dwbarnett Posted March 16, 2019 Posted March 16, 2019 (edited) Hello folks, first off...kudos to Heatblur for a magnificent creation! Now most likely op error, having issues on C&D Pilot start. I get to the part re the Hydraulic switches Hi/LO, and transfer switch. I can move around and zoom in to see the switches and guards. If I open guard on transfer sw to ensure switch is off, and follow instructions for the Hyd pump LO/HI....if I accidentally close either transfer cover or pump cover, I can't get them to reopen to select the switches again. The pump stays in HI, so I can't move forward on start. I've had it happen all 3 times I have tried the steps. I'm then stuck, and have to restart training mission. I don't see any other reports, so most likely op error. I'll keep trying though. THanks David OK folowup...I just tried to do this training missiona few more times. What happens to me, I am zoomed in on the Hyd pump HI/LO sitch, I can see the cover and or the switch clearly. I click on the cover to open, I click the switch to LO, do my checks. Then following the mission, I then click to HI, do my checks. Now, when I verify the label says switch and not cover. I click to go to the Auto position, the cover closes, the pump remains in HI, no amount of clicking at this point will allow me to re-open the guard to click the switch again. Happens everytime. It's got to be OP error, as no one else has reported this issue. I just don't know what else I can do at this time. Edited April 1, 2019 by IronMike Follow up info. Intel® Core i9-9900X CPU @ 3.50GHz OC 4.5GHz,G.SkillDDR4-3200,X299 AORUS Ultra Gaming-CF,Samsung SSD 860 PRO 512GB,Samsung SSD 850 EVO 1TB,WDC WD1002FAEX-00Z3A0,WDC WD3003FZEX-00Z4SA0,NVIDIA GeForce RTX 2080 Ti(Watercooled AORUS 11GB),H100i Cooler. NVIDIA Driver:430.64 OS:Microsoft Windows 10 (10.0) Professional 64-bit (Build 17763) Periphials: TM Warthog A10 HOTAS/Throttle,CH Rudder Pedals. VR:Pimax 5K+,PiTools V1.0.1.129,HMD Firmware V2.1.255.212, SteamVR V1.1.18
imacken Posted March 16, 2019 Posted March 16, 2019 This behaviour has been reported in another couple of threads already. Needs to be fixed. Intel i7 12700K · MSI Gaming X Trio RTX 4090 · ASUS ROG STRIX Z690-A Wi-Fi · MSI 32" MPG321UR QD · Samsung 970 500Gb M.2 NVMe · 2 x Samsung 850 Evo 1Tb · 2Tb HDD · 32Gb Corsair Vengance 3000MHz DDR4 · Windows 11 · Thrustmaster TPR Pedals · Tobii Eye Tracker 5 · Thrustmaster F/A-18 Hornet Grip · Virpil MongoosT-50CM3 Base · Virpil Throttle MT-50 CM3 · Virpil Alpha Prime Grip · Virpil Control Panel 2 · Thrustmaster F-16 MFDs · HTC Vive Pro 2 · Total Controls Multifunction Button Box
flyingscotsman Posted March 16, 2019 Posted March 16, 2019 Hi, Training mission cold dark. In the rear cockpit on start up with Jester, I'm asked to click 'Data ADF to BOTH' Using Track IR but view is obscured by seatbelt, so lean left, up down round, When I can get the target square over the button, cannot get + to change to arrow and select, to continue. Stuck. Still enjoying it, will start with engines running and see if any one else reports Cheers
TargetDrone Posted April 4, 2019 Posted April 4, 2019 Seeing the same thing. I would think it is a low priority to fix, but since I don't know what the switch does I don't know how important it is I can't hit it.
Moafuleum Posted April 4, 2019 Posted April 4, 2019 Hi, Training mission cold dark. In the rear cockpit on start up with Jester, I'm asked to click 'Data ADF to BOTH' Using Track IR but view is obscured by seatbelt, so lean left, up down round, When I can get the target square over the button, cannot get + to change to arrow and select, to continue. Stuck. Still enjoying it, will start with engines running and see if any one else reports Cheers +1 i can't find the vitual box i have to click to activate this switch
Recommended Posts