Oates76 Posted April 9, 2020 Posted April 9, 2020 Hi all, I’ve been using some of the controller profiles downloadable from the DCS website, but when I loaded a profile for the F-5 and configure the pinky button as the modifier (I have the Thrustmaster 1600 stick/throttle/pedals set), it seems to stick on instead of only working when pressed as it does in my other aircraft. So if I press the modifier and release, now all my controls work as “modified” until I hit the modifier button again. In my other setups, it seems to work as a momentary switch, and only modifies while it is being held down. Anyone seen this before of have a quick fix? Thanks in advance! Oates
SVgamer72 Posted April 9, 2020 Posted April 9, 2020 In the control settings there is a “modifier” button on the lower left. When you open it there are 2 windows (left and right). The left side is for modifiers that work when a button is held and the right is a toggle (press to turn on and press again to turn off). Make sure your modifier is setup in the left window and not the right if you want it to work when the button is held. Sent from my iPhone using Tapatalk
Oates76 Posted April 9, 2020 Author Posted April 9, 2020 That did the trick, thanks so much for the help!
silverdevil Posted April 10, 2020 Posted April 10, 2020 In the control settings there is a “modifier” button on the lower left. When you open it there are 2 windows (left and right). The left side is for modifiers that work when a button is held and the right is a toggle (press to turn on and press again to turn off). Make sure your modifier is setup in the left window and not the right if you want it to work when the button is held. Sent from my iPhone using Tapatalk +10 AKA_SilverDevil Join AKA Wardogs Email Address My YouTube “The MIGS came up, the MIGS were aggressive, we tangled, they lost.” - Robin Olds - An American fighter pilot. He was a triple ace. The only man to ever record a confirmed kill while in glide mode.
Recommended Posts