CH Pro Throttle - Viggen

[Chops]

I have a new Pro Throttle, and am trying to setup control mapping.

 

I am finding that the mini-hat switch on the Pro Throttle is very sensitive and hard to control when using it with the Viggen module. I tried mapping it to the RB-05 missle, and the Radar Stick, but neither work well.

 

Has anyone successfully mapped the mini-hat, and if so how are you using this control?

[ac5]

Yes, here....

You have to set the curvature very high > 100.

[Chops]

Thank you. How do you have the mini-hat mapped? What are you using it for?

[ac5]

Mostly for "absolute camera view"

[grunf]

I use CH throttle mini stick for radar and RB-05 (with modifier), with 15 curves and 5 deadzone. Works pretty good.

[Chops]

Thanks for your help.

 

Which modifier do you use for RB-05?

[splash]

Radar and RB-05 with pinky button in Fighterstick. Curve is 15.

[grunf]

Thanks for your help.

 

Which modifier do you use for RB-05?

My standard modifier, the left most button on throttle handle, button 4 IIRC.

[Chops]

I tried using a 15 curve and 5 deadzone for the mini-hat mapped to radar stick.

 

It didn't work. When I tap the mini-hat in one direction the radar cross just keeps moving.

 

I must be missing something.

[lemoen]

I tried using a 15 curve and 5 deadzone for the mini-hat mapped to radar stick.

 

It didn't work. When I tap the mini-hat in one direction the radar cross just keeps moving.

 

I must be missing something.

 

Bigger deadzone.

[grunf]

I tried using a 15 curve and 5 deadzone for the mini-hat mapped to radar stick.

 

It didn't work. When I tap the mini-hat in one direction the radar cross just keeps moving.

 

I must be missing something.

Mine does that too sometimes, I have to manually "re-center" it and than it stops. Bigger deadzone may help.

[Chops]

I have tried using a larger deadzone and changing the curve on the Mini-Hat, however, it is still not functional.

 

The radar cross keeps moving in what ever direction the mini-hat is moved.

 

Not sure why CH would make a control that is so sensitive. To bad it doesn't work like a normal Hat Switch.

 

Any other suggestions?

[ac5]

And by the way you guys,

Inside the CH Pro Throttle on the "sledge" are two "O"

rubber rings that not allow the full extent of the throttle,

which should be on the CH Control Manager 0 - 255.

I have removed those (Warranty void!), and although

it still not allows 0 - 255 it is much better, and the Viggen goes

to afterburner stage 3 and idle better, and obviously so the other planes.

[Chops]

I installed the CH Control Manager software, and calibrated all of my CH hardware. I was able to calibrate the Mini-Hat (Mini Joystick) and it works correctly now.

 

Although it did wipe out all of my Control Mapping. Not that big of a deal, but it will have to be done for all my aircraft.

Edited February 26, 2017 by Chops