JG14_Smil Posted November 5, 2017 Posted November 5, 2017 Hello, My on board graphics died. I was using it for my fourth "gauges" monitor. I am running a Titan. Can I run an old GTX 680 in my #2 AGP slot as my #2 card to run my gauges? Thanks,
ricktoberfest Posted November 5, 2017 Posted November 5, 2017 I don’t know the answer to your question, but how did you get the onboard gfx to output to a second monitor? I never thought of that - mines just disabled Sent from my iPhone using Tapatalk
tintifaxl Posted November 5, 2017 Posted November 5, 2017 AGP? Don't think a GTX 680 fits into that slot. 1 Windows 10 64bit, Intel i9-9900@5Ghz, 32 Gig RAM, MSI RTX 3080 TI, 2 TB SSD, 43" 2160p@1440p monitor.
JG14_Smil Posted November 5, 2017 Author Posted November 5, 2017 (edited) Thanks, I think I am wrong on calling it AGP. Sorry about that. ricktoberfest: It is pretty easy. You just enable it and plug in a HDMI cable. I run three monitors on the Titan and then the fourth for gauges. Edited November 5, 2017 by JG14_Smil
JG14_Smil Posted November 5, 2017 Author Posted November 5, 2017 I'm using the proper slot but the system won't post when I put the card in. Looks like I won't be flying again after all (until fixed).
Demon_ Posted November 5, 2017 Posted November 5, 2017 What is your power supply? 1 Attache ta tuque avec d'la broche.
ricktoberfest Posted November 5, 2017 Posted November 5, 2017 Thanks, I think I am wrong on calling it AGP. Sorry about that. ricktoberfest: It is pretty easy. You just enable it and plug in a HDMI cable. I run three monitors on the Titan and then the fourth for gauges. Something new to try! Thanks Sent from my iPhone using Tapatalk 1
JG14_Smil Posted November 6, 2017 Author Posted November 6, 2017 I'm not sure right now Demon.. I'll have a look next time I open her up. I usually buy the good stuff when I order a system. There is a possibly that one of the two 680s I had was inoperable. I seem to remember something to that effect and I will give the other card a try. If that doesn't do it I am overdue for a new DCS system anyway. :) I'll use this system to run my CnC router and KickR smart trainer.
BitMaster Posted November 9, 2017 Posted November 9, 2017 waiiit...depending on your chipset, you may, or likely, need to activate that slot in bios first. If you have a client chipset with 16 lanes, basically all 1150 and 1151 socket chips, those need to be set to 8x + 8x instead of 16x + 0x ( disabled ). The card wont boot, aka be initialized if no lanes are routed to the card. Check Bios is my tip Gigabyte Aorus X570S Master - Ryzen 5900X - Gskill 64GB 3200/CL14@3600/CL14 - Sapphire Nitro+ 7800XT - 4x Samsung 980Pro 1TB - 1x Samsung 870 Evo 1TB - 1x SanDisc 120GB SSD - Heatkiller IV - MoRa3-360LT@9x120mm Noctua F12 - Corsair AXi-1200 - TiR5-Pro - Warthog Hotas - Saitek Combat Pedals - Asus XG27ACG QHD 180Hz - Corsair K70 RGB Pro - Win11 Pro/Linux - Phanteks Evolv-X
Recommended Posts