Jump to content

Recommended Posts

Posted (edited)

I don't know if it's DCS or the Gazelle or the Campaign or the Mission or What but I am getting thoroughly sick of not being able to enjoy flying because there is always some gd thing wrong.

 

I have updated DCS 1.5 OB twice since last Friday (incl ystrdy) and since cannot fly the Gazelle Campaign Mission 3.

As I approach WP 4 (to find a spot from where I am in range and can blast vehicles before they cross the bridge), DCS has puked back to the desktop. Both times at the exact same location (give or take a half mile).

Whether it's the location OR just "X" number of minutes of flying (since both sys crashes happened in about the same amount of time) I don't know.

 

But I have tried 2 times today.

I'm not even going to try flying anything else until I know this issue is fixed.

I spend more time frigging around than I do enjoying flight because there always seems to be issues.

It's super frustrating.

DCS_Log_Crash_Files.zip

Edited by SnowTiger
Going to try to attached Log files.

SnowTiger
AMD Ryzen 9 7950X - Zen 4 16-Core 4.5 GHz - Socket AM5 - 170W Desktop Processor
ASUS ROG STRIX X670E-A GAMING WIFI 6E Socket AM5 (LGA 1718) Ryzen 7000 gaming motherboard
Geforce RTX 4090 Gaming Trio X -  24GB GDDR6X + META Quest 3 + Controllers + Warthog Throttle, CH Pro Pedals, VKB Gunfighter MKII MCG Pro
G.SKILL Trident Z5 Neo Series 64 GB RAM (2 x 32GB) 288-Pin PC RAM DDR5 6000 RAM

Posted

I have the same problem, at the same mission.

I thought that it was the changing of my graphics card (980 -> 1080).

Currently, I'm trying when changing graphic options ...

Bon courage!

Posted

Oddly I just flew it again and had no problem.

Then half way thru Mis 4 there was SO MUCH LAG the gazelle was all over the F'ing place.

I couldn't possibly land for the Lag/Frame Rate i.e. 1 frame per second !!!

Sickening

SnowTiger
AMD Ryzen 9 7950X - Zen 4 16-Core 4.5 GHz - Socket AM5 - 170W Desktop Processor
ASUS ROG STRIX X670E-A GAMING WIFI 6E Socket AM5 (LGA 1718) Ryzen 7000 gaming motherboard
Geforce RTX 4090 Gaming Trio X -  24GB GDDR6X + META Quest 3 + Controllers + Warthog Throttle, CH Pro Pedals, VKB Gunfighter MKII MCG Pro
G.SKILL Trident Z5 Neo Series 64 GB RAM (2 x 32GB) 288-Pin PC RAM DDR5 6000 RAM

Posted
Oddly I just flew it again and had no problem.

Then half way thru Mis 4 there was SO MUCH LAG the gazelle was all over the F'ing place.

I couldn't possibly land for the Lag/Frame Rate i.e. 1 frame per second !!!

Sickening

 

 

 

SnowTiger.

 

I understand it is a bit frustrating. Remember we can't hold the Developers of this great sim to the high standards we have for the Top Rated titles in PC gaming.

 

This is a small group of guys who had an idea, to make a Flight Sim so accurate is would feel like flying the real thing (or as close as they could get). We are kind of spoiled in a way. The top games have huge budgets and marketing teams programmers like mad.

 

 

Be patient it will get fixed. I have the same issue by the way.

This was a Boutique Builder iBuypower rig. Until I got the tinker bug again i7 920 @3.6Mhz 12Gig Corsair XMS3 ram 1600 Nvidia 760 SLi w/4Gig DDR5 Ram Intel 310 SSD HDD 160 Gb + Western Digital 4Terabyte HDD Creative SB X-Fi HD Audio Logitech X-530 5.1 Surround Speaker System Dual Acer 32"Monitors. PSU 1200 w Thermaltake Win10 64Bit.

  • 2 weeks later...
Posted

My experiences with DCS in the last year ...

 

Hello!

 

After flying a lot with FC3 and the wonderful VIGGEN, I would like to write down a report of my experiences with the simulation.

Not a detailed bug report relating to a certain problem that I can fix, but a collection of more or less annoying issues.

 

Before I forget: thanks for making the DCS addons, they are great, no discussion about! Please carry on!

 

So much works really fine and looks wonderful, but I guess 1.5.xx needs a long phase of trouble shooting in general, which IMHO must be priority no.1 for now. I hope that most of them can be solved in a proper manner.

 

1. problem - CTDs (not too bad)

I crash to desktop more often than - lets say - one year before (before I used FC3 only, now I use FC3 and Viggen).

This happens after using the simulation for a while, and then using the EXIT button.

I know, data about the CTDs, like crashlogs and so on, is key to find bugs.

I had CTDs when using FC3 as the only addon but with Viggen too. CTDs only happend after playing multiplayer games.

I am pretty sure that a CTD - after pressing EXIT - doesn't change the filesystem or something else too much.

DCS starts normal after the CTD.

To get me right, for me this is not a big issue, but it shows that something is not working properly.

In the next days I will try to collect data.

This problem directly relates to this topic here. (https://forums.eagle.ru/showthread.php?t=182314)

 

2. problem - speed of CONTROL SETUP GUI (just a little bad).

Sometimes, when flying, I want to adjust controls. When entering the control setup the GUI is slow.

In most cases the GUI is so slow, that it doesn't recognize a new keyboard assignment for a certain simulation action.

In this case I have to use the drop down menus to assign keyboard/mouse/joystick inputs. I still haven't found out in which situations this effect happens and in which not. In fact when it happens, it stays permanent.

I noticed this effect with FC3 and Viggen also.

My solution is to restart DCS.

This problem relates to this topic, in a slightly changed behaviour: https://forums.eagle.ru/showthread.php?t=181511

 

3. problem - speed of GUI (bad)

Since a long time, the GUI of DCS is sometimes getting slow, and sometimes it comes to full stop, nothing happends anymore.

It happens when the simulation runs a while, especially after playing missions that have been created with the mission editor.

Even if I play single player missions from the addons, or self-made "one-aircraft-in-the-world missions-just-for-flying-around" made with the mission editor, the effect is noticable. I noticed this effect with FC3 and Viggen also.

My solution is to restart DCS.

For this problem I wasn't able to find a specific topic, sorry.

 

I have all three effects on both my power machine (16GB RAM), and on my laptop (8GB RAM) too, both are running Windows7 Professional 64-bit SP1.

Installed on both systems is: DCS+FC3+Viggen.

 

Kind regards,

TOViper

Visit https://www.viggen.training
...Viggen... what more can you ask for?

my computer:
AMD Ryzen 5600G 4.4 GHz | NVIDIA RTX 3080 10GB | 32 GB 3.2 GHz DDR4 DUAL | SSD 980 256 GB SYS + SSD 2TB DCS | TM Warthog Stick + Throttle + TRP | Rift CV1

 

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...