fenmonster Posted August 30, 2021 Share Posted August 30, 2021 Hi Gang, Is Voice attack and the Viacom dcs add on compatible with DCS Beta? I seem to have voice attack ready to go, but I have yet to see the zip file for the DCS viacom add on. I have downloaded the program several times, but I have yet to see the zip file shown in the red circle. I tried the dll file swap with no luck. I have never seen the Viacom control panel and have never been prompted to enter my purchase key anywhere as of yet. I'm hoping I'm just missing something simple. Thanks, Fenmonster Link to comment Share on other sites More sharing options...
Rogue Trooper Posted August 30, 2021 Share Posted August 30, 2021 I am 1 to 2 days behind you brother. Looking forward to the responses. HP G2 Reverb, Windows 10 VR settings: IPD is 64.5mm, High image quality, G2 reset to 60Hz refresh rate as standard. OpenXR user, Open XR tool kit disabled. DCS: Pixel Density 1.0, Forced IPD at 55 (perceived world size), 0 X MSAA, 0 X SSAA. My real IPD is 64.5mm. Prescription VROptition lenses installed. VR Driver system: I9-9900KS 5Ghz CPU. XI Hero motherboard and RTX 3090 graphics card, 64 gigs Ram, No OC at the mo. MT user (2 - 5 fps gain). Vaicom user. Thrustmeter warthog user. MFG pedals with damper upgrade.... and what an upgrade! Total controls Apache MPDs set to virtual Reality height with brail enhancements to ensure 100% button activation.. Simshaker Jet Pro vibration seat.. Uses data from DCS not sound.... you know when you are dropping into VRS with this bad boy. Link to comment Share on other sites More sharing options...
Munkwolf Posted August 30, 2021 Share Posted August 30, 2021 voiceattack and vaicom both work with beta. what red circle? do you have plugin support enabled in voiceattack settings? and put vaicom files in voiceattack/apps folder, then imported the profile into voiceattack? for configuration window, It shows the default hotkey in the log in voiceattack when vaicom loads ("Press LCtl + LAlt + C for config"). or you can verify the hotkey in the voiceattack profile (assuming you have the profile imported). In the About tab of the vaicom configuration window is where you can enter key. page 5 of the user manual is a good guide for this part of the process https://www.vaicompro.com/uploads/7/5/4/3/75436709/vaicom_pro_user_manual.pdf 1 Link to comment Share on other sites More sharing options...
hornblower793 Posted August 31, 2021 Share Posted August 31, 2021 If you have installed the 64-bit version of VoiceAttack (VA) and have used the Vaicom installer you will need to add an additional step.64-bit is a recent development for VA and the Vaicom installer still assumes VA is installed in the Program Files (x86) folder as a 32-bit program. You will therefore need to copy the files from Voiceattack\apps\vaicompro in the x86 folder to Program Files\Voiceattack\apps\vaicomproSent from my SM-T835 using Tapatalk Windows 10 Home ¦ Z370 AORUS Gaming K3 motherboard ¦ i5-8600K oc to 4.3GHz ¦ 48GB Corsair PC4 memory @ 3000MHz ¦ Samsung 960 EVO M.2 SSD for OS, Samsung 860 EVO 1TB SSD for DCS ¦ ASUS ROG GTX 2060 Super 8GB ¦ Virpil WarBRD base with VFX grip, Thrustmaster A10c and F/A-18 grips ¦ VKB Gunfighter Mk2 and MCG ¦ Thrustmaster Warthog Throttle ¦ MFG Crosswinds ¦ Oculus Rift S Link to comment Share on other sites More sharing options...
