Jump to content

Recommended Posts

Posted
How have you done it for the first time?

 

I am doing the same but I can't. When we double click on the TDC Horizontal or vertical under throttle no setup window open

Posted

Odd. Works fine here.

Spoiler

Ryzen 7 9800X3D | 96GB G.Skill Ripjaws M5 Neo DDR5-6000 | Asus ProArt RTX 4080 Super | ASUS ROG Strix X870E-E GAMING | Samsung 990Pro 2TB + 990Pro 4TB NMVe | VR: Varjo Aero
VPC MT-50CM2 grip on VPForce Rhino with Z-curve extension | VPC CM3 throttle | VPC CP2 + 3 | FSSB R3L | VPC Rotor TCS Plus base with SharKa-50 grip | Everything mounted on Monstertech MFC-1 | VPC R1-Falcon pedals with damper | Pro Flight Trainer Puma

OpenXR | PD 1.0 | 100% render resolution | DCS graphics settings
Win11 Pro 24H2 - VBS/HAGS/Game Mode ON

 

Posted

This one? It's working for me...

 

 

 

attachment.php?attachmentid=187045&stc=1&d=1528546526

i7-7700K OC @ 5Ghz | ASUS IX Hero MB | ASUS GTX 1080 Ti STRIX | 32GB Corsair 3000Mhz | Corsair H100i V2 Radiator | Samsung 960 EVO M.2 NVMe 500G SSD | Samsung 850 EVO 500G SSD | Corsair HX850i Platinum 850W | Oculus Rift | ASUS PG278Q 27-inch, 2560 x 1440, G-SYNC, 144Hz, 1ms | VKB Gunfighter Pro

Chuck's DCS Tutorial Library

Download PDF Tutorial guides to help get up to speed with aircraft quickly and also great for taking a good look at the aircraft available for DCS before purchasing. Link

Posted
This one? It's working for me...

 

 

 

attachment.php?attachmentid=187045&stc=1&d=1528546526

 

This is me being stupid, I was trying to map the TDC with an AXIS on the AXIS page under TDC slew :doh:

 

Thanks for the screen shot David

Posted

I can't get this thing to work. I have a TM Warthog and try to bind the TDC to the slew axis (the little nob on the throttle) but no success! I do it according to the picture and I don't have any problems with other modules.

 

I can't even move the TDC with the default keyboard commands, it's stuck in the upper corner. Any suggestions?

i7-7700K @ 4.9 GHz | Gigabyte Aorus Geforce GTX 1080 Ti | 32 GB DDR4 Corsair Vengeance @ 2400 MHz (2800 OC) | Asus Strix Z270E Gaming | Samsung 970 EVO M.2 SSD 1 TB | Samsung 960 EVO M.2 SSD 500 GB | WD NAS Red 2TB SATA3 | Corsair Cooling Hydro Series H80i v2 | Thrustmaster Hotas Warthog | Saitek PRO rudder pedals | Valve Index

Posted (edited)
I can't get this thing to work. I have a TM Warthog and try to bind the TDC to the slew axis (the little nob on the throttle) but no success! I do it according to the picture and I don't have any problems with other modules.

 

I can't even move the TDC with the default keyboard commands, it's stuck in the upper corner. Any suggestions?

 

It's not the (TDC slew) see pic below.

 

Try and bind the Throttle Designator Controller (TDC) - AXIS under it.;)

 

If that is not the problem? Check the binding in options, make sure you can see if it's working, when moving in the options menu you will see the axis moving (White lines). Now make sure you have the right DDI selected using the sensor control switch hat on the stick. Read Chuck's F-18 guide page 111

 

 

attachment.php?attachmentid=187045&stc=1&d=1528546526

Edited by David OC

i7-7700K OC @ 5Ghz | ASUS IX Hero MB | ASUS GTX 1080 Ti STRIX | 32GB Corsair 3000Mhz | Corsair H100i V2 Radiator | Samsung 960 EVO M.2 NVMe 500G SSD | Samsung 850 EVO 500G SSD | Corsair HX850i Platinum 850W | Oculus Rift | ASUS PG278Q 27-inch, 2560 x 1440, G-SYNC, 144Hz, 1ms | VKB Gunfighter Pro

Chuck's DCS Tutorial Library

Download PDF Tutorial guides to help get up to speed with aircraft quickly and also great for taking a good look at the aircraft available for DCS before purchasing. Link

Posted
I can't get this thing to work. I have a TM Warthog and try to bind the TDC to the slew axis (the little nob on the throttle) but no success! I do it according to the picture and I don't have any problems with other modules.

 

I can't even move the TDC with the default keyboard commands, it's stuck in the upper corner. Any suggestions?

 

 

Just forget the TDC, check for Throttle Designator Controller :)

Posted
It's not the (TDC slew) see pic below.

 

Try and bind the Throttle Designator Controller (TDC) - AXIS under it.;)

 

If that is not the problem? Check the binding in options, make sure you can see if it's working, when moving in the options menu you will see the axis moving (White lines). Now make sure you have the right DDI selected using the sensor control switch hat on the stick. Read Chuck's F-18 guide page 111

 

 

attachment.php?attachmentid=187045&stc=1&d=1528546526

Thanks for your reply! Yeah, I was meaning the "Throttle Designator Controller", just wrote TDC to shorten it but understand the confusion :megalol:

 

So I finally got it to work with your hint to use the sensor control switch which I hadn't designated and wasn't aware that I had to use first - that was the problem all along! Big thanks for your help! :thumbup:

i7-7700K @ 4.9 GHz | Gigabyte Aorus Geforce GTX 1080 Ti | 32 GB DDR4 Corsair Vengeance @ 2400 MHz (2800 OC) | Asus Strix Z270E Gaming | Samsung 970 EVO M.2 SSD 1 TB | Samsung 960 EVO M.2 SSD 500 GB | WD NAS Red 2TB SATA3 | Corsair Cooling Hydro Series H80i v2 | Thrustmaster Hotas Warthog | Saitek PRO rudder pedals | Valve Index

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...