dburne Posted September 8, 2017 Author Share Posted September 8, 2017 There is an adhesive back piece of plastic of some sort glued to the underneath of the plate on the desk mount that clamps down to the desk from the top. After many uses now, that piece is apparently sliding back from the plate it is glued to somewhat. Don B EVGA Z390 Dark MB | i9 9900k CPU @ 5.1 GHz | Gigabyte 4090 OC | 64 GB Corsair Vengeance 3200 MHz CL16 | Corsair H150i Pro Cooler |Virpil CM3 Stick w/ Alpha Prime Grip 200mm ext| Virpil CM3 Throttle | VPC Rotor TCS Base w/ Alpha-L Grip| Point Control V2|Varjo Aero| Link to comment Share on other sites More sharing options...
Merlin_VFA34 Posted September 10, 2017 Share Posted September 10, 2017 Hi Merlin, Glad to hear you're enjoying the MT-50 Flightstick! Regarding this issue, it's typically caused by some types of USB hubs. Are you using a usb-hub? If so can you test without it just to check? Hi, no the hub is not the problem. I have tested it with other hubs and direct connected to the computer. At the moment I think this happens because at least my computer seems to power off all usb devices a few times during the boot process. Maybe the electronics have a problem with short power disconnects und geht into a weird state? This is what happens with differnet configurations: PC: all buttons are pressed or brake axis + button 19 not working ca. 50% of all boots and reboots passive USB hub ob the Logitech G11 Keyboard: the same as pluged directly into the PC powered USB 3.0 hub: the same as pluged directly into the PC funny usb driver errors. I have to reinstall the usb speedport driver again to get it working again. The mainboard is a Asus ROG Strix Z270F Greetings Merlin :) Link to comment Share on other sites More sharing options...
Recommended Posts