fenmonster Posted September 1, 2021 Author Share Posted September 1, 2021 On 8/30/2021 at 5:16 PM, Munkwolf said: voiceattack and vaicom both work with beta. what red circle? do you have plugin support enabled in voiceattack settings? and put vaicom files in voiceattack/apps folder, then imported the profile into voiceattack? for configuration window, It shows the default hotkey in the log in voiceattack when vaicom loads ("Press LCtl + LAlt + C for config"). or you can verify the hotkey in the voiceattack profile (assuming you have the profile imported). In the About tab of the vaicom configuration window is where you can enter key. page 5 of the user manual is a good guide for this part of the process https://www.vaicompro.com/uploads/7/5/4/3/75436709/vaicom_pro_user_manual.pdf Hi Munkwolf, I am running in admin mode and plugin support is enabled. I have tried LCtl + LAlt + C for config, but nothing happens. I don't think the actual program is actually loading. Hornblower has a sugestion that I'll try when I'm not wiped out from work lol. Thanks for the suggestions and info. -Fenmonster Link to comment Share on other sites More sharing options...
fenmonster Posted September 1, 2021 Author Share Posted September 1, 2021 17 hours ago, hornblower793 said: If you have installed the 64-bit version of VoiceAttack (VA) and have used the Vaicom installer you will need to add an additional step. 64-bit is a recent development for VA and the Vaicom installer still assumes VA is installed in the Program Files (x86) folder as a 32-bit program. You will therefore need to copy the files from Voiceattack\apps\vaicompro in the x86 folder to Program Files\Voiceattack\apps\vaicompro Sent from my SM-T835 using Tapatalk Hi Hornblower, I will try this suggestion. Probably Wednesday on my day off. Hopefully the file copy/transfer will do the trick. Thanks for the help, Fenmonster Link to comment Share on other sites More sharing options...
fenmonster Posted September 1, 2021 Author Share Posted September 1, 2021 22 hours ago, fenmonster said: Hi Hornblower, I will try this suggestion. Probably Wednesday on my day off. Hopefully the file copy/transfer will do the trick. Thanks for the help, Fenmonster Hi Hornblower, Great suggestion! It seems to be working now. I just need to start figuring out the ins and outs of the commands. Many Thanks! Fenmonster On 8/30/2021 at 4:57 PM, Rogue Trooper said: I am 1 to 2 days behind you brother. Looking forward to the responses. Hi Rogue trooper, This is what Hornblower suggested I try and it worked. if you have installed the 64-bit version of VoiceAttack (VA) and have used the Vaicom installer you will need to add an additional step. 64-bit is a recent development for VA and the Vaicom installer still assumes VA is installed in the Program Files (x86) folder as a 32-bit program. You will therefore need to copy the files from Voiceattack\apps\vaicompro in the x86 folder to Program Files\Voiceattack\apps\vaicompro Hope this helps, Fenmonster 1 Link to comment Share on other sites More sharing options...
Rogue Trooper Posted September 15, 2021 Share Posted September 15, 2021 (edited) Thanks for the heads up fenmonster, I already manually loaded it to the 64 bit file. I had a serious amounts of problems getting it going until I replaced my HP VR Headset Microphone and speakers with a pair of headphones with built in Microphone boom. My main problem seemed to be with microphone drop out from the HP VR G2 headset. Seems to be running sweet now..... kneeboard pops up if I mumble nebord! Truly Superb Kneeboard in Viacom!.... simply supreme! Waiting.... patiently.... for the Hind hook up and co pilot coms package! Edited September 15, 2021 by Rogue Trooper 1 HP G2 Reverb, Windows 10 VR settings: IPD is 64.5mm, High image quality, G2 reset to 60Hz refresh rate as standard. OpenXR user, Open XR tool kit disabled. DCS: Pixel Density 1.0, Forced IPD at 55 (perceived world size), 0 X MSAA, 0 X SSAA. My real IPD is 64.5mm. Prescription VROptition lenses installed. VR Driver system: I9-9900KS 5Ghz CPU. XI Hero motherboard and RTX 3090 graphics card, 64 gigs Ram, No OC at the mo. MT user (2 - 5 fps gain). Vaicom user. Thrustmeter warthog user. MFG pedals with damper upgrade.... and what an upgrade! Total controls Apache MPDs set to virtual Reality height with brail enhancements to ensure 100% button activation.. Simshaker Jet Pro vibration seat.. Uses data from DCS not sound.... you know when you are dropping into VRS with this bad boy. Link to comment Share on other sites More sharing options...
Recommended Posts