Korstat Posted September 3, 2018 Share Posted September 3, 2018 Hello after the recent updates. None of my key binds show for any aircraft it also doesn't show labels for the columns. I have attached a screen shot of what it shows for the A10C Sim it is the same for all aircraft. All my keys are still bound and work it just doesn't show anything. Also I have tried a repair and it did not fix the issue. Anybody else having this issue? Link to comment Share on other sites More sharing options...
Cobra747 Posted September 3, 2018 Share Posted September 3, 2018 Hello after the recent updates. None of my key binds show for any aircraft it also doesn't show labels for the columns. I have attached a screen shot of what it shows for the A10C Sim it is the same for all aircraft. All my keys are still bound and work it just doesn't show anything. Also I have tried a repair and it did not fix the issue. Anybody else having this issue? Yep, I am getting this too since last patch. :( Link to comment Share on other sites More sharing options...
specialksl Posted September 3, 2018 Share Posted September 3, 2018 I am having the same problem after the latest patch. Link to comment Share on other sites More sharing options...
Coug4r Posted September 4, 2018 Share Posted September 4, 2018 Ditto. - If man were meant to fly he'd be filled with helium. Link to comment Share on other sites More sharing options...
Kinger Posted September 5, 2018 Share Posted September 5, 2018 Same. Link to comment Share on other sites More sharing options...
Vyyper Posted September 5, 2018 Share Posted September 5, 2018 Same problem here... Link to comment Share on other sites More sharing options...
Cobra747 Posted September 5, 2018 Share Posted September 5, 2018 This problem is still persisting since 2.5.3.21235 Open Beta Hotfix 3 I have bought the helo pack but am unable to fly it as i cant assign any controls. :furious: Link to comment Share on other sites More sharing options...
Kinger Posted September 5, 2018 Share Posted September 5, 2018 It seems like mine disappears when I choose a custom option for my screen layout. My testing went like this....... 1.) Backed up my input folder located in saved games/DCS.openbeta/config 2.) Reran DCS 3.) Exited DCS 4.) Added input folder back in At this point all of my controls were available in the control page. I however am running a 5760x1080 resolution stretched across three monitors and as such I have a custom monitor setup lua so that the menus are in the center of the display. As soon as I select this custom lua from the options menu under screens I lose my controls on the controls page. Link to comment Share on other sites More sharing options...
Cobra747 Posted September 6, 2018 Share Posted September 6, 2018 this might be the common problem. i am also running 3 monitors @ 5760x1080. i tried deleting my Saved Games folder (backed it up) so it created a new one and it was still porked. Link to comment Share on other sites More sharing options...
Korstat Posted September 6, 2018 Author Share Posted September 6, 2018 So I verified if I change to 1 camera.lua I can now see my keybinds. But as soon as I switch to the 3 camera.lua I can no longer see them. So it seems its possible its related to multi monitor setup and may have been broke when they did the fix for the multi monitor F10 map issue that was going on a few patched ago. ED can we get some help here? Link to comment Share on other sites More sharing options...
Korstat Posted September 6, 2018 Author Share Posted September 6, 2018 ;3617951']this might be the common problem. i am also running 3 monitors @ 5760x1080. i tried deleting my Saved Games folder (backed it up) so it created a new one and it was still porked. I also tried this with the same outcome Link to comment Share on other sites More sharing options...
Cobra747 Posted September 6, 2018 Share Posted September 6, 2018 It seems like mine disappears when I choose a custom option for my screen layout. My testing went like this....... 1.) Backed up my input folder located in saved games/DCS.openbeta/config 2.) Reran DCS 3.) Exited DCS 4.) Added input folder back in At this point all of my controls were available in the control page. I however am running a 5760x1080 resolution stretched across three monitors and as such I have a custom monitor setup lua so that the menus are in the center of the display. As soon as I select this custom lua from the options menu under screens I lose my controls on the controls page. My settings were set to 3 screens @ 5760x1080 and the keybindings disappear. If i change it to 1 screen @ 5760x1080 then although it isnt as nice to use the main menu system it does give me back the controller input. What ever they changed in this patch for multi monitors has messed it up. :( Link to comment Share on other sites More sharing options...
