104th_Money Posted October 18, 2018 Posted October 18, 2018 After the past 2 updates I noticed that I have to use less left/back stick to take off to hover. I reset control inputs after last update and it reverted to normal but after resetting since the most recent update it remains at less input. Anyone else having this prob? Intel i9-13900k, Asus Z790-E Gaming Wi-fi 2 motherboard, 64gb Corsair Vengeance LPX DDR5-6400 RGB ram 2x32gb XMP2 profile, 4TB Crucial T700 PCIE 5.0 SSD internal, 2TB Crucial T700 PCIE 5.0 SSD internal, Asus ROG Strix OC GeForce RTX 4090, Corsair 7000X Case with 5 x 120mm side mounted intake fans and 3 x 140mm top mounted exhaust fans, 1 x 140mm rear mounted exhaust fans, front mounted Corsair H150i Elite Capellix 360mm liquid cooler w/Elite LCD with 6 x 120mm fans in 3 push, 3 pull intake configuration, 1 x 32" Samsung 3840x2160 display, 1x 32" Asus 2560x1440 display, TrackIR5 w/pro clip, Thrustmaster Warthog stick and throttle, CH Fighterstick Pro and Pebble Beach Velocity pedals.
Loriath Posted October 18, 2018 Posted October 18, 2018 When you reset, did you put back any curves you may have setup on the Axis?
104th_Money Posted October 22, 2018 Author Posted October 22, 2018 Never had any curves set. What I did notice is that less collective is needed to get airborne, which means less input in cyclic to hover. Kind of weird, need to relearn the damn thing now. Intel i9-13900k, Asus Z790-E Gaming Wi-fi 2 motherboard, 64gb Corsair Vengeance LPX DDR5-6400 RGB ram 2x32gb XMP2 profile, 4TB Crucial T700 PCIE 5.0 SSD internal, 2TB Crucial T700 PCIE 5.0 SSD internal, Asus ROG Strix OC GeForce RTX 4090, Corsair 7000X Case with 5 x 120mm side mounted intake fans and 3 x 140mm top mounted exhaust fans, 1 x 140mm rear mounted exhaust fans, front mounted Corsair H150i Elite Capellix 360mm liquid cooler w/Elite LCD with 6 x 120mm fans in 3 push, 3 pull intake configuration, 1 x 32" Samsung 3840x2160 display, 1x 32" Asus 2560x1440 display, TrackIR5 w/pro clip, Thrustmaster Warthog stick and throttle, CH Fighterstick Pro and Pebble Beach Velocity pedals.
RePhil Posted August 27, 2019 Posted August 27, 2019 Has any one had control issues today just tried to fly and with no input from the stick slowly moves forward. I can watch co-pilots arm moving slowly ahead. I checked controls re did them same ting . Looked at the USB game controls and the stick stays steady This is after an Oculus S firmware update if that has any bearing [sIGPIC][/sIGPIC] Window 10, i9-9900,2080TI, 32GB ram Puma Pro Flight Trainer, 2 x 1TB WB SSD NVMe HP Reverb
Shadow KT Posted August 30, 2019 Posted August 30, 2019 huh, am I missing something here ? You've always needed to use back left stick with left rudder to take off in a hover ? @RePhil, check that you don't have any other controllers connected which might do that 'Shadow' Everybody gotta be offended and take it personally now-a-days
RePhil Posted September 1, 2019 Posted September 1, 2019 huh, am I missing something here ? You've always needed to use back left stick with left rudder to take off in a hover ? @RePhil, check that you don't have any other controllers connected which might do that Don't know what the issue was but did a repair restart all is fine now thanks [sIGPIC][/sIGPIC] Window 10, i9-9900,2080TI, 32GB ram Puma Pro Flight Trainer, 2 x 1TB WB SSD NVMe HP Reverb
Recommended Posts