nigelmcelwee Posted November 24, 2015 Posted November 24, 2015 I cannot seem to connect to the tower on the VHF AM radio. I have my HOTAS key bound to the MAIN comms popup. I tune the VHF AM to the tower freq, turn the radio on, switch the radio dial to VHF AM (number 3 on the dial) and send a radio message to startup but I dont get a response. Am I missing something here? Core i7 7700K @ 4.5 GTX 1080ti OC 11gb DDR 5 16 GB pc 3200 DDR with XMP Crucial 500GB SSD Crucial 1TB SSD Asus 31.5" @ 1920x1080 Track IR Thurstmaster pedals Thurstmaster HOTAS Warthog
Cibit Posted November 24, 2015 Posted November 24, 2015 Have you assigned Pilot radio trigger radio as opposed to pilot radio trigger intercom on the INS cyclic stick control options i5 8600k@5.2Ghz, Asus Prime A Z370, 32Gb DDR4 3000, GTX1080 SC, Oculus Rift CV1, Modded TM Warthog Modded X52 Collective, Jetseat, W10 Pro 64 [sIGPIC][/sIGPIC] Adding JTAC Guide //My Vid's//229th AHB
nigelmcelwee Posted November 24, 2015 Author Posted November 24, 2015 Have you assigned Pilot radio trigger radio as opposed to pilot radio trigger intercom on the INS cyclic stick control options well when I hit the button I assigned to communications it doesnt say "interphone" at the top it says "main" should it say something different? Core i7 7700K @ 4.5 GTX 1080ti OC 11gb DDR 5 16 GB pc 3200 DDR with XMP Crucial 500GB SSD Crucial 1TB SSD Asus 31.5" @ 1920x1080 Track IR Thurstmaster pedals Thurstmaster HOTAS Warthog
Cibit Posted November 24, 2015 Posted November 24, 2015 (edited) It should say AM or FM or UHF iirc Just checked above is correct for comms using the rotary to change radios and activated by radio trigger radio Edited November 24, 2015 by Cibit i5 8600k@5.2Ghz, Asus Prime A Z370, 32Gb DDR4 3000, GTX1080 SC, Oculus Rift CV1, Modded TM Warthog Modded X52 Collective, Jetseat, W10 Pro 64 [sIGPIC][/sIGPIC] Adding JTAC Guide //My Vid's//229th AHB
nigelmcelwee Posted November 24, 2015 Author Posted November 24, 2015 ill have to check my key assignment to make sure that the comms is setup correctly. I dont see FM, AM, or UHF. I only see the Main at the top. Core i7 7700K @ 4.5 GTX 1080ti OC 11gb DDR 5 16 GB pc 3200 DDR with XMP Crucial 500GB SSD Crucial 1TB SSD Asus 31.5" @ 1920x1080 Track IR Thurstmaster pedals Thurstmaster HOTAS Warthog
Justificus Posted December 15, 2015 Posted December 15, 2015 I just wanted to jump in hear to hijack this thread a little instead of starting a new one... I haven't used the radio much at all so far but plan on doing so soon as it's one of the last systems I'm trying to learn (after all, blowing stuff up is a lot more fun than talking to people on a radio. :) ) One question I have is are you able to communicate with the towers while in flight? I've noticed that when I'm starting up at an airfield, I can talk to the tower but as soon as I'm airborne the radio menu is unavailable. I'm assuming it's because I've done nothing with the radio dials and need to. I tried autostarting to see if that would make things different but it doesn't. I want to learn how to use this because of using a lua script that has menu radio options that I'd like to be able to use while flying. Thanks. Justificus System Specs:i7 4970K @ 4.8, GTX 1080 SC, 32GB G.Skill DDR 2133,Thermaltake Level 10 Full Tower Case, Noctua NH-D15 6 Cooler, Win 10 Pro, Warthog, CH Pro Pedals, CH Throttle Quadrant, Oculus, 1 32" & 2 19" Monitors Modules Owned: A-10C I+II, Ka-50, FC3, F-86, Mig-15, Mig21, UH-1H, Mi-8, CA, P-51D, BF-109K-4, FW-190 D-9, Hawk, NTTR, M-2000C, SA342, F-5E, Spit Mk. IX, AJS-37, Normandy, WWII A.P., AV-8B, F/A-18C, L-39, Persian Gulf, Mig-19P, I-16, Super Carrier, F-16, Channel, Syria
Cibit Posted December 16, 2015 Posted December 16, 2015 (edited) Just uploading a quick video to hopefully help out:) Edited December 16, 2015 by Cibit 1 i5 8600k@5.2Ghz, Asus Prime A Z370, 32Gb DDR4 3000, GTX1080 SC, Oculus Rift CV1, Modded TM Warthog Modded X52 Collective, Jetseat, W10 Pro 64 [sIGPIC][/sIGPIC] Adding JTAC Guide //My Vid's//229th AHB
Justificus Posted December 16, 2015 Posted December 16, 2015 Just uploading a quick video to hopefully help out:) Cibit, mate, that was sooo helpful! Despite having read a bit now that helped put it all together for me. I was initially embarrassed to discover my first mistake was forgetting to set up a switch for the radio...:megalol::doh: Now I can trigger my targets and flights while in the air in my Nevada multi-module training/touring mission I'm working on. Thanks again for taking the time to do that. :thumbup: Justificus System Specs:i7 4970K @ 4.8, GTX 1080 SC, 32GB G.Skill DDR 2133,Thermaltake Level 10 Full Tower Case, Noctua NH-D15 6 Cooler, Win 10 Pro, Warthog, CH Pro Pedals, CH Throttle Quadrant, Oculus, 1 32" & 2 19" Monitors Modules Owned: A-10C I+II, Ka-50, FC3, F-86, Mig-15, Mig21, UH-1H, Mi-8, CA, P-51D, BF-109K-4, FW-190 D-9, Hawk, NTTR, M-2000C, SA342, F-5E, Spit Mk. IX, AJS-37, Normandy, WWII A.P., AV-8B, F/A-18C, L-39, Persian Gulf, Mig-19P, I-16, Super Carrier, F-16, Channel, Syria
Cibit Posted December 16, 2015 Posted December 16, 2015 Your more than welcome. Glad to help out:thumbup: Thanks for the rep too:) i5 8600k@5.2Ghz, Asus Prime A Z370, 32Gb DDR4 3000, GTX1080 SC, Oculus Rift CV1, Modded TM Warthog Modded X52 Collective, Jetseat, W10 Pro 64 [sIGPIC][/sIGPIC] Adding JTAC Guide //My Vid's//229th AHB
Recommended Posts