Captain Slow Posted February 18, 2019 Share Posted February 18, 2019 (edited) Reproducible: 100% Date: 2018-02-18 2300Z Sim version: 2.5.4.27314 Open Beta Mission: Any Steps to reproduce: 1. Set radar to bvr/rws scan 2. angle the radar elevation to the highest or lowest 3. Enter WACQ or Vertical Scan. You will not achieve a lock against any target in your hud. 4. Go back to bvr mode and center antenna elevation 5. Go back to WACQ och Vertical Scan - now you can lock targets again. Problem: BVR antenna elevation affects ACM WACQ and Vertical Scan modes. Track: Track attached showing the issue in Vertical Scan. Doing the same in WACQ has a similar effect. Desired solution: Antenna elevation in BVR modes should be separate from ACM modes SP/MP: Affects both. System spec: Tested on multiple systems with same result. Controllers: Tested on multiple systems with same result.bvr elevation breaks acm modes.trk Edited February 18, 2019 by Captain Slow Link to comment Share on other sites More sharing options...
Svend_Dellepude Posted February 20, 2019 Share Posted February 20, 2019 Just to narrow it down. Having a not-centered elevation before entering WACQ will input a vertical offset to the scanzone. In VACQ a noncentered radar will input a lateral offset. [sIGPIC][/sIGPIC] Win10 64, Asus Maximus VIII Formula, i5 6600K, Geforce 980 GTX Ti, 32 GB Ram, Samsung EVO SSD. Link to comment Share on other sites More sharing options...
Captain Slow Posted February 21, 2019 Author Share Posted February 21, 2019 Just to narrow it down. Having a not-centered elevation before entering WACQ will input a vertical offset to the scanzone. In VACQ a noncentered radar will input a lateral offset. Exactly Link to comment Share on other sites More sharing options...
ED Team NineLine Posted February 22, 2019 ED Team Share Posted February 22, 2019 Reported, thanks. Forum Rules • My YouTube • My Discord - NineLine#0440• **How to Report a Bug** Link to comment Share on other sites More sharing options...
Recommended Posts