RuskyV Posted May 31, 2018 Posted May 31, 2018 I guess the massive acceleration speed of the jet during afterburner is just to subtle for some to get their heads round..
b1n4ry Posted May 31, 2018 Posted May 31, 2018 Refering to an similar thread here: https://forums.eagle.ru/showthread.php?t=210241&page=2 Also see my answer in there: https://forums.eagle.ru/showpost.php?p=3507869&postcount=14 AMD R5 3600 @ 4,5GHz, ASUS TUF RTX 3070 Ti, MSI Tomahawk B450 MAX, 32GB G.Skill Aegis DDR4-3200, Liquid Freezer II 280, Corsair HXi Series HX750i
flyingscotsman Posted June 3, 2018 Posted June 3, 2018 To set it up using the lifts in the Warthog, just go to axis tune, check the slider option, open the throttle control to full military power, and using the dead zone slider, you can adjust the throttle so that the dots are overlapping in the graph, and then test it in flight. They may need a little very fine tuning to get it just right so you have full military power short of the detents, and afterburner as soon as you jump the detents. Works very well, and you can adjust all the non-afterburner types so you just push to the detents for full military power in those too. The resolution is good enough that you still have fine control. Thanks for the info, could this work for Idle too? Reason I ask is I found the idle action on the slide only got “seen” when retarding. So button 29 works, but to start I have to pass the throttle Into idle and back again, the engine spools up ok. Unlike the axis you cannot reverse the action. This might resolve that
Sierra99 Posted June 7, 2018 Posted June 7, 2018 (edited) Perhaps we can petition Debolestis to create one for the Warthog that instead of being a "lift up and over" stop...is more of a "Bump" that we can just push across if we want to. Edit: It appears he already HAS... https://www.shapeways.com/shops/debolestis?section=TM+Warthog&s=0 Now I'm not sure which is which but we have options. Edited June 7, 2018 by Sierra99 [sIGPIC][/sIGPIC] Primary Computer ASUS Z390-P, i7-9700K CPU @ 5.0Ghz, 32GB Patriot Viper Steel DDR4 @ 3200Mhz, ZOTAC GeForce 1070 Ti AMP Extreme, Samsung 970 EVO M.2 NVMe drives (1Tb & 500 Gb), Windows 10 Professional, Thrustmaster Warthog HOTAS, Thrustmaster Warthog Stick, Thrustmaster Cougar Throttle, Cougar MFDs x3, Saitek Combat Rudder Pedals and TrackIR 5. -={TAC}=-DCS Server Gigabyte GA-Z68XP-UD3, i7-3770K CPU @ 3.90GHz, 32GB G.SKILL Ripjaws DDR3 @ 1600Mhz, ZOTAC GeForce® GTX 970.
Roller25 Posted June 7, 2018 Posted June 7, 2018 (edited) Perhaps we can petition Debolestis to create one for the Warthog that instead of being a "lift up and over" stop...is more of a "Bump" that we can just push across if we want to. Edit: It appears he already HAS... https://www.shapeways.com/shops/debolestis?section=TM+Warthog&s=0 Now I'm not sure which is which but we have options. If you have a 3d printer you can print your own with the file I uploaded here.. https://forums.eagle.ru/showthread.php?p=3513780#post3513780 Edited June 8, 2018 by Roller25
Thermal Posted June 7, 2018 Posted June 7, 2018 I have the dual-ab detent from Debolestis. Its good. (Also Shapeways offer free shipping on your first order I believe, so for ~$7 bucks its a no brainer).
skypirate Posted June 10, 2018 Posted June 10, 2018 Refering to an similar thread here: https://forums.eagle.ru/showthread.php?t=210241&page=2 Also see my answer in there: https://forums.eagle.ru/showpost.php?p=3507869&postcount=14 That's pretty much the best solution for those flying with TM Warthog Throttles. Added bonus, you can use the modified detent to configure the CLB mode on your FSL A320X in P4D :joystick: [sIGPIC][/sIGPIC]Regards!
cuchara Posted February 2, 2021 Posted February 2, 2021 En 31/5/2018 a las 15:35, Vitormouraa dijo: You don't need lamps and warning lights telling you the AB is on. Just look at the nozzle, they will always open. If not, you're screwed no external view..... 5800x3d-32gb-4080 super-trackir-Quest 3-TM warthog-2560x1440
Recommended Posts