alip Posted May 3, 2021 Share Posted May 3, 2021 Hello It seems that when the HUD was updated some time ago it broke the CCIP CR modes - 3/9 and 5mil - rendering them more or less useless and CCIP bombing with high drag munitions difficult. When using these modes the designation pipper is cut in half by the bottom of the HUD. Furthermore once target is designated the reticle and pipper are also cut in half by the bottom of the HUD. This is not related to viewing angles or head position, the pippers are always stuck to the bottom of the hud and cut in half, see screenshots: Designation Pipper: Reticle: The issue is present with both versions of A10C and in all maps, single and multiplayer. Steps to reproduce: 1) Load A10C with high drag munitions in mission editor. (MK-82AIR og cluster munitions). Any map, fly mission. 2) After start use the IFFCC test menu to set HUD to 3/9 mode. 3) In flight at a couple thousand feet ALT select CCIP mode and start a slow shallow dive with high drag munitions selected. 4) Designation pipper should be cut in half. 5) Once target is designated, reticle should be cut in half. 6) ??? 7) Profit. Ensure you are in 3/9 mode or 5mil mode, bug is not present in manual release mode. Ensure you are not using low drag munitions, at high speed or in a steep dive (then the designator will not appear since bombing solution will be within the HUD). 1 RTX 3080 12GB * i7-13700K * 64GB DDR5 * Windows 11 Link to comment Share on other sites More sharing options...
Stuka Posted May 3, 2021 Share Posted May 3, 2021 Reported 1 Windows 11 | i9 12900KF | 64GB DDR4 | RTX 3090 | TM Warthog HOTAS | Saitek Combat Rudder Pedals | TM MFDs + Lilliput 8" | TIR5 Pro Link to comment Share on other sites More sharing options...
Recommended Posts