Jump to content

Navigation problem with waypoint


Solid84

Recommended Posts

Hi, i've experienced an issue with the waypoint navigation.

 

I have set the "waypoint" and "auto" option on HSI, but when a waypoint is reached, HSI doesn't switch automatically to the next one.

 

I've tried several times, but with no luck.

I5-7600K@4,8Ghz - G Skill TridentZ 16Gb 3200 CL14 - Aorus GTX 1080TI - Samsung 950 PRO 512GB NVMe M.2 PCIe 3.0 x4 - Lenovo 24'' 1440p - Hotas Warthog - TrackIR 5

 

DCS 2.5 OB - M2000C - Mig21Bis - A10C - FC3 - AJS37 Viggen - F5E - AV8B N/A - F/A18 C - L 39 Albatros - Bf109 - Spitfire - P51D - Black Shark 2 - Nevada - Persian Gulf - Normandy

Link to comment
Share on other sites

How about boxing sequence button too. With waypoint button, sequence button and auto button selected, I get switching to the next waypoint number when I get to the current waypoint.

Windows 10 Pro 64bit|Ryzen 5600 @3.8Ghz|EVGA RTX 3070 XC3 Ultra|Corair vengence 32G DDR4 @3200mhz|MSI B550|Thrustmaster Flightstick| Virpil CM3 Throttle| Thrustmaster TFRP Rudder Pedal /Samsung Odyssey Plus Headset

Link to comment
Share on other sites

i've also tried with sequence button.

even with "waypoint", "sequence" and "auto" doesn't switch to next waypoint.

I5-7600K@4,8Ghz - G Skill TridentZ 16Gb 3200 CL14 - Aorus GTX 1080TI - Samsung 950 PRO 512GB NVMe M.2 PCIe 3.0 x4 - Lenovo 24'' 1440p - Hotas Warthog - TrackIR 5

 

DCS 2.5 OB - M2000C - Mig21Bis - A10C - FC3 - AJS37 Viggen - F5E - AV8B N/A - F/A18 C - L 39 Albatros - Bf109 - Spitfire - P51D - Black Shark 2 - Nevada - Persian Gulf - Normandy

Link to comment
Share on other sites

ok, i've tried different instant action mission, and in some of them it works.

 

For example in "free flight" it works.

 

But in "AG Gun and Rockets" and "conventional bombing" it doesn't.

 

strange behaviour...

I5-7600K@4,8Ghz - G Skill TridentZ 16Gb 3200 CL14 - Aorus GTX 1080TI - Samsung 950 PRO 512GB NVMe M.2 PCIe 3.0 x4 - Lenovo 24'' 1440p - Hotas Warthog - TrackIR 5

 

DCS 2.5 OB - M2000C - Mig21Bis - A10C - FC3 - AJS37 Viggen - F5E - AV8B N/A - F/A18 C - L 39 Albatros - Bf109 - Spitfire - P51D - Black Shark 2 - Nevada - Persian Gulf - Normandy

Link to comment
Share on other sites

Never really checked in those mission. I will try and see?

Windows 10 Pro 64bit|Ryzen 5600 @3.8Ghz|EVGA RTX 3070 XC3 Ultra|Corair vengence 32G DDR4 @3200mhz|MSI B550|Thrustmaster Flightstick| Virpil CM3 Throttle| Thrustmaster TFRP Rudder Pedal /Samsung Odyssey Plus Headset

Link to comment
Share on other sites

ok, i've tried different instant action mission, and in some of them it works.

 

For example in "free flight" it works.

 

But in "AG Gun and Rockets" and "conventional bombing" it doesn't.

 

strange behaviour...

I just tested those missions in Caucasus map, Nevada and Persian map and waypoint moves to the next waypoint on reaching current waypoint.

 

On the HSI page

OSB 6 Waypoint boxed

OSB 10 Sequence boxed

OSB 11 Auto box.

 

 

Working here.

Windows 10 Pro 64bit|Ryzen 5600 @3.8Ghz|EVGA RTX 3070 XC3 Ultra|Corair vengence 32G DDR4 @3200mhz|MSI B550|Thrustmaster Flightstick| Virpil CM3 Throttle| Thrustmaster TFRP Rudder Pedal /Samsung Odyssey Plus Headset

Link to comment
Share on other sites

I just tested those missions in Caucasus map, Nevada and Persian map and waypoint moves to the next waypoint on reaching current waypoint.

 

On the HSI page

OSB 6 Waypoint boxed

OSB 10 Sequence boxed

OSB 11 Auto box.

 

 

Working here.

 

Ok thanks.

 

probably it was my fault. but i don't know why... always using "waypoint", "sequence" and "auto"... always the same procedure.

 

Thank you so much, anyway. :thumbup:

I5-7600K@4,8Ghz - G Skill TridentZ 16Gb 3200 CL14 - Aorus GTX 1080TI - Samsung 950 PRO 512GB NVMe M.2 PCIe 3.0 x4 - Lenovo 24'' 1440p - Hotas Warthog - TrackIR 5

 

DCS 2.5 OB - M2000C - Mig21Bis - A10C - FC3 - AJS37 Viggen - F5E - AV8B N/A - F/A18 C - L 39 Albatros - Bf109 - Spitfire - P51D - Black Shark 2 - Nevada - Persian Gulf - Normandy

Link to comment
Share on other sites

What if accidentally switched to seq2 or 3, are there the same WP stored as in seq1? Did not use that function yet.

Specs:

 

System: Asus Z170-E, I7 6700K, 16GB DDR4, Asus GTX1070 8GB, 1TB M2 SSD + 2x 250GB SSD,TrackIR, TM Warthog, Saitek Rudder

Modules: A-10C, KA-50, Mi-8, UH-1H, FC3, F5E, M2000, AJS37, AV8b, F18C

 

Link to comment
Share on other sites

When I switch to sequence 2 and 3, there is usually no waypoint overlay on the hsi because waypoint are not programmed there. Not really sure how sequences 2 & 3 works but I think it is for additional waypoint created in-flight.

Windows 10 Pro 64bit|Ryzen 5600 @3.8Ghz|EVGA RTX 3070 XC3 Ultra|Corair vengence 32G DDR4 @3200mhz|MSI B550|Thrustmaster Flightstick| Virpil CM3 Throttle| Thrustmaster TFRP Rudder Pedal /Samsung Odyssey Plus Headset

Link to comment
Share on other sites

Ok thanks.

 

probably it was my fault. but i don't know why... always using "waypoint", "sequence" and "auto"... always the same procedure.

 

Thank you so much, anyway. :thumbup:

 

Are you always in nav mode, or in a/g mode sometimes when testing?

Link to comment
Share on other sites

Are you always in nav mode, or in a/g mode sometimes when testing?

 

always in nav mode

I5-7600K@4,8Ghz - G Skill TridentZ 16Gb 3200 CL14 - Aorus GTX 1080TI - Samsung 950 PRO 512GB NVMe M.2 PCIe 3.0 x4 - Lenovo 24'' 1440p - Hotas Warthog - TrackIR 5

 

DCS 2.5 OB - M2000C - Mig21Bis - A10C - FC3 - AJS37 Viggen - F5E - AV8B N/A - F/A18 C - L 39 Albatros - Bf109 - Spitfire - P51D - Black Shark 2 - Nevada - Persian Gulf - Normandy

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...