Jump to content

Recommended Posts

Posted

Using 1.5 open beta

 

I have a short mission, scramble from the ramp to intercept a B52. So after the engine is running I flip the radar master switch to standby. Then taxi to the runway, short taxi and takeoff with a AB climb to 3000m. When I switch the radar on the CRT brightens but there is no TDC and no ground clutter return. So, is there is minimum warm up period and I somehow not allowing enough time to warm up?

 

Regarding the CO2, when I am on the runway the level still sits around 10. After takeoff and I retracted the gear that drops to about 3. After I land there is never enough left to pop the chute. Missing something here?

With the price of ammunition these days do not expect a warning shot.

Posted

1) There is a warmup period. The manual of the real thing says it's between 3.5-5 minutes, but I've never measured exactly how much time we need in our simulated plane.

 

2) Do You remember to flip the gear lever to neutral after retraction? If You forget about it, the compressed air will leak out and won't be available for popping the chute. Some guys have also been reporting an intermittent bug where the chute doesn't quite work on their computers, but the reason for it is unknown.

i7 9700K @ stock speed, single GTX1070, 32 gigs of RAM, TH Warthog, MFG Crosswind, Win10.

Posted

Yup, gear lever in the middle. I just read another thread that said only the keyboard command work now and that it's not 'p' anymore but 'c' so since I've been using a button on my hotas and when that did not work pressed 'p' I will have to retest this issue.

 

3 - 5 min sure makes me think I am to quick to switch it on then so will retest this again also with a longer warm up period.

 

Thanx for the input.

With the price of ammunition these days do not expect a warning shot.

Posted

 

Regarding the CO2, when I am on the runway the level still sits around 10. After takeoff and I retracted the gear that drops to about 3. After I land there is never enough left to pop the chute. Missing something here?

There's a possible bug with air consumption in 1.5. Ckeck this thread, from post #14.

Posted
1) ...The manual of the real thing says it's between 3.5-5 minutes, but I've never measured exactly how much time we need in our simulated plane...

 

And the manual of our sim says:" ...Normal warm up time takes 3 - 5 minutes after which it can be in stand-by mode for the next 35-40 minutes or used when needed. Overall longetivity in the ON mode is 20-25 minutes. So, only turn the radar on when you really need it; otherwise, put it in stand-by mode..."

 

But as you said, i've never measured it, too.

Modules: KA-50, A-10C, FC3, UH-1H, MI-8MTV2, CA, MIG-21bis, FW-190D9, Bf-109K4, F-86F, MIG-15bis, M-2000C, SA342 Gazelle, AJS-37 Viggen, F/A-18C, F-14, C-101, FW-190A8, F-16C, F-5E, JF-17, SC, Mi-24P Hind, AH-64D Apache, Mirage F1, F-4E Phantom II

System: Win 11 Pro 64bit, Ryzen 3800X, 32gb RAM DDR4-3200, PowerColor Radeon RX 6900XT Red Devil ,1 x Samsung SSD 970 EVO Plus 2TB NVMe, 2 x Samsung SSD 2TB + 1TB SATA, MFG Crosswind Rudder Pedals - VIRPIL T-50CM and VIRPIL MongoosT-50 Throttle - HP Reverg G2, using only the latest Open Beta, DCS settings

 

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...