Whozdär Posted September 6, 2018 Share Posted September 6, 2018 Had reported the same here, so I can say I reproduce as well. https://forums.eagle.ru/showthread.php?t=219335 Link to comment Share on other sites More sharing options...
Vyyper Posted September 6, 2018 Share Posted September 6, 2018 I am also running 3 monitors in surround. If I change to single monitor, I can see the bindings again. Go back to 3 and they are gone. I am also running 2.5.3.21235. Not an issue until that version update. Link to comment Share on other sites More sharing options...
petecassar Posted September 6, 2018 Share Posted September 6, 2018 Same here with multi monitor Link to comment Share on other sites More sharing options...
specialksl Posted September 7, 2018 Share Posted September 7, 2018 Are they ever going to address this problem? Do they even know it exists? Link to comment Share on other sites More sharing options...
Korstat Posted September 8, 2018 Author Share Posted September 8, 2018 Is there a way to make it so the developers will see this thread? Link to comment Share on other sites More sharing options...
Hornetjock Posted September 9, 2018 Share Posted September 9, 2018 Same problem here...3 monitors, no controllers and unable to see keybinds or axis sliders. Link to comment Share on other sites More sharing options...
specialksl Posted September 9, 2018 Share Posted September 9, 2018 Problem is fixed! I switched to another resolution of 5760x1080. I am not sure why I had 2 of them. Then I choose, 1 Screen. I restarted the game and the screen spanned all 3 monitors instead of the center one on the startup screen. Looked at the controls page and all categories showed. Game worked as usual on all 3 monitors. I hope this helps. Link to comment Share on other sites More sharing options...
kafete Posted September 11, 2018 Share Posted September 11, 2018 Same here with 4 monitor resulution Link to comment Share on other sites More sharing options...
Vyyper Posted September 12, 2018 Share Posted September 12, 2018 Still not fixed in the 2.5.3.2144 Open Beta that just came out today. I wish someone from ED would at least reply to this thread. Link to comment Share on other sites More sharing options...
overalien Posted September 15, 2018 Share Posted September 15, 2018 bump __________________ overalien Hog Driver starting to really like the Tomcat System specs: Intel i7-8700k - OC to 5.0 GHz | 32 GB RAM 3600 MHz | Nvidia 1080ti SLi | Mixed Storage - Win 10 and DCS on Samsung SSD 970 Pro Flightgear: 7 Displays (3 x 1440p, 1 X 1080p, 3 X Lilliput Touch) | 3 x Cougar MFDs | Warthog HOTAS | Thrustmaster TPR Pedals | iBEAM Shaker + Simshaker for Aviators w. Sound Module | Helios | VAICOM Pro + AIRIO | TrackIR 5 Link to comment Share on other sites More sharing options...
Whozdär Posted September 15, 2018 Share Posted September 15, 2018 As long as they know and that this doesn't get pushed to stable, then we can still opt out, change bindings in stable and come back in openbeta. Since they haven't pushed yet, I believe they must be looking into it ;) Link to comment Share on other sites More sharing options...
Cobra747 Posted September 17, 2018 Share Posted September 17, 2018 Still not fixed in the 2.5.3.2144 Open Beta that just came out today. I wish someone from ED would at least reply to this thread. Ive got a ticket in and directed them to this thread to highlight im not alone and they replied they are aware of this thread. They did say they are unable to recreate the problem and i sent them a few of my config files to assist. Hopefully they can nut it out soon. :smilewink: Link to comment Share on other sites More sharing options...
Whozdär Posted September 17, 2018 Share Posted September 17, 2018 If they're looking at this thread then I'll share what I said in my original report (https://forums.eagle.ru/showthread.php?t=219335) _ = function(p) return p; end; name = _('NAME'); Description = 'Left MFCD on the left monitor,Right MFCD on the right and camera on the center' Viewports = { Center = { x = 1920; y = 0; width = 1920; height = 1080; viewDx = 0; viewDy = 0; aspect = 1.778; } } LEFT_MFCD = { x = 0; y = 0; width = 900; height = 900; } RIGHT_MFCD = { x = 900; y = 0; width = 900; height = 900; } UIMainView = Viewports.Center Attached is a screenshot of my video settings, as you'll see i'm on a multi-monitor setup, which is crucial to reproduce the issue. Link to comment Share on other sites More sharing options...
Recommended Posts