Aernov Posted May 10, 2021 Posted May 10, 2021 Can I set up rockets (Zuni for example) to fire a ripple? Al the settings I have tried resulted in simultaneous launch of all rockets according to selected quantity. So, for example, quantity of 4 with multiplier of 1 results in all rockets from one full Zuni block flying off simultaneously despite setting an interval of 200 ft (or any other); setting multiplier as 2 launches two blocks of 4 rockets at the same moment. And FF rocket mode setting doesn't affect this behaviour as far a I can tell. Is that as it should be working? I remember that it was possible to fire two full Zuni blocks in a ripple by setting QTY 8 (or 4?) MULT 2 INT 200. Also, were FFARs removed?
Schmidtfire Posted May 10, 2021 Posted May 10, 2021 (edited) They have removed the older LAU-3 FFAR (19 rockets, pods with front cover) The newer LAU-68 FFAR pods with 7 rockets are avalible. To use them in a ripple you can set it in the Mission Editor or via Kneeboard with engines off. It will unload the entire tube at one go for a better effect on target area. Ripple settings for rockets are something that is generally set on ground by manually configuring the pod. For Zunis I doubt that you can set exact ripple interval in flight. Edited May 10, 2021 by Schmidtfire
Wisky Posted May 10, 2021 Posted May 10, 2021 vor einer Stunde schrieb Schmidtfire: They have removed the older LAU-3 FFAR (19 rockets, pods with front cover) The newer LAU-68 FFAR pods with 7 rockets are avalible. To use them in a ripple you can set it in the Mission Editor or via Kneeboard with engines off. It will unload the entire tube at one go for a better effect on target area. Ripple settings for rockets are something that is generally set on ground by manually configuring the pod. For Zunis I doubt that you can set exact ripple interval in flight. They have removed the older LAU-3 and LAU-68 FFAR (7 or 19 rockets pods with or without front cover) The newer LAU-68 FFAR Hydra pods with 7 rockets are available.
Recommended Posts