Jump to content

Is it possible to use the Tpod to create slavepoints?


Recommended Posts

Posted
create MARK points(type DESG, not overfly), UFCP MRK

then switch between waypoints.

Something i can test today, my approach to this was a little different, will test that :thumbup:

 

Question in title. Basically can i grab the data from the tpod and save it so i can quickly swap between targets

Yes, my approach to store "target points" for AG weapons until now was to mark a SPI with the TGP(or radar), go to DST 40(thats where the SPI data is saved) and you can copy that into "pre-planned destination points" (for example 36, 37...), setup your weapons to the corresponding PP-point and you are good to go.

Modules: KA-50, A-10C, FC3, UH-1H, MI-8MTV2, CA, MIG-21bis, FW-190D9, Bf-109K4, F-86F, MIG-15bis, M-2000C, SA342 Gazelle, AJS-37 Viggen, F/A-18C, F-14, C-101, FW-190A8, F-16C, F-5E, JF-17, SC, Mi-24P Hind, AH-64D Apache, Mirage F1, F-4E Phantom II

System: Win 11 Pro 64bit, Ryzen 3800X, 32gb RAM DDR4-3200, PowerColor Radeon RX 6900XT Red Devil ,1 x Samsung SSD 970 EVO Plus 2TB NVMe, 2 x Samsung SSD 2TB + 1TB SATA, MFG Crosswind Rudder Pedals - VIRPIL T-50CM and VIRPIL MongoosT-50 Throttle - HP Reverg G2, using only the latest Open Beta, DCS settings

 

Posted (edited)
Can you attack multiple targets with BRM 90s in one pass this way? If you use the tiny increment switch?

 

No, the BRM-9 are laser guided rockets, you have to point a guiding laser(TGP) at the target. But if they are not moving and close to each other you can fire 2 missiles(couple seconds from each other, couldn't manage more myself), wait for impact 1 and slew the TGP to the next target and wait for impact 2. Maybe you could generate WPT's with the SPI copy/paste variant and slave the TGP to them for an attack with the BRM-9 but considering the relative short range of that rocket and the fact you have to guide them i doubt you will get more then 2 kills per pass, at least with my noob skillset in th JF-17.

 

Edit: But multiple glide bombs released at the same time work perfect with that method. :thumbup:

Edited by unknown

Modules: KA-50, A-10C, FC3, UH-1H, MI-8MTV2, CA, MIG-21bis, FW-190D9, Bf-109K4, F-86F, MIG-15bis, M-2000C, SA342 Gazelle, AJS-37 Viggen, F/A-18C, F-14, C-101, FW-190A8, F-16C, F-5E, JF-17, SC, Mi-24P Hind, AH-64D Apache, Mirage F1, F-4E Phantom II

System: Win 11 Pro 64bit, Ryzen 3800X, 32gb RAM DDR4-3200, PowerColor Radeon RX 6900XT Red Devil ,1 x Samsung SSD 970 EVO Plus 2TB NVMe, 2 x Samsung SSD 2TB + 1TB SATA, MFG Crosswind Rudder Pedals - VIRPIL T-50CM and VIRPIL MongoosT-50 Throttle - HP Reverg G2, using only the latest Open Beta, DCS settings

 

Posted

Lol my record is 4 in one pass. I haven't seriously tried but I think I can manage up to 6. I don't wait for target to die before firing second brm. I just move laser before it gets there. I'm wondering if tgp can be made to move automatically. Bet I can get 10 targets in one pass.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...