unknown Posted October 2, 2015 Posted October 2, 2015 (edited) This seems to affect only the Mig-21bis so far for me. After downloading the module i was assigning the axis and buttons for my Warthog HOTAS, everything worked including the Thrust-axis but after a restart of the game the thrust-axis doesn't work anymore. I tryed to reassign it but it doesn't work, the "Thrust-line" is marked red. Edit: Win 10 64bit i7 3770k at stock speed 16gb RAM Radeon HD7970 I used the Hotfix privided py LNS to get the module running. This problem doesn't occur with the "old/normal" DCS installation on the same PC. Edited October 2, 2015 by unknown Modules: KA-50, A-10C, FC3, UH-1H, MI-8MTV2, CA, MIG-21bis, FW-190D9, Bf-109K4, F-86F, MIG-15bis, M-2000C, SA342 Gazelle, AJS-37 Viggen, F/A-18C, F-14, C-101, FW-190A8, F-16C, F-5E, JF-17, SC, Mi-24P Hind, AH-64D Apache, Mirage F1, F-4E Phantom II System: Win 11 Pro 64bit, Ryzen 3800X, 32gb RAM DDR4-3200, PowerColor Radeon RX 6900XT Red Devil ,1 x Samsung SSD 970 EVO Plus 2TB NVMe, 2 x Samsung SSD 2TB + 1TB SATA, MFG Crosswind Rudder Pedals - VIRPIL T-50CM and VIRPIL MongoosT-50 Throttle - HP Reverg G2, using only the latest Open Beta, DCS settings
bart Posted October 2, 2015 Posted October 2, 2015 I have this same issue. Anyone else get this or is there a fix? System :- i7-12700K 3.6 GHz 12 core, ASUS ROG Strix Z690-A Gaming, 64GB Corsair Vengeance RGB Pro 3200MHz, 24GB Asus ROG Strix Geforce RTX 3090, 1x 500GB Samsung 980 PRO M.2, 1x 2TB Samsung 980 PRO M.2, Corsair 1000W RMx Series Modular 80 Plus Gold PSU, Windows 10. VIRPIL VPC WarBRD Base with HOTAS Warthog Stick and Warthog Throttle, VIRPIL ACE Interceptor Pedals, VIRPIL VPC Rotor TCS Plus Base with a Hawk-60 Grip, HP Reverb G2.
Art-J Posted October 2, 2015 Posted October 2, 2015 A few people got it, but the fix from the thread below worked fine for me: http://forums.eagle.ru/showthread.php?t=147925 i7 9700K @ stock speed, single GTX1070, 32 gigs of RAM, TH Warthog, MFG Crosswind, Win10.
unknown Posted October 2, 2015 Author Posted October 2, 2015 A few people got it, but the fix from the thread below worked fine for me: http://forums.eagle.ru/showthread.php?t=147925 Thank you very much, this workaround worked fine for me too. :thumbup: Modules: KA-50, A-10C, FC3, UH-1H, MI-8MTV2, CA, MIG-21bis, FW-190D9, Bf-109K4, F-86F, MIG-15bis, M-2000C, SA342 Gazelle, AJS-37 Viggen, F/A-18C, F-14, C-101, FW-190A8, F-16C, F-5E, JF-17, SC, Mi-24P Hind, AH-64D Apache, Mirage F1, F-4E Phantom II System: Win 11 Pro 64bit, Ryzen 3800X, 32gb RAM DDR4-3200, PowerColor Radeon RX 6900XT Red Devil ,1 x Samsung SSD 970 EVO Plus 2TB NVMe, 2 x Samsung SSD 2TB + 1TB SATA, MFG Crosswind Rudder Pedals - VIRPIL T-50CM and VIRPIL MongoosT-50 Throttle - HP Reverg G2, using only the latest Open Beta, DCS settings
bart Posted October 2, 2015 Posted October 2, 2015 A few people got it, but the fix from the thread below worked fine for me: http://forums.eagle.ru/showthread.php?t=147925 Thanks Art-J :thumbup: works great here too.... System :- i7-12700K 3.6 GHz 12 core, ASUS ROG Strix Z690-A Gaming, 64GB Corsair Vengeance RGB Pro 3200MHz, 24GB Asus ROG Strix Geforce RTX 3090, 1x 500GB Samsung 980 PRO M.2, 1x 2TB Samsung 980 PRO M.2, Corsair 1000W RMx Series Modular 80 Plus Gold PSU, Windows 10. VIRPIL VPC WarBRD Base with HOTAS Warthog Stick and Warthog Throttle, VIRPIL ACE Interceptor Pedals, VIRPIL VPC Rotor TCS Plus Base with a Hawk-60 Grip, HP Reverb G2.
Recommended Posts