some issues with / without crashes

[caponi]

Hi,

 

first start with su-33 in normandy crashes

 

F-15C did not use defined joystick/throttle on all maps

 

SU-27 / SU-33 crashes

 

MIG-21 freezes

 

Mirage works fine !!!

 

all crashes/freezes at mission start

 

here some locks

[caponi]

after install latest graphic driver 391.1

 

same behaviours

 

Su-27 crash.log

[BIGNEWY]

Thanks, the team will take a look

 

# -------------- 20180314-193516 --------------

H:\Eagle Dynamics\DCS World OpenBeta\bin\Weather.dll

# C0000005 ACCESS_VIOLATION at 7D53FD6E 00:00000000

00000000 00000000 0000:00000000

7D53FD6E 00CFE2D0 0000:00000000 H:\Eagle Dynamics\DCS World OpenBeta\bin\Weather.dll ?getTurbulenceInLayer@IAtmosphere@Weather@@IEBA?AV?$Vector@$02N@Math@@AEBV34@N@Z()+15E

7D541753 00CFE3F0 0000:00000000 H:\Eagle Dynamics\DCS World OpenBeta\bin\Weather.dll ?getAtmoWind_w@StaticAtmosphere@Weather@@UEBA?AV?$Vector@$02N@Math@@AEBV34@N@Z()+203

80234135 00CFE870 0000:00000000 H:\Eagle Dynamics\DCS World OpenBeta\bin\FMBase.dll ?simulate@AerodyneFM@EagleFM@@UEAAXN@Z()+9E5

6796EC75 00CFEA00 0000:00000000 H:\Eagle Dynamics\DCS World OpenBeta\Mods\aircraft\Flaming Cliffs\bin\Su33.dll

1003C7E7 00CFEB60 0000:00000000 H:\Eagle Dynamics\DCS World OpenBeta\bin\DCS.exe

0FEF021D 00CFEE70 0000:00000000 H:\Eagle Dynamics\DCS World OpenBeta\bin\DCS.exe

0FEF8C2A 00CFEEA0 0000:00000000 H:\Eagle Dynamics\DCS World OpenBeta\bin\DCS.exe

8BEDC363 00CFEF20 0000:00000000 H:\Eagle Dynamics\DCS World OpenBeta\bin\World.dll

8BEDC911 00CFEF80 0000:00000000 H:\Eagle Dynamics\DCS World OpenBeta\bin\World.dll

100C0A86 00CFEFF0 0000:00000000 H:\Eagle Dynamics\DCS World OpenBeta\bin\DCS.exe

100D1435 00CFF050 0000:00000000 H:\Eagle Dynamics\DCS World OpenBeta\bin\DCS.exe

0FD3B78B 00CFF080 0000:00000000 H:\Eagle Dynamics\DCS World OpenBeta\bin\DCS.exe

0FD3D33E 00CFF7D0 0000:00000000 H:\Eagle Dynamics\DCS World OpenBeta\bin\DCS.exe

102509A3 00CFF810 0000:00000000 H:\Eagle Dynamics\DCS World OpenBeta\bin\DCS.exe

95451FE4 00CFF840 0000:00000000 C:\WINDOWS\System32\KERNEL32.DLL BaseThreadInitThunk()+14

9558EFC1 00CFF890 0000:00000000 C:\WINDOWS\SYSTEM32\ntdll.dll RtlUserThreadStart()+21

[too-cool]

Thanks, the team will take a look

I have 3 issues that I have found since updating 2.5 today. I have done a clean up, and repair but still have the same issues.

1. Creating a game using FW190D9 when I activate the circuit breaker the landing gear collapse, when viewing the flaps and gear buttons in cockpit it show the gear as being in the up position so when you turn on the breakers the plane falls because the gear it raised.

2. When attempting to start the 190 either by quick start or manual, the plane will not start regardless of how long you hold the starter switch up.

3. when going through the cold start training for the A10C, when the instructor directs you to switch on the battery power the game locks up.

4. When starting DCS I get the diag. box that says DCS DLC Registration and it gives a input box the register a. A10A, F-15C, SU-25 and SU-27 which are all part of Flaming Cliffs which I have installed on my system. It gives two choices, one is to bind and the other is to skip, if you skip all 4, the game starts, if you enter you FC s/n for each a/c and tell it to bind each the game also starts but once you close the game down and restart, you have to go through the same process again.

 

Log file too large. TC

Edited March 15, 2018 by too-cool

[BIGNEWY]

ED have been working hard and we hope to have a hotfix out soon, please retry after the hotfix. Thanks

[caponi]

all things, except the Mig-21 freeze, are working now ... :thumbup:

 

i could see some improvements on lightning !?

 

but all buildings on the Nevada map disappears :helpsmilie:

the map is empty ... only roads and trees

[BIGNEWY]

all things, except the Mig-21 freeze, are working now ... :thumbup:

 

i could some improvements in the lightning !?

 

but all buildings on the Nevada map disappears :helpsmilie:

the map is empty ... only roads and trees

 

nevada buildings issue is reported

[caponi]

:thumbup: ... is a hot phase at the moment ... i know these situations :)

[too-cool]

nevada buildings issue is reported

All my issues resolved in post #4, except issue # 4 (registering). TC

[BIGNEWY]

All my issues resolved in post #4, except issue # 4 (registering). TC

 

If you have the individual aircraft installed remove them in the module manager and just use FC3 it should fix this.

[too-cool]

If you have the individual aircraft installed remove them in the module manager and just use FC3 it should fix this.

Worked. Thanks TC

[caponi]

after update 5:

 

i flow the MIG-21Bis again ... without controllers connected.

 

so i flow with keyboard ...

 

The program starts and i could took control over the keyboard ....

 

it works, but ... after a short time the picture freezes and the sound went on ...

FOV at this moment was 140 ...

 

This is the old behaviour ...

 

have a nice day ...

Edited March 22, 2018 by caponi

[caponi]

Hi BIGNEWY,

 

i found something like this in the log:

 

2018-03-21 18:41:51.038 ERROR DX11BACKEND: Can't find precompiled shader posteffects/lenscompute.fx:DIRECTX11=true;MSAA=16;USE_DCS_DEFERRED=1;.

2018-03-21 18:41:51.038 INFO DX11BACKEND: Compile shader: posteffects/lenscompute.fx:DIRECTX11=true;MSAA=16;USE_DCS_DEFERRED=1;

 

 

i was wondering because my MSAA setting is off @ moment !

is that normal ?

[BIGNEWY]

mmm not sure to be honest never noticed before and not sure if it is normal or not

 

to be sure go to your options.lua and rename it ( keep it as a backup )

 

C:\Users\yourname\Saved Games\DCS.openbeta\Config\options.lua

 

restart DCS and redo your options preferences