edited by Sgt_Baker

UltraMFCD 3.0 in the works.

 

https://ultramfcd.com

Posted
Yeah I recently updates. Will roll back and try again :)

 

No idea why those drivers are borked. uMFCD is 100% textbook DirectX 3D, so why????

 

History: Way back in the past, Rick Rashid decided to engage in a personal project with a view to learning DirectX. What resulted was ultimately Microsoft Allegiance, and once source-released, FreeAllegiance. Having grown through FreeAllegiance, and implementing their ranking system, UltraMFCD was my re-learning DirectX.

UltraMFCD 3.0 in the works.

 

https://ultramfcd.com

Posted

amazing. I rolled back the drivers and the FPS issue is completely gone. :O

 

So far so good, but the exports still dont work. They worked when I started the program for the very first time. Then I pulled the plug on the USB screen to see if that helps with FPS and since then I get only black screens on the MFD export windows. When I resize a few times, sometimes I get a static image back, but it wont display what the actual displays are showing. I deleted the downloaded folder and re-extracted the files again but the problem persists. I assume there is a bad config file in my system now, any easy way to fix it? Where does the program store the window positions? maybe a clean config file can help?

I also pushed the reset all button, but that doesnt help

Posted

diagnostics package

 

 

---BEGIN DIAGNOSTICS PACKAGE---

FukHe+V9qPWCQ7gKPYhWf/WkHOtjHNLB83pOx8+DAXaL1fas5PN/hw4BkkeaVSwkDAXKH44zO2smZEcQ3+2vd9AiWOqsci1W33VBjXSSZOPd/I/Jad17Y6yepwVAvOf6FCCU3jI2WOnAbZeCyjPopDPaRkfiOCMfFptUfCUbT+iYJ5d8gxUWnrsW0a7X/Qx/0Ov668snE+2+yzE54TU5TMBSOhK9BUETIKjGrP+r5LVqzyL+4wvk6quzJm6qttFj8rQW4rZBosDpkjEkQJCAUmNqdSAGtrCY5s0MgW8UU4vEGRjrDfUXzVFioxmtdpdEJ0+Mcyg6vAdBnJaACYCAEA==

---START PAYLOAD---

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

---END DIAGNOSTICS PACKAGE---

 

Posted

Everything is OK until the USB screen is introduced? Isn't that indicative of the problem at large?

 

amazing. I rolled back the drivers and the FPS issue is completely gone. :O

 

So far so good, but the exports still dont work. They worked when I started the program for the very first time. Then I pulled the plug on the USB screen to see if that helps with FPS and since then I get only black screens on the MFD export windows. When I resize a few times, sometimes I get a static image back, but it wont display what the actual displays are showing. I deleted the downloaded folder and re-extracted the files again but the problem persists. I assume there is a bad config file in my system now, any easy way to fix it? Where does the program store the window positions? maybe a clean config file can help?

I also pushed the reset all button, but that doesnt help

UltraMFCD 3.0 in the works.

 

https://ultramfcd.com

Posted

I know your program works because everything was ok when I started it for the first time except fps were bad. I then simply pulled the plug and disconnected the usb screen to see whether the fps go up again. From then on no matter if I start with or without usb screen the exports don't work. Only the fps hit got better when I rolled back gfx card drivers. Again where does your program store its window positions? It's not a file in the program directory since a re download does not fix the problem

Posted

Hey there.

 

I don't need any tech support because my PC can barely run this program with any acceptable FPS , but i just want to point out an issue i had during my short time using this product.

 

When i click to drag a screen somewhere else , it rezised on its own. It instantly gets like 10 to 20% smaller. (No , i'm not dragging the corners.)

 

This happens every single time i drag one of the screens. I'm a complete moron when it comes to tech stuff like this but all i can tell you is that i run 2 screens , one at 1920x1080(1080i) and one at 1920x1200. This is the only thing i can think of that could have anything to do with it.

 

Again , i don't personally need any support for this issue , but maybe pointing it out can help other people down the road.

 

Regards

 

Once i get a better system i will start using/buy this product immediately , it's a life saver for people like me.

Posted

That's really weird. Which version of Windows are you running?

 

 

Hey there.

 

I don't need any tech support because my PC can barely run this program with any acceptable FPS , but i just want to point out an issue i had during my short time using this product.

 

When i click to drag a screen somewhere else , it rezised on its own. It instantly gets like 10 to 20% smaller. (No , i'm not dragging the corners.)

 

This happens every single time i drag one of the screens. I'm a complete moron when it comes to tech stuff like this but all i can tell you is that i run 2 screens , one at 1920x1080(1080i) and one at 1920x1200. This is the only thing i can think of that could have anything to do with it.

 

Again , i don't personally need any support for this issue , but maybe pointing it out can help other people down the road.

 

Regards

 

Once i get a better system i will start using/buy this product immediately , it's a life saver for people like me.

UltraMFCD 3.0 in the works.

