[REPORTED]Bf 109 K4 lost Speed/Power DCS 2.5.6.53756 Open Beta

[iFoxRomeo]

Now that the Fw 190 D9 seems to be fixed with new valve springs, it seems that the sagged ones are put into the Kurfürst.

 

 

Max. continuous power at 2400rpm/1.35ATA is fine

When power is set to 2600rpm/1.45ATA you actually loose speed and the engine shows vibrations/signs of detonation.

Max power at 2800rpm/1.78ATA, also vibrations/signs of detonation and significantly slower than in previous DCS OB version.

 

 

Trk and Tacview testflight at SL, 15°C, 760mm/HG, No wind

 

 

Tacview:

Start till approx. 05:02:08 2400rpm/1.35ATA -> Speed ~527km/h

From 05:02:14 powersetting 2600rpm/1.45ATA -> speed drops slowly to 521km/h

At 05:03:48 power to idle to loose some speed, then back to 2600rpm/1.45ATA -> after one minute steady 518km/h

At 05:05:03 2800rpm/1.78ATA MW50, stabilize at 567km/h.

 

That is ~20km/h slower than it was on previous DCS 2.5.6.52437 Open Beta

 

 

 

 

Fox

NewOB_K4.trk

Tacview-20200820-034334-DCS-Testenvironment_speed.txt.acmi.zip

[BIGNEWY]

Reported to the team for futher investigation

 

thanks

[iFoxRomeo]

Reported to the team for futher investigation

 

thanks

 

Thank you

[Snapage]

Slow for me to. Before the update I could do 585km/h at sea level in the K4 at full throttle with MW50. After the update I can only get about 551km/h and the plane shakes constantly at high power setting.

Edited August 20, 2020 by Snapage

[iFoxRomeo]

Fixed in DCS 2.5.6.54046 Open Beta

 

 

Thanks