lonewwolf Posted April 28, 2020 Posted April 28, 2020 (edited) I'm having some problems similar to what I already found in this forum I've set my control profiles to sim mode, also in gameplay options "game flight mode" is off. In training every controller works perfectly. but when I load any other flight except training, throttle jerks the "in game" flight stick all over the place. I've tried the same with the A-10C and it works fine. So I assume this must be F/A-18C problem. I've read some users having similar issues, but none like mine, I guess before you ask, there are no axis conflicts. i've checked them several times. And, don't know if it is related but in cold start, I can't change throttle levers from OFF to IDLE (RAlt/RShift + Home), and they're mapped on the keyboard by default, I didn't change anything. Any help? Thank you. Edited April 28, 2020 by lonewwolf
mmoccio Posted April 28, 2020 Posted April 28, 2020 I'm having some problems similar to what I already found in this forum I've set my control profiles to sim mode, also in gameplay options "game flight mode" is off. In training every controller works perfectly. but when I load any other flight except training, throttle jerks the "in game" flight stick all over the place. I've tried the same with the A-10C and it works fine. So I assume this must be F/A-18C problem. I've read some users having similar issues, but none like mine, I guess before you ask, there are no axis conflicts. i've checked them several times. And, don't know if it is related but in cold start, I can't change throttle levers from OFF to IDLE (RAlt/RShift + Home), and they're mapped on the keyboard by default, I didn't change anything. Any help? Thank you. Go to axis assignments, and confirm that the throttle is not mapped to roll, pitch or rudder axis F/A-18C | F-16C | JF-17 | F-14 | FC3 | AV-8B | AJS-37 | F-5E | M-2000C | Mig 15bis | C-101 | F-86 | A-10C | P-51D | Fw 190 A-8 | Christen Eagle II | Bf 109 K-4 | Ryzen 5 2600 | MSI RTX 2070 Super | ASROCK B450m Pro | 16GB G.SKill Ripjaws 3200 DDR4 | 500GB WD Blue Internal SSD | 1TB Samsung Evo 860 SSD | Logitech X56 HOTAS | PSEYE Track IR | Delan Clip | :joystick:
Svsmokey Posted April 28, 2020 Posted April 28, 2020 I'm having some problems similar to what I already found in this forum I've set my control profiles to sim mode, also in gameplay options "game flight mode" is off. In training every controller works perfectly. but when I load any other flight except training, throttle jerks the "in game" flight stick all over the place. I've tried the same with the A-10C and it works fine. So I assume this must be F/A-18C problem. I've read some users having similar issues, but none like mine, I guess before you ask, there are no axis conflicts. i've checked them several times. And, don't know if it is related but in cold start, I can't change throttle levers from OFF to IDLE (RAlt/RShift + Home), and they're mapped on the keyboard by default, I didn't change anything. Any help? Thank you. Welcome to the forums ! Have you tried a repair ? This very useful utility makes it easy to do . https://forums.eagle.ru/showthread.php?t=160053 Select the build (you will see a blue bar on either side) click on "repair" 9700k @ stock , Aorus Pro Z390 wifi , 32gb 3200 mhz CL16 , 1tb EVO 970 , MSI RX 6800XT Gaming X TRIO , Seasonic Prime 850w Gold , Coolermaster H500m , Noctua NH-D15S , CH Pro throttle and T50CM2/WarBrD base on Foxxmounts , CH pedals , Reverb G2v2
lonewwolf Posted April 28, 2020 Author Posted April 28, 2020 (edited) Go to axis assignments, and confirm that the throttle is not mapped to roll, pitch or rudder axis Like i wrote on my post: "there are no axis conflicts" meaning, all of my axis are correctly assigned, and they work perfectly in training mode. Welcome to the forums ! Have you tried a repair ? This very useful utility makes it easy to do . https://forums.eagle.ru/showthread.php?t=160053 Select the build (you will see a blue bar on either side) click on "repair" Thank you! I use that utility too, and i've tried to repair and clean my DCS installation. I also tried to swap controller usb ports. it didn't work. The weirdest thing is it only happens with the F-18, every other aircraft module installed doesn't have any controller issues. Is this an open beta problem? I forget to mention that, I use DCS open beta. Edited April 28, 2020 by lonewwolf
Svsmokey Posted April 28, 2020 Posted April 28, 2020 Weird . If it wasn't just the hornet , i'd recommend a powered usb hub , or entertain ugly thoughts regarding the x56 . Following up on the hornet-only indication , i would rename and move the associated folder in saved games/user/dcs/config/input/fa-18 , run a repair and rebind . 9700k @ stock , Aorus Pro Z390 wifi , 32gb 3200 mhz CL16 , 1tb EVO 970 , MSI RX 6800XT Gaming X TRIO , Seasonic Prime 850w Gold , Coolermaster H500m , Noctua NH-D15S , CH Pro throttle and T50CM2/WarBrD base on Foxxmounts , CH pedals , Reverb G2v2
mmoccio Posted April 28, 2020 Posted April 28, 2020 Have you tried uninstalling the f18 from dcs module manager and then reinstalling it? F/A-18C | F-16C | JF-17 | F-14 | FC3 | AV-8B | AJS-37 | F-5E | M-2000C | Mig 15bis | C-101 | F-86 | A-10C | P-51D | Fw 190 A-8 | Christen Eagle II | Bf 109 K-4 | Ryzen 5 2600 | MSI RTX 2070 Super | ASROCK B450m Pro | 16GB G.SKill Ripjaws 3200 DDR4 | 500GB WD Blue Internal SSD | 1TB Samsung Evo 860 SSD | Logitech X56 HOTAS | PSEYE Track IR | Delan Clip | :joystick:
lonewwolf Posted April 28, 2020 Author Posted April 28, 2020 Problem solved! Thank you all for the suggestions. I've sent a support ticket and I got the answer, it was the Game Avionics Mode active, while I had a F/A-18C Sim profile selected for the controls. I thought "Game Avionics Mode" would only give representation of units outside de cockpit, not changing any of the aircraft systems behavior, that's why I had them activated.
Recommended Posts