 

https://ultramfcd.com

Posted

UltraMFCD, in accordance with "how MS wants these things to be done" stores your settings in the Users directory - specifically:

C:\Users\<your Usernam>\AppData\Local\fe23\UltraMFCD.exe_StrongName_t3dncvaehh3oz0zfljdnyzwpfqbexf4k\<version>\user.config

 

However, there's a much simpler method for resetting everything. Simply click the "Reset All" button from the settings screen. :)

 

SettingsUI4.png

 

I know your program works because everything was ok when I started it for the first time except fps were bad. I then simply pulled the plug and disconnected the usb screen to see whether the fps go up again. From then on no matter if I start with or without usb screen the exports don't work. Only the fps hit got better when I rolled back gfx card drivers. Again where does your program store its window positions? It's not a file in the program directory since a re download does not fix the problem

UltraMFCD 3.0 in the works.

 

https://ultramfcd.com

Posted

as I said, I did that but it doesnt help. One thing Im confused about. I start up the program and under settings, I basically disabled all exports but the MFDs. Then the problems started, as outlined above, and I simply deleted the entire folder where your program was extracted to. I re-downloaded and executed the program, yet all settings remined (as in, all exports disabled but the mfds). I click 'reset all' and restart the program, but the settings remain. From this I conclude that the reset all does not infact wipe all settings. Im pretty sure my problem with the program is just a bad config file stored somewhere.

 

I will try your suggestion and simply wipe the entire folder (under app data etc) and see if that does the trick

Posted (edited)

Ah, right. I have discovered a bug whereby uMFCD would attempt to upgrade settings from a previous version after a reset. If said prior user.config contained invalid display positions, there's every possibility that they would have been carried over.

 

Counter-intuitively, it would appear that hitting Reset All while uMFCD is running should produce the intended result in real-time (which was an element of a large behind the scenes update a while back).

 

Additionally, uMFCD would immediately save the values of all the "visible" settings, which would lead to the impression that a hard reset of the file hadn't taken place. This behaviour has also now been fixed.

 

So, in the meantime, please try the following in order:

 

1. Hit "Reset All" while uMFCD is running and intercepting DCS.

 

2. If that fails, delete absolutely everything you find pertaining to UltraMFCD (all versions) under the path mentioned earlier.

 

If we're still no-go after performing the above, we'll have to investigate further.

 

Regards,

 

Baker

 

as I said, I did that but it doesnt help. One thing Im confused about. I start up the program and under settings, I basically disabled all exports but the MFDs. Then the problems started, as outlined above, and I simply deleted the entire folder where your program was extracted to. I re-downloaded and executed the program, yet all settings remined (as in, all exports disabled but the mfds). I click 'reset all' and restart the program, but the settings remain. From this I conclude that the reset all does not infact wipe all settings. Im pretty sure my problem with the program is just a bad config file stored somewhere.

 

I will try your suggestion and simply wipe the entire folder (under app data etc) and see if that does the trick

Edited by Sgt_Baker

UltraMFCD 3.0 in the works.

 

https://ultramfcd.com

Posted

I tried and deleted the folder you specified. That, in contrast to the reset all button did the trick. Now the exports work, but I have a 5 second delay between the actual cockpit instruments and the exports.

 

I tried first at full fps settings, which cause a 20 fps loss (Nvidia driver 9.18.13.5286) and 1/5 fps, which almost has no fps loss. The 5 sec input lag does not significantly change with fps settings.

 

All I can say at this point is that unfortunately your software does not like my system.

 

btw, after a restart of DCS, it went back to screwed up exports, notice how the clock is actually displayed on the MFD?

link to picture

 

 

 

20150615_170328444_iOS.jpg?dl=0

Posted

Yep. To use the Anglo-Saxon vernacular: That is ****ed up.

 

Have you installed any other mods/systems that might fundamentally affect the rendering pipeline?

 

I tried and deleted the folder you specified. That, in contrast to the reset all button did the trick. Now the exports work, but I have a 5 second delay between the actual cockpit instruments and the exports.

 

I tried first at full fps settings, which cause a 20 fps loss (Nvidia driver 9.18.13.5286) and 1/5 fps, which almost has no fps loss. The 5 sec input lag does not significantly change with fps settings.

 

All I can say at this point is that unfortunately your software does not like my system.

 

btw, after a restart of DCS, it went back to screwed up exports, notice how the clock is actually displayed on the MFD?

link to picture

 

 

 

20150615_170328444_iOS.jpg?dl=0

UltraMFCD 3.0 in the works.

 

https://ultramfcd.com

Posted

yeah Im out of luck now. For a test, I disabled everything. No USB monitor, removed surround and just used a single screen, disabled SLI and uninstalled ALL mods via JSGME.

 

good thing is, I get over 100 fps now lol. bad thing is, the crazy input lag persists. Must be something else on my system that interferes, but I cant think of anything tbh